2001 Honda CR-V Engine Parts

This table covers the Camshaft caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

This group shows a single part: AJUSA 00794900.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

16 Camshaft Seal parts are listed for the 2001 Honda CR-V, from APEX, FEL-PRO, MAHLE / CLEVITE and 13 other brands. APEX ATC1120 carries the "Popular" badge.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Circular / Semi-Circular Plug parts are listed for the 2001 Honda CR-V, from APEX and VICTOR REINZ.

This group includes APEX ACP101 and VICTOR REINZ 711552200.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRH18L.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

12 Connecting Rod Bearing parts for the 2001 Honda CR-V come from 6 brands — MAHLE / CLEVITE, KING ENGINE BEARINGS, ENGINETECH and 3 other brands. The "Popular" part is MAHLE / CLEVITE CB1461HN.

The High Performance section lists 5 options from KING ENGINE BEARINGS and MAHLE / CLEVITE — engineered beyond original-equipment specification. MAHLE / CLEVITE CB1461HN is listed in this group.

In the Standard Replacement grade, MAHLE / CLEVITE, ENGINETECH, ITM ENGINE COMPONENTS and 3 other brands supply 7 parts: built to original-equipment specification. A representative part number is MAHLE / CLEVITE CB1461P.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Conversion / Lower Gasket Set parts for the 2001 Honda CR-V come from 7 brands — APEX, ENGINETECH, AJUSA and 4 other brands. The "Popular" part is APEX ACS1018.

This group includes APEX ACS1018, ENGINETECH HO20CSA and AJUSA 54069500 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Crankshaft Main Bearing parts are listed for the 2001 Honda CR-V, from MAHLE / CLEVITE, KING ENGINE BEARINGS, TOPLINE and 3 other brands. KING ENGINE BEARINGS MB5259AM carries the "Popular" badge.

High Performance: 3 parts, from MAHLE / CLEVITE and KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB5259XPC.

The Standard Replacement section: 7 options from TOPLINE, KING ENGINE BEARINGS, MAHLE / CLEVITE and 3 other brands. KING ENGINE BEARINGS MB5259AM is listed in this group.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

8 Crankshaft Repair Sleeve parts are listed for the 2001 Honda CR-V, from BCA, WJB / INMOTION PARTS, FEL-PRO and 3 other brands. BCA NS99315 carries the "Popular" badge.

Listed part numbers: BCA NS99315, FEL-PRO 16275 and BCA NS99147, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

29 Crankshaft Seal parts are listed for the 2001 Honda CR-V, from VICTOR REINZ, ELRING, SCHAEFFLER and 12 other brands. APEX ABS100 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts for the 2001 Honda CR-V come from 2 brands — APEX and SKP.

Listed part numbers: APEX AHB118 and SKP SKHB012.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Cylinder Head Gasket parts for the 2001 Honda CR-V come from 8 brands — ELRING, ITM ENGINE COMPONENTS, ENGINETECH and 5 other brands. The "Popular" part is ENGINETECH HHO20C.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Cylinder Head Gasket Set parts for the 2001 Honda CR-V come from 11 brands — VICTOR REINZ, APEX, ENGINETECH and 8 other brands. The "Popular" part is APEX AHS1036.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2001 Honda CR-V — MAHLE / CLEVITE B32774.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO HO1228101.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts for the 2001 Honda CR-V come from 5 brands — ENGINETECH, AJUSA, APEX and 2 other brands. The "Popular" part is ENGINETECH HO20K1.

Part numbers include ENGINETECH HO20K1, AJUSA 50180200 and APEX AFS1036, among others listed above.

This table covers the Engine rebuild kits. Read more

This group shows a single part: ENGINETECH RCHO20P.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Exhaust Valve parts are listed for the 2001 Honda CR-V, from MELLING, SKP, ENGINETECH and 4 other brands. MELLING V5196 carries the "Popular" badge.

Listed part numbers: MELLING V5196, SKP SKV2547 and ENGINETECH EM2493, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts for the 2001 Honda CR-V come from 4 brands — SKP, ATP, DAYCO and 1 other brand.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594354 is listed in this group.

Standard Replacement: 3 parts, from ATP, DAYCO and PIONEER. A representative part number is ATP 102328.

Part numbers include SKP SK594354, ATP 102328 and DAYCO PB1577N, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Intake Manifold Gasket parts for the 2001 Honda CR-V come from 8 brands — MAHLE / CLEVITE, BECK/ARNLEY, ELRING and 5 other brands. The "Popular" part is APEX AMS1360.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

8 Intake Valve parts are listed for the 2001 Honda CR-V, from SBI, SKP, BECK/ARNLEY and 5 other brands. SBI 10742 carries the "Popular" badge.

Part numbers include SBI 10742, SKP SKV4583 and BECK/ARNLEY 0213335, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

39 Motor Mount parts are listed for the 2001 Honda CR-V, from WESTAR, DEA / MARMON RIDE CONTROL, ANCHOR and 4 other brands. DEA / MARMON RIDE CONTROL A6520 carries the "Popular" badge. Grades run from Economy through Standard Replacement; Standard Replacement is the most populated section, led by WESTAR, DEA / MARMON RIDE CONTROL, ANCHOR and 3 other brands.

This table covers the Motor Mount inserts. Read more

This group shows a single part: ENERGY SUSPENSION 161113G.

This table covers the Motor Mount kits. Read more

3 Motor Mount Kit parts are listed for the 2001 Honda CR-V, from DEA / MARMON RIDE CONTROL and ANCHOR.

This group includes ANCHOR 301172, DEA / MARMON RIDE CONTROL MK5512 and DEA / MARMON RIDE CONTROL MK5511.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

78 Oil parts are listed for the 2001 Honda CR-V, from VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. MOBIL 125195 carries the "Popular" badge. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 1 other brand.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2001 Honda CR-V come from HAYDEN.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

One part is listed for the 2001 Honda CR-V — DORMAN 917436.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts are listed for the 2001 Honda CR-V, from DORMAN, ELRING, AGS and 2 other brands. AGS ODP00007 carries the "Popular" badge.

Listed part numbers: AGS ODP00007, DORMAN 090053 and BECK/ARNLEY 0160088, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts for the 2001 Honda CR-V come from 6 brands — DORMAN, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is DORMAN 095144.

Part numbers include DORMAN 095144, FEL-PRO 73346 and AJUSA 22007400, among others listed above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts are listed for the 2001 Honda CR-V, from BECK/ARNLEY, GATES, MOTORAD and 1 other brand.

Part numbers include BECK/ARNLEY 0160125, GATES 31109 and MOTORAD MO81, among others listed above.