2012 Honda CR-V Engine Parts

This table covers the chains that drive the balance shafts. Read more

7 Balance Shaft Chain parts for the 2012 Honda CR-V come from 3 brands — S.A. GEAR, INA and MELLING. The "Popular" part is MELLING 712F.

In the Chain Only grade, S.A. GEAR, MELLING and INA supply 5 parts: grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. A representative part number is MELLING 712F.

The Kit section lists 2 options from INA — grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. INA ZC76233 is listed in this group.

This group includes MELLING 712F, S.A. GEAR C712F and INA ZCC712F and the remaining parts above.

This table covers the guides that keep the balance-shaft chain on its path. Read more

6 Balance Shaft Chain Guide parts for the 2012 Honda CR-V come from 6 brands — INA, S.A. GEAR, BECK/ARNLEY and 3 other brands. The "Popular" part is INA ZG95570.

Listed part numbers: INA ZG95570, S.A. GEAR 7518 and BECK/ARNLEY 0241929, plus the other parts above.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Balance Shaft Chain Tensioner parts are listed for the 2012 Honda CR-V, from INA, S.A. GEAR, CLOYES and 3 other brands. INA ZT95791 carries the "Popular" badge.

Part numbers include INA ZT95791, S.A. GEAR 91037 and CLOYES 95791, among others listed above.

This table covers the Balance Shaft sprockets. Read more

5 Balance Shaft Sprocket parts for the 2012 Honda CR-V come from 5 brands — MELLING, CLOYES, FVP and 2 other brands. The "Popular" part is MELLING S939.

This group includes MELLING S939 and the remaining parts above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Connecting Rod Bearing parts for the 2012 Honda CR-V come from 4 brands — KING ENGINE BEARINGS, MAHLE / CLEVITE, ENGINETECH and 1 other brand. The "Popular" part is MAHLE / CLEVITE CB1861H.

The High Performance section lists 4 options from MAHLE / CLEVITE and KING ENGINE BEARINGS — engineered beyond original-equipment specification. MAHLE / CLEVITE CB1861H is listed in this group.

In the Standard Replacement grade, ENGINETECH, KING ENGINE BEARINGS and TOPLINE supply 3 parts: built to original-equipment specification. A representative part number is ENGINETECH BB1013.

Part numbers include MAHLE / CLEVITE CB1861H, KING ENGINE BEARINGS CR4542XPCX and KING ENGINE BEARINGS CR4542XPC, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Conversion / Lower Gasket Set parts for the 2012 Honda CR-V come from 7 brands — FEL-PRO, APEX, ENGINETECH and 4 other brands. The "Popular" part is APEX ACS1050.

This group includes APEX ACS1050, ENGINETECH HO20CSB and AJUSA 54253500 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts are listed for the 2012 Honda CR-V, from KING ENGINE BEARINGS, TOPLINE and ENGINETECH. KING ENGINE BEARINGS MB5568AM carries the "Popular" badge.

High Performance: 1 part, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB5568XP.

The Standard Replacement section: 4 options from TOPLINE, KING ENGINE BEARINGS and ENGINETECH. KING ENGINE BEARINGS MB5568AM is listed in this group.

Listed part numbers: KING ENGINE BEARINGS MB5568AM, KING ENGINE BEARINGS MB5568XP and ENGINETECH BC1518, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts are listed for the 2012 Honda CR-V, from SCHAEFFLER, BCA, NATIONAL and 1 other brand. BCA NS99315 carries the "Popular" badge.

Part numbers include BCA NS99315, NATIONAL 99315 and SCHAEFFLER SR3549, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

25 Crankshaft Seal parts are listed for the 2012 Honda CR-V, from ELRING, VICTOR REINZ, FEL-PRO and 10 other brands. FEL-PRO TCS46051 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

8 Cylinder Head Bolt parts for the 2012 Honda CR-V come from 8 brands — ENGINETECH, MAHLE / CLEVITE, AJUSA and 5 other brands. The "Popular" part is ENGINETECH HB261.

Part numbers include ENGINETECH HB261, MAHLE / CLEVITE GS33604 and AJUSA 81041700, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Cylinder Head Gasket parts for the 2012 Honda CR-V come from 6 brands — ELRING, APEX, FEL-PRO and 3 other brands. The "Popular" part is APEX AHG165.

This group includes APEX AHG165, FEL-PRO 26435PT and AJUSA 10194000 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Cylinder Head Gasket Set parts for the 2012 Honda CR-V come from 10 brands — ENGINETECH, FEL-PRO, BECK/ARNLEY and 7 other brands. The "Popular" part is BECK/ARNLEY 0323027.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2012 Honda CR-V.

This group includes KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO HO1228137.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts for the 2012 Honda CR-V come from 2 brands — AJUSA and TOPLINE.

Listed part numbers: AJUSA 50441000 and TOPLINE CGSH50.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts are listed for the 2012 Honda CR-V, from MELLING, ENGINETECH, QUALCAST and 2 other brands. MELLING V5562 carries the "Popular" badge.

This group includes MELLING V5562, ENGINETECH EM4479 and QUALCAST 1013359 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts for the 2012 Honda CR-V come from 4 brands — ATP, SKP, DAYCO and 1 other brand. The "Popular" part is SKP SK594386.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594386 is listed in this group.

Standard Replacement: 4 parts, from ATP, DAYCO and ULTRA-POWER. A representative part number is ATP 102353.

Listed part numbers: SKP SK594386, ATP 102353 and ATP 102395, plus the other parts above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

2 Intake Manifold parts are listed for the 2012 Honda CR-V, from AUTOTECNICA and SKP.

This group includes AUTOTECNICA HA1419311 and SKP SK615106.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Intake Manifold Gasket parts for the 2012 Honda CR-V come from 7 brands — ELRING, FEL-PRO, MAHLE / CLEVITE and 4 other brands. The "Popular" part is FEL-PRO MS97093.

Part numbers include FEL-PRO MS97093, MAHLE / CLEVITE MS19718 and AJUSA 13234300, among others listed above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Plenum Gasket parts are listed for the 2012 Honda CR-V, from APEX, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

This group includes APEX AMS1652, FEL-PRO MS97057 and MAHLE / CLEVITE MS19487 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts are listed for the 2012 Honda CR-V, from MELLING, ENGINETECH, QUALCAST and 2 other brands. MELLING V5561 carries the "Popular" badge.

Part numbers include MELLING V5561, ENGINETECH IM4478 and QUALCAST 1013358, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

10 Motor Mount parts are listed for the 2012 Honda CR-V, from DEA / MARMON RIDE CONTROL, SKP, ANCHOR and 2 other brands. SKP SKMA65053 carries the "Popular" badge.

Economy: 2 parts, from SKP. A representative part number is SKP SKMA65053.

The Standard Replacement section: 8 options from DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 1 other brand. ANCHOR 9815 is listed in this group.

This table covers the Motor Mount kits. Read more

One part is listed for the 2012 Honda CR-V — ANCHOR 300408.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

41 Oil parts are listed for the 2012 Honda CR-V, from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. LIQUI MOLY 22044 carries the "Popular" badge. Grades run from Full Synthetic through Racing; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, IDEMITSU and 3 other brands.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2012 Honda CR-V come from HAYDEN.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts are listed for the 2012 Honda CR-V, from DORMAN, ELRING, AGS and 2 other brands. DORMAN 090033 carries the "Popular" badge.

Part numbers include DORMAN 090033, DORMAN 090053 and AGS ODP00007, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts for the 2012 Honda CR-V come from 6 brands — DORMAN, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is DORMAN 095144.

Part numbers include DORMAN 095144, FEL-PRO 73346 and AJUSA 22007400, among others listed above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts are listed for the 2012 Honda CR-V, from CALORSTAT, DORMAN, GATES and 1 other brand.

This group includes CALORSTAT OC2335, DORMAN 80985 and GATES 31284 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts are listed for the 2012 Honda CR-V, from BOSCH, VARIOUS MFR, WIX and 11 other brands. WIX 57356XP carries the "Popular" badge.

Economy: 4 parts, from BOSCH, FVP, PRO-TEC and 1 other brand. A representative part number is BOSCH 72226WS.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 57356XP.

The Standard Replacement section: 11 options from BOSCH, DENSO, WIX and 8 other brands. BOSCH 3323 is listed in this group.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Oil Filter Adapter Gasket / O-Ring parts for the 2012 Honda CR-V come from 2 brands — FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: FEL-PRO ES72748 and MAHLE / CLEVITE GS33532.

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Filter Gasket parts for the 2012 Honda CR-V come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO ES73006, MAHLE / CLEVITE GS33592 and VICTOR REINZ 181007601.

This table covers the Oil Filter housings. Read more

2 Oil Filter Housing parts for the 2012 Honda CR-V come from 2 brands — AUTOTECNICA and SKP.

Listed part numbers: AUTOTECNICA HA1423098 and SKP SK103507.

This table covers the Oil Filter Support tubes. Read more

This group shows a single part: AUTOTECNICA HA1416938.

This table covers the oil pans that hold the engine's oil sump. Read more

5 Oil Pan parts for the 2012 Honda CR-V come from 5 brands — SKP, ACKOJA, AUTOTECNICA and 2 other brands. The "Popular" part is SKP SK264455.

This group includes SKP SK264455, ACKOJA A260266 and AUTOTECNICA HA1415246 and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Pan Gasket parts are listed for the 2012 Honda CR-V, from VICTOR REINZ, APEX and MAHLE / CLEVITE.

This group includes APEX AOP149, MAHLE / CLEVITE OS32297 and VICTOR REINZ 703141410 and the remaining parts above.

This table covers the chains that drive the oil pump. Read more

4 Oil Pump Chain parts for the 2012 Honda CR-V come from 3 brands — PREFERRED COMPONENTS INC, CLOYES and FVP.

The Economy section: 1 option from PREFERRED COMPONENTS INC. PREFERRED COMPONENTS INC C762 is listed in this group.

The Kit section: 1 option from PREFERRED COMPONENTS INC. PREFERRED COMPONENTS INC TS21834 is listed in this group.

Standard Replacement: 2 parts, from CLOYES and FVP. A representative part number is CLOYES C712F.

Listed part numbers: PREFERRED COMPONENTS INC C762, PREFERRED COMPONENTS INC TS21834 and CLOYES C712F, plus the other parts above.

This table covers the Oil Pump Chain guides. Read more

This group shows a single part: PREFERRED COMPONENTS INC R76018.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2012 Honda CR-V — PREFERRED COMPONENTS INC T66158.

This table covers the Oil Pump Drive gears. Read more

This group shows a single part: PREFERRED COMPONENTS INC G56118.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

2 Piston parts for the 2012 Honda CR-V come from 2 brands — MAHLE / CLEVITE and TOPLINE.

In the Premium grade, MAHLE / CLEVITE supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is MAHLE / CLEVITE 2243999.

Standard Replacement: 1 part, from TOPLINE. A representative part number is TOPLINE PAH50C.

Part numbers include MAHLE / CLEVITE 2243999 and TOPLINE PAH50C.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Piston Pin Bushing parts are listed for the 2012 Honda CR-V, from ENGINETECH and TOPLINE.

Listed part numbers: ENGINETECH EB0154 and TOPLINE PBD34.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts for the 2012 Honda CR-V come from 3 brands — HASTINGS MANUFACTURING, MAHLE / CLEVITE and ITM ENGINE COMPONENTS. The "Popular" part is HASTINGS MANUFACTURING 2C5147.

Premium: 1 part, from MAHLE / CLEVITE. A representative part number is MAHLE / CLEVITE 42306CP.

Standard Replacement: 4 parts, from HASTINGS MANUFACTURING and ITM ENGINE COMPONENTS. A representative part number is HASTINGS MANUFACTURING 2C5147.

Part numbers include HASTINGS MANUFACTURING 2C5147, MAHLE / CLEVITE 42306CP and HASTINGS MANUFACTURING 2C5147S, among others listed above.

This table covers the Thrust washers. Read more

4 Thrust Washer parts are listed for the 2012 Honda CR-V, from ENGINE PRO, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand.

This group includes ENGINE PRO 13473S, ENGINETECH TW1536 and ITM ENGINE COMPONENTS 1T1001 and the remaining parts above.