2001 Honda CR-V Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Axle Shaft Seal parts for the 2001 Honda CR-V come from TIMKEN.

This group includes TIMKEN 710629 and TIMKEN SL260470.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

17 CV Axle parts for the 2001 Honda CR-V come from 4 brands — TRAKMOTIVE, TOP NOTCH, GSP and 1 other brand. The "Popular" part is GSP NCV36546.

This table covers the CV Axle Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2001 Honda CR-V — BECK/ARNLEY 0514288.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

8 CV Joint Boot parts for the 2001 Honda CR-V come from 3 brands — DORMAN, MEVOTECH and BECK/ARNLEY. The "Popular" part is DORMAN 03680.

Listed part numbers: DORMAN 03680, MEVOTECH DX610 and BECK/ARNLEY 1032314, plus the other parts above.

This table covers the bearings and races that support the differential carrier. Read more

2 Differential Carrier Bearing / Race parts for the 2001 Honda CR-V come from 2 brands — BECK/ARNLEY and SKF.

Listed part numbers: BECK/ARNLEY 0513879 and SKF 6208ZJ.

This table covers the Differential Carrier bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

3 Differential Carrier Bushing parts for the 2001 Honda CR-V come from 2 brands — BECK/ARNLEY and ENERGY SUSPENSION.

Listed part numbers: BECK/ARNLEY 1042421, BECK/ARNLEY 1042406 and ENERGY SUSPENSION 161114G.

This table covers the dampers that quiet the differential. Read more

3 Differential Dampener parts for the 2001 Honda CR-V come from 3 brands — DORMAN, SKP and ULTRA-POWER.

Part numbers include DORMAN 924448 and SKP SK924448, among others listed above.

This table covers the Differential mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Differential Mount parts are listed for the 2001 Honda CR-V, from DEA / MARMON RIDE CONTROL and WESTAR.

Part numbers include DEA / MARMON RIDE CONTROL A65009 and WESTAR EM5995.

This table covers the bearings and races on the differential pinion. Read more

One part is listed for the 2001 Honda CR-V — SCHAEFFLER KT4.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Pinion Seal parts for the 2001 Honda CR-V come from 2 brands — NATIONAL and TIMKEN.

Part numbers include NATIONAL 711177 and TIMKEN 712551.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

5 Drive Shaft parts are listed for the 2001 Honda CR-V, from SKP, DORMAN, TRAKMOTIVE and 2 other brands. SKP SK654002 carries the "Popular" badge.

This group includes SKP SK654002, DORMAN 936003 and TRAKMOTIVE HOP003 and the remaining parts above.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Drive Shaft Center Support Bearing parts are listed for the 2001 Honda CR-V, from DEA / MARMON RIDE CONTROL, DORMAN, WESTAR and 2 other brands. DANA 25141745X carries the "Popular" badge.

In the Economy grade, DEA / MARMON RIDE CONTROL, DORMAN and WESTAR supply 3 parts: the catalog's value-priced group. A representative part number is DEA / MARMON RIDE CONTROL A6032.

The Standard Replacement section lists 2 options from DANA and ANCHOR — built to original-equipment specification. DANA 25141745X is listed in this group.

Listed part numbers: DANA 25141745X, DEA / MARMON RIDE CONTROL A6032 and DORMAN 934003, plus the other parts above.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

3 Gear Oil parts for the 2001 Honda CR-V come from VALVOLINE.

Part numbers include VALVOLINE VV3246, VALVOLINE 773775 and VALVOLINE 881051.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Transfer Case Input Shaft Bearing parts for the 2001 Honda CR-V come from 3 brands — SCHAEFFLER, SKF and TIMKEN.

Listed part numbers: SCHAEFFLER 32008XA, SKF 32008XVP and TIMKEN 207.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

2 Transfer Case Input Shaft Repair Sleeve parts are listed for the 2001 Honda CR-V, from SCHAEFFLER and TIMKEN.

This group includes SCHAEFFLER SR3477 and TIMKEN KWK99149.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2001 Honda CR-V — TIMKEN 710247.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Transfer Case Output Shaft Bearing parts are listed for the 2001 Honda CR-V, from SKF, SCHAEFFLER, WJB / INMOTION PARTS and 1 other brand. SKF L44610VP carries the "Popular" badge.

Economy: 1 part, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WTL44610.

The Standard Replacement section: 5 options from SKF, SCHAEFFLER and TIMKEN. SKF L44610VP is listed in this group.

Listed part numbers: SKF L44610VP, WJB / INMOTION PARTS WTL44610 and SKF BR4, plus the other parts above.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Output Shaft Seal parts for the 2001 Honda CR-V come from 2 brands — SCHAEFFLER and SKF.

Listed part numbers: SCHAEFFLER SS2622 and SKF 15709.