2012 Honda CR-V Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Axle Shaft Seal parts for the 2012 Honda CR-V come from 3 brands — SKF, TIMKEN and WJB / INMOTION PARTS.

This group includes SKF 12605A, TIMKEN SL260469 and WJB / INMOTION PARTS WS12605A.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

16 CV Axle parts for the 2012 Honda CR-V come from 6 brands — TOP NOTCH, TRAKMOTIVE, GSP and 3 other brands. The "Popular" part is APWI HO8354.

The Economy section lists 1 option from AUTO EXTRA — the catalog's value-priced group. AUTO EXTRA HO88870 is listed in this group.

In the Standard Replacement grade, TOP NOTCH, TRAKMOTIVE, GSP and 2 other brands supply 15 parts: built to original-equipment specification. A representative part number is APWI HO8354.

This table covers the CV Axle Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2012 Honda CR-V — BECK/ARNLEY 0514288.

This table covers the constant-velocity joints at each end of a drive axle. Read more

2 CV Joint parts for the 2012 Honda CR-V come from ACKOJA.

This group includes ACKOJA A269887 and ACKOJA A269889.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

4 CV Joint Boot parts for the 2012 Honda CR-V come from 2 brands — BECK/ARNLEY and MEVOTECH.

This group includes BECK/ARNLEY 1032937, BECK/ARNLEY 1032659 and MEVOTECH DX626 and the remaining parts above.

This table covers the bearings and races that support the differential carrier. Read more

5 Differential Carrier Bearing / Race parts for the 2012 Honda CR-V come from 5 brands — ULTRA-POWER, WJB / INMOTION PARTS, NATIONAL and 2 other brands. The "Popular" part is NATIONAL 30208.

The Economy section: 2 options from ULTRA-POWER and WJB / INMOTION PARTS. ULTRA-POWER WT30208 is listed in this group.

Standard Replacement: 3 parts, from NATIONAL, BCA and SKF. A representative part number is NATIONAL 30208.

Part numbers include NATIONAL 30208 and ULTRA-POWER WT30208, among others listed above.

This table covers the bearings and races on the differential pinion. Read more

SCHAEFFLER supplies the 3 Differential Pinion Bearing / Race parts for the 2012 Honda CR-V.

Part numbers include SCHAEFFLER L44610, SCHAEFFLER KL44649 and SCHAEFFLER KT4.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Differential Pinion Seal parts for the 2012 Honda CR-V come from 3 brands — SCHAEFFLER, SKF and WJB / INMOTION PARTS.

This group includes SCHAEFFLER SS2622, SCHAEFFLER SS6611 and SKF 12605A and the remaining parts above.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2012 Honda CR-V — SCHAEFFLER SS6611.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

8 Drive Shaft parts are listed for the 2012 Honda CR-V, from SKP, CARDONE, DORMAN and 5 other brands. SKP SK936103 carries the "Popular" badge.

This group includes SKP SK936103, CARDONE 654008 and DORMAN 976347 and the remaining parts above.

This table covers the seals at the Transfer Case Companion Flange. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Companion Flange Seal parts for the 2012 Honda CR-V come from 2 brands — ATP and PIONEER.

Part numbers include ATP HO36 and PIONEER 759072.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Transfer Case Output Shaft Bearing parts are listed for the 2012 Honda CR-V, from SKF, SCHAEFFLER, WJB / INMOTION PARTS and 1 other brand. ACDELCO A4 carries the "Popular" badge.

Economy: 1 part, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WTL44610.

The Standard Replacement section: 5 options from SKF, SCHAEFFLER and ACDELCO. ACDELCO A4 is listed in this group.

This group includes ACDELCO A4, WJB / INMOTION PARTS WTL44610 and SKF BR4 and the remaining parts above.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Output Shaft Seal parts for the 2012 Honda CR-V come from 2 brands — SCHAEFFLER and SKF.

Listed part numbers: SCHAEFFLER SS2622 and SKF 15709.