This page lists 15 engine parts for the 2000 Honda Insight, across 4 part types, covering the 995cc L3 ELECTRIC/GAS engine. Every part shows its brand, manufacturer part number and fitment notes.
The engine on the 2000 Honda Insight covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Crankshaft Seal (7 parts), Crankshaft Repair Sleeve (4 parts) and Camshaft Seal (2 parts). The other 1 part type covers the remaining 2 parts.
The 2000 Honda Insight came with a single engine, the 995cc L3 ELECTRIC/GAS, and every part is verified against it.
11 brands supply engine parts for the 2000 Honda Insight, led by SCHAEFFLER (3 parts), ELRING (2 parts) and TIMKEN (2 parts), plus 8 more brands.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2000 Honda Insight. 2 parts have it, including FEL-PRO TCS46175 (Crankshaft Seal) and TIMKEN 473677 (Crankshaft Seal). Each part number opens a page with every vehicle that part fits.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | 290710 | 🇺🇸 US 🇨🇦 CA | Inner Diameter [MM]: 40Radial Shaft Seal Design: AwithBS | View on Amazon |
| SCHAEFFLER | SR4134 | 🇺🇸 US 🇨🇦 CA | Rear2.56" I:D X 2.85" O.D. X 0.91" Width | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Camshaft Seal parts for the 2000 Honda Insight come from 2 brands — ELRING and SCHAEFFLER.
Listed part numbers: ELRING 290710 and SCHAEFFLER SR4134.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 54110900 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| TOPLINE | CBSH39 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Conversion / Lower Gasket Set parts are listed for the 2000 Honda Insight, from AJUSA and TOPLINE.
This group includes AJUSA 54110900 and TOPLINE CBSH39.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA | NS99254 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| SCHAEFFLER | SR4134 | 🇺🇸 US 🇨🇦 CA | Rear2.56" I:D X 2.85" O.D. X 0.91" Width | View on Amazon |
| SKF | 99254 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| WJB / INMOTION PARTS | WS99254 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
4 Crankshaft Repair Sleeve parts for the 2000 Honda Insight come from 4 brands — BCA, SCHAEFFLER, SKF and 1 other brand.
Part numbers include BCA NS99254, SCHAEFFLER SR4134 and SKF 99254, among others listed above.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | TCS46175 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| TIMKEN Popular | 473677 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| APEX | ATC1541 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| ELRING | 290710 | 🇺🇸 US 🇨🇦 CA | Inner Diameter [MM]: 40Radial Shaft Seal Design: AwithBS | View on Amazon |
| SCHAEFFLER | SS2641 | 🇺🇸 US 🇨🇦 CA | Front2.17" O.D. X 0.31" Width | View on Amazon |
| TIMKEN | 710610 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| VICTOR REINZ | 181014601 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
7 Crankshaft Seal parts for the 2000 Honda Insight come from 6 brands — TIMKEN, FEL-PRO, APEX and 3 other brands. The "Popular" part is FEL-PRO TCS46175.
Part numbers include FEL-PRO TCS46175, TIMKEN 473677 and APEX ATC1541, among others listed above.
Buying Engine Parts for a 2000 Honda Insight
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 995cc L3 ELECTRIC/GAS engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Crankshaft Seal and Crankshaft Repair Sleeve .
Frequently Asked Questions
How many engine parts fit the 2000 Honda Insight?
Our catalog currently lists 15 engine parts for the 2000 Honda Insight across 4 subcategories and 11 brands, covering the 995cc L3 ELECTRIC/GAS engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 2000 Honda Insight?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2000 Honda Insight was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2000 Honda Insight?
Every part on this page is matched to the 995cc L3 ELECTRIC/GAS engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2000 Honda Insight
Engine Parts for Other Honda Insight Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.