2001 Honda Prelude Engine Parts

This table covers the seals at the Auxiliary Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2001 Honda Prelude — SKF 10584.

This table covers the Balance Shaft belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

12 Balance Shaft Belt parts are listed for the 2001 Honda Prelude, from GATES, CLOYES, ITM ENGINE COMPONENTS and 8 other brands. CLOYES B186 carries the "Popular" badge.

In the Economy grade, CLOYES, ITM ENGINE COMPONENTS, PREFERRED COMPONENTS INC and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is CLOYES B186.

In the High Performance grade, GATES supplies 1 part: engineered beyond original-equipment specification. A representative part number is GATES T186RB.

The Standard Replacement section lists 7 options from CONTINENTAL, GATES, ACDELCO and 4 other brands — built to original-equipment specification. CONTINENTAL 40186 is listed in this group.

This table covers the Balance Shaft Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Balance Shaft Belt Tensioner parts for the 2001 Honda Prelude come from 6 brands — GMB, SKP, GATES and 3 other brands. The "Popular" part is GMB 4359030.

This group includes GMB 4359030, SKP SK85479 and GATES T41022 and the remaining parts above.

This table covers the seals at the Balance Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Balance Shaft Seal parts are listed for the 2001 Honda Prelude, from BCA, CONTINENTAL, ITM ENGINE COMPONENTS and 1 other brand.

This group includes BCA NS712009, CONTINENTAL CS9021 and ITM ENGINE COMPONENTS 1500917 and the remaining parts above.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2001 Honda Prelude — FEL-PRO ES72476.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

This group shows a single part: SCHAEFFLER SR3460.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

13 Camshaft Seal parts for the 2001 Honda Prelude come from 13 brands — FEL-PRO, MAHLE / CLEVITE, TIMKEN and 10 other brands. The "Popular" part is FEL-PRO TCS45987.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Circular / Semi-Circular Plug parts for the 2001 Honda Prelude come from 2 brands — APEX and VICTOR REINZ.

Listed part numbers: APEX ACP101 and VICTOR REINZ 711552200.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Connecting Rod Bearing parts are listed for the 2001 Honda Prelude, from MAHLE / CLEVITE, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. ENGINETECH BB1520 carries the "Popular" badge.

High Performance: 2 parts, from MAHLE / CLEVITE. A representative part number is MAHLE / CLEVITE CB1780H.

The Standard Replacement section: 6 options from MAHLE / CLEVITE, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. ENGINETECH BB1520 is listed in this group.

Listed part numbers: ENGINETECH BB1520, MAHLE / CLEVITE CB1780H and MAHLE / CLEVITE CB1780HX, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts are listed for the 2001 Honda Prelude, from ENGINETECH, AJUSA, APEX and 2 other brands. ENGINETECH HO22CSB carries the "Popular" badge.

Listed part numbers: ENGINETECH HO22CSB, AJUSA 54084800 and APEX ACS1033, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

13 Crankshaft Main Bearing parts for the 2001 Honda Prelude come from 5 brands — KING ENGINE BEARINGS, TOPLINE, MAHLE / CLEVITE and 2 other brands. The "Popular" part is ENGINETECH BC1516.

The High Performance section: 3 options from KING ENGINE BEARINGS and MAHLE / CLEVITE. KING ENGINE BEARINGS MB5568XP is listed in this group.

Standard Replacement: 10 parts, from TOPLINE, KING ENGINE BEARINGS, MAHLE / CLEVITE and 2 other brands. A representative part number is ENGINETECH BC1516.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts for the 2001 Honda Prelude come from 5 brands — SCHAEFFLER, TIMKEN, BCA and 2 other brands. The "Popular" part is BCA NS99315.

Part numbers include BCA NS99315, FEL-PRO 16275 and SCHAEFFLER SR3483, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

19 Crankshaft Seal parts for the 2001 Honda Prelude come from 12 brands — FEL-PRO, NATIONAL, VICTOR REINZ and 9 other brands. The "Popular" part is FEL-PRO BS40430.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts are listed for the 2001 Honda Prelude, from AJUSA, ARP and BECK/ARNLEY.

Listed part numbers: AJUSA 81027500, ARP 2084304 and BECK/ARNLEY 0161033.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Cylinder Head Gasket parts are listed for the 2001 Honda Prelude, from ENGINETECH, FEL-PRO, AJUSA and 5 other brands. ENGINETECH HHO22B carries the "Popular" badge.

Part numbers include ENGINETECH HHO22B, FEL-PRO 26411PT and AJUSA 10111900, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Cylinder Head Gasket Set parts are listed for the 2001 Honda Prelude, from ENGINETECH, FEL-PRO, APEX and 4 other brands. ENGINETECH HO22HSF carries the "Popular" badge.

This group includes ENGINETECH HO22HSF, FEL-PRO HS26411PT and APEX AHS1045 and the remaining parts above.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: MAHLE / CLEVITE B32774.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

MELLING supplies both parts for the 2001 Honda Prelude.

Listed part numbers: MELLING CSL1146 and MELLING CSL2246.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11419.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts are listed for the 2001 Honda Prelude, from ENGINETECH, AJUSA, APEX and 2 other brands. ENGINETECH HO22K5 carries the "Popular" badge.

Listed part numbers: ENGINETECH HO22K5, AJUSA 50164100 and APEX AFS1045, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts for the 2001 Honda Prelude come from 4 brands — ITM ENGINE COMPONENTS, ENGINETECH, SBI and 1 other brand. The "Popular" part is ENGINETECH EM2763.

Part numbers include ENGINETECH EM2763, ITM ENGINE COMPONENTS RX9559 and ITM ENGINE COMPONENTS RX9559HP, among others listed above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

2 Harmonic Balancer parts are listed for the 2001 Honda Prelude, from ATP and DORMAN.

This group includes ATP 102373 and DORMAN 594581.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Intake Manifold Gasket parts are listed for the 2001 Honda Prelude, from FEL-PRO, MAHLE / CLEVITE, APEX and 4 other brands. APEX AMS1380 carries the "Popular" badge.

This group includes APEX AMS1380, FEL-PRO MS97045 and AJUSA 13110300 and the remaining parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Plenum Gasket parts for the 2001 Honda Prelude come from 6 brands — BECK/ARNLEY, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is BECK/ARNLEY 0374802.

Part numbers include BECK/ARNLEY 0374802, FEL-PRO MS947811 and AJUSA 01130300, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts for the 2001 Honda Prelude come from 4 brands — ITM ENGINE COMPONENTS, ENGINETECH, SBI and 1 other brand. The "Popular" part is ENGINETECH IM2762.

Part numbers include ENGINETECH IM2762, ITM ENGINE COMPONENTS RV9549 and ITM ENGINE COMPONENTS RV9549HP, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

10 Motor Mount parts for the 2001 Honda Prelude come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 1 other brand. The "Popular" part is ANCHOR 8806.

This table covers the Motor Mount inserts. Read more

One part is listed for the 2001 Honda Prelude — ENERGY SUSPENSION 161103G.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

61 Oil parts for the 2001 Honda Prelude come from 6 brands — LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. The "Popular" part is MOBIL 125195. Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend are all represented, and Full Synthetic alone accounts for 38 parts.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2001 Honda Prelude.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

9 Oil Drain Plug parts for the 2001 Honda Prelude come from 6 brands — DORMAN, ELRING, AGS and 3 other brands. The "Popular" part is DORMAN 090033.

Part numbers include DORMAN 090033, DORMAN 090053 and AGS ODP00007, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 2001 Honda Prelude, from DORMAN, APEX, ELRING and 2 other brands. DORMAN 095144 carries the "Popular" badge.

This group includes DORMAN 095144, APEX ADP1909 and ELRING 243600 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts for the 2001 Honda Prelude come from 3 brands — GATES, MOTORAD and SKP.

This group includes GATES 31109, MOTORAD MO81 and SKP SKMO81.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

21 Oil Filter parts for the 2001 Honda Prelude come from 16 brands — VARIOUS MFR, BOSCH, FRAM and 13 other brands. The "Popular" part is MOBIL M1104A.

The Economy section: 6 options from VARIOUS MFR, BOSCH, FRAM and 2 other brands. BOSCH 72228WS is listed in this group.

The High Performance / Heavy Duty section lists 3 options from MOBIL, WIX and FRAM — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1104A is listed in this group.

Standard Replacement: 12 parts, from BOSCH, DENSO, WIX and 9 other brands. A representative part number is BOSCH 3312.

This table covers the oil pans that hold the engine's oil sump. Read more

4 Oil Pan parts are listed for the 2001 Honda Prelude, from DORMAN, SKP, SPECTRA PREMIUM and 1 other brand.

Listed part numbers: DORMAN 264272, SKP SKHOP29A and SPECTRA PREMIUM HOP29A, plus the other parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Oil Pan Gasket parts for the 2001 Honda Prelude come from 5 brands — FEL-PRO, VICTOR REINZ, AJUSA and 2 other brands. The "Popular" part is FEL-PRO OS30632R.

This group includes FEL-PRO OS30632R, VICTOR REINZ 703141410 and AJUSA 00791300 and the remaining parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

2 Oil Pump parts for the 2001 Honda Prelude come from 2 brands — SKP and TOPLINE.

The Economy section: 1 option from SKP. SKP SKOM311 is listed in this group.

Standard Replacement: 1 part, from TOPLINE. A representative part number is TOPLINE OPH29.

This group includes SKP SKOM311 and TOPLINE OPH29.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2001 Honda Prelude — AJUSA 00723000.

This table covers the wear sleeves used to restore a Oil Pump seal surface. Read more

2 Oil Pump Repair Sleeve parts are listed for the 2001 Honda Prelude, from SCHAEFFLER and TIMKEN.

Part numbers include SCHAEFFLER SR3460 and TIMKEN KWK99106.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Oil Pump Seal parts are listed for the 2001 Honda Prelude, from SCHAEFFLER, TIMKEN, BCA and 3 other brands. SCHAEFFLER SS2237 carries the "Popular" badge.

This group includes SCHAEFFLER SS2237, TIMKEN 712009 and BCA NS712009 and the remaining parts above.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

3 Piston parts are listed for the 2001 Honda Prelude, from ENGINETECH and TOPLINE.

Part numbers include ENGINETECH K47414P, ENGINETECH P4741 and TOPLINE PAH28L.

This table covers the rings that seal each piston to the cylinder wall. Read more

6 Piston Ring parts are listed for the 2001 Honda Prelude, from HASTINGS MANUFACTURING, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. ENGINETECH S87314 carries the "Popular" badge.

The Premium section lists 1 option from ENGINETECH — a step above OE specification in materials, tolerances or warranty terms. ENGINETECH S87314 is listed in this group.

The Standard Replacement section: 5 options from HASTINGS MANUFACTURING, ITM ENGINE COMPONENTS and TOPLINE. HASTINGS MANUFACTURING 2C4767 is listed in this group.

Listed part numbers: ENGINETECH S87314, HASTINGS MANUFACTURING 2C4767 and HASTINGS MANUFACTURING 4601, plus the other parts above.

This table covers the Re-Ring kits. Read more

This group shows a single part: ENGINETECH RMHO22DP.