2001 Honda Prelude Automatic Transmission Parts

This table covers the vents on a transmission or axle housing. Read more

This group shows a single part: DORMAN 14161.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

RAYBESTOS POWERTRAIN supplies both parts for the 2001 Honda Prelude.

The Friction Plate Pack section lists 1 option from RAYBESTOS POWERTRAIN — grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN RCP96222 is listed in this group.

In the Steel Plate Pack grade, RAYBESTOS POWERTRAIN supplies 1 part: grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN STMHONDA25.

Part numbers include RAYBESTOS POWERTRAIN RCP96222 and RAYBESTOS POWERTRAIN STMHONDA25.

This table covers the Dipstick / Fluid Filler tubes. Read more

One part is listed for the 2001 Honda Prelude — DORMAN 921076.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

6 Filter parts are listed for the 2001 Honda Prelude, from VAICO, PA CARGO, VARIOUS MFR and 2 other brands. PA CARGO 98710E carries the "Popular" badge.

In the Economy grade, PA CARGO and VARIOUS MFR supply 2 parts: the catalog's value-priced group. A representative part number is PA CARGO 98710E.

The Standard Replacement section lists 4 options from VAICO, RAYBESTOS POWERTRAIN and ATP — built to original-equipment specification. RAYBESTOS POWERTRAIN 515952 is listed in this group.

Part numbers include PA CARGO 98710E, VARIOUS MFR PT99126 and RAYBESTOS POWERTRAIN 515952, among others listed above.

This table covers the Fluid Pan drain plugs. Read more

This group shows a single part: DORMAN 090178.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Manual Shaft Seal parts for the 2001 Honda Prelude come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS221207, NATIONAL 221207 and WJB / INMOTION PARTS WS221207.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

7 Output Shaft Repair Sleeve parts are listed for the 2001 Honda Prelude, from NATIONAL, BCA, WJB / INMOTION PARTS and 1 other brand. NATIONAL 99139 carries the "Popular" badge.

Listed part numbers: NATIONAL 99139, NATIONAL 99157 and BCA NS99139, plus the other parts above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

12 Output Shaft Seal parts are listed for the 2001 Honda Prelude, from ATP, NATIONAL, BCA and 4 other brands. ATP HO29 carries the "Popular" badge.

This table covers the rebuild kits for this assembly. Read more

6 Rebuild Kit parts for the 2001 Honda Prelude come from 3 brands — PA CARGO, PIONEER and TRANSTEC. The "Popular" part is PA CARGO MRK9800E.

The Banner Kit (Overhaul Kit + Friction Clutch Plates) section lists 1 option from PA CARGO — grouped under the catalog's "Banner Kit (Overhaul Kit + Friction Clutch Plates)" designation — the notes column spells out what sets them apart. PA CARGO DK9800ES is listed in this group.

The Deluxe Kit (Master Kit + Filter, Band & Common Bushings) section lists 1 option from PA CARGO — grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. PA CARGO MRK9800E is listed in this group.

In the Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) grade, PA CARGO supplies 1 part: grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO DK9800E.

The Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) section lists 3 options from PA CARGO, PIONEER and TRANSTEC — grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. PA CARGO K98900E is listed in this group.

Part numbers include PA CARGO MRK9800E, PA CARGO DK9800ES and PA CARGO DK9800E, among others listed above.

This table covers the wear sleeves used to restore a Shift Shaft seal surface. Read more

This group shows a single part: SKF 99049.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Shift Shaft Seal parts for the 2001 Honda Prelude come from 4 brands — ATP, PIONEER, SCHAEFFLER and 1 other brand. The "Popular" part is ATP HO22.

Part numbers include ATP HO22, ATP HO23 and PIONEER 759172, among others listed above.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

9 Shift Solenoid parts for the 2001 Honda Prelude come from 5 brands — ATP, ROSTRA, STANDARD MOTOR PRODUCTS and 2 other brands. The "Popular" part is ROSTRA 520475.

In the Single Solenoid grade, ROSTRA, ATP, STANDARD MOTOR PRODUCTS and 1 other brand supply 7 parts: grouped under the catalog's "Single Solenoid" designation — the notes column spells out what sets them apart. A representative part number is ROSTRA 520475.

In the Solenoid Pack / Kit grade, ATP and PIONEER supply 2 parts: grouped under the catalog's "Solenoid Pack / Kit" designation — the notes column spells out what sets them apart. A representative part number is ATP HE12.

Listed part numbers: ROSTRA 520475, WELLS 2N1221 and ATP HE10, plus the other parts above.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

One part is listed for the 2001 Honda Prelude — TC REMANUFACTURING HO26.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

3 Torque Converter Clutch Solenoid parts are listed for the 2001 Honda Prelude, from WELLS and STANDARD MOTOR PRODUCTS.

Listed part numbers: STANDARD MOTOR PRODUCTS TCS106, WELLS 2N1245 and WELLS 2N1142.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Torque Converter Shaft Seal parts for the 2001 Honda Prelude come from 5 brands — NATIONAL, ATP, BCA and 2 other brands. The "Popular" part is NATIONAL 350609.

Listed part numbers: NATIONAL 350609, ATP HO21 and BCA NS350609, plus the other parts above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

9 Transmission Fluid parts are listed for the 2001 Honda Prelude, from VALVOLINE, IDEMITSU, AISIN and 3 other brands. AISIN ATFDW1 carries the "Popular" badge.

The DW-1 section lists 1 option from AISIN — grouped under the catalog's "DW-1" designation — the notes column spells out what sets them apart. AISIN ATFDW1 is listed in this group.

In the Multi-Vehicle grade, VALVOLINE, LUBEGARD and MOBIL supply 5 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE VV3246.

In the Type T-4 (Type T-IV) grade, IDEMITSU supplies 2 parts: grouped under the catalog's "Type T-4 (Type T-IV)" designation — the notes column spells out what sets them apart. A representative part number is IDEMITSU 30040093750.

In the Z-1 grade, BECK/ARNLEY supplies 1 part: grouped under the catalog's "Z-1" designation — the notes column spells out what sets them apart. A representative part number is BECK/ARNLEY 2522004.

This group includes AISIN ATFDW1, VALVOLINE VV3246 and LUBEGARD 69032 and the remaining parts above.

This table covers the conditioners and additives used with this transmission fluid. Read more

8 Transmission Fluid Additive parts are listed for the 2001 Honda Prelude, from LUBEGARD and ATP. LUBEGARD 19610 carries the "Popular" badge.

This group includes LUBEGARD 19610, LUBEGARD 60902 and ATP AT203 and the remaining parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Transmission Mount parts for the 2001 Honda Prelude come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

Part numbers include ANCHOR 9183, DEA / MARMON RIDE CONTROL A4513 and PIONEER 624513, among others listed above.