2004 Honda Element Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Axle Shaft Seal parts are listed for the 2004 Honda Element, from SKF, TIMKEN and WJB / INMOTION PARTS.

This group includes SKF 13771A, TIMKEN SL260470 and WJB / INMOTION PARTS WS13771A.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

17 CV Axle parts are listed for the 2004 Honda Element, from APWI, TRAKMOTIVE, GSP and 2 other brands. APWI HO8377 carries the "Popular" badge.

In the Economy grade, CARDONE supplies 1 part: the catalog's value-priced group. A representative part number is CARDONE 604214.

The Standard Replacement section lists 16 options from APWI, TRAKMOTIVE, GSP and 2 other brands — built to original-equipment specification. APWI HO8377 is listed in this group.

This table covers the CV Axle Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: BECK/ARNLEY 0514288.

This table covers the CV Intermediate shafts. Read more

4 CV Intermediate Shaft parts for the 2004 Honda Element come from 3 brands — TRAKMOTIVE, GSP and TOP NOTCH.

This group includes GSP NEX36008, TOP NOTCH TN50324IS and TRAKMOTIVE HO3555 and the remaining parts above.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

6 CV Joint Boot parts are listed for the 2004 Honda Element, from DORMAN, MEVOTECH and BECK/ARNLEY. DORMAN 614003 carries the "Popular" badge.

This group includes DORMAN 614003, MEVOTECH DX610 and BECK/ARNLEY 1032314 and the remaining parts above.

This table covers the bearings and races that support the differential carrier. Read more

5 Differential Carrier Bearing / Race parts are listed for the 2004 Honda Element, from SKF, BCA and SCHAEFFLER. SKF BR138 carries the "Popular" badge.

This group includes SKF BR138, BCA NB208S and SCHAEFFLER 6208Z and the remaining parts above.

This table covers the dampers that quiet the differential. Read more

3 Differential Dampener parts are listed for the 2004 Honda Element, from DORMAN, SKP and ULTRA-POWER.

Listed part numbers: DORMAN 924441 and SKP SK924441, plus the other parts above.

This table covers the Differential mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Differential Mount parts for the 2004 Honda Element come from 6 brands — DORMAN, SKP, AUTOTECNICA and 3 other brands. The "Popular" part is DORMAN 905539.

Listed part numbers: DORMAN 905539, SKP SKMA65010 and AUTOTECNICA HA0420172, plus the other parts above.

This table covers the bearings and races on the differential pinion. Read more

5 Differential Pinion Bearing / Race parts for the 2004 Honda Element come from 3 brands — SCHAEFFLER, TIMKEN and ACDELCO. The "Popular" part is TIMKEN SET4.

This group includes TIMKEN SET4, ACDELCO A4 and SCHAEFFLER L44610 and the remaining parts above.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Differential Pinion Seal parts are listed for the 2004 Honda Element, from TIMKEN and NATIONAL.

Part numbers include NATIONAL 711177, TIMKEN 712551 and TIMKEN 450803.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

2 Differential Repair Sleeve parts for the 2004 Honda Element come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 99139 and WJB / INMOTION PARTS WS99139.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Seal parts for the 2004 Honda Element come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 711087 and WJB / INMOTION PARTS WS711087.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

7 Drive Shaft parts for the 2004 Honda Element come from 7 brands — SKP, WJB / INMOTION PARTS, CARDONE and 4 other brands. The "Popular" part is SKP SK936007.

This group includes SKP SK936007, WJB / INMOTION PARTS WDS36007 and CARDONE 654003 and the remaining parts above.

This table covers the seals at the Transfer Case Companion Flange. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Companion Flange Seal parts are listed for the 2004 Honda Element, from ATP and PIONEER.

Part numbers include ATP HO36 and PIONEER 759072.

This table covers the Transfer Case mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Transfer Case Mount parts for the 2004 Honda Element come from 2 brands — ANCHOR and PIONEER.

Listed part numbers: ANCHOR 9879 and PIONEER 629879.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Transfer Case Output Shaft Bearing parts for the 2004 Honda Element come from 5 brands — SCHAEFFLER, SKF, NSK and 2 other brands. The "Popular" part is ACDELCO A4.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS WTL44610 is listed in this group.

Standard Replacement: 8 parts, from SCHAEFFLER, SKF, NSK and 1 other brand. A representative part number is ACDELCO A4.

Part numbers include ACDELCO A4, WJB / INMOTION PARTS WTL44610 and SKF BR4, among others listed above.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Output Shaft Seal parts are listed for the 2004 Honda Element, from SCHAEFFLER and SKF.

This group includes SCHAEFFLER SS2622 and SKF 15709.