2012 Honda Fit Automatic Transmission Parts

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

One part is listed for the 2012 Honda Fit — RAYBESTOS POWERTRAIN RCP96221.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

7 Filter parts are listed for the 2012 Honda Fit, from VARIOUS MFR, BECK/ARNLEY, VAICO and 1 other brand. BECK/ARNLEY 0440434 carries the "Popular" badge.

In the Economy grade, VARIOUS MFR supplies 2 parts: the catalog's value-priced group. A representative part number is VARIOUS MFR PT99445.

The Standard Replacement section lists 5 options from BECK/ARNLEY, VAICO and ATP — built to original-equipment specification. BECK/ARNLEY 0440434 is listed in this group.

Listed part numbers: BECK/ARNLEY 0440434, VARIOUS MFR PT99445 and VARIOUS MFR PT99447, plus the other parts above.

This table covers the Fluid Pan drain plugs. Read more

This group shows a single part: DORMAN 090178.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Fluid Pump Seal parts for the 2012 Honda Fit come from 2 brands — SCHAEFFLER and SKF.

Part numbers include SCHAEFFLER SS2781 and SKF 18124.

This table covers the seals at the Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Input Shaft Seal parts for the 2012 Honda Fit come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 220918 and WJB / INMOTION PARTS WS220918.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Manual Shaft Seal parts for the 2012 Honda Fit come from 4 brands — BCA, NATIONAL, TIMKEN and 1 other brand.

Listed part numbers: BCA NS221207 and NATIONAL 221207, plus the other parts above.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

3 Output Shaft Repair Sleeve parts are listed for the 2012 Honda Fit, from BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS99139, NATIONAL 99139 and WJB / INMOTION PARTS WS99139.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

13 Output Shaft Seal parts are listed for the 2012 Honda Fit, from SCHAEFFLER, NATIONAL, SKF and 4 other brands. NATIONAL 710315 carries the "Popular" badge.

This table covers the rebuild kits for this assembly. Read more

4 Rebuild Kit parts for the 2012 Honda Fit come from 2 brands — PA CARGO and TRANSTEC.

The Deluxe Kit (Master Kit + Filter, Band & Common Bushings) section lists 1 option from PA CARGO — grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. PA CARGO MRK8800W is listed in this group.

In the Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) grade, PA CARGO supplies 1 part: grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO DK8800W.

The Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) section lists 2 options from PA CARGO and TRANSTEC — grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. PA CARGO K88900W is listed in this group.

Part numbers include PA CARGO MRK8800W, PA CARGO DK8800W and PA CARGO K88900W, among others listed above.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

6 Shift Solenoid parts for the 2012 Honda Fit come from 4 brands — STANDARD MOTOR PRODUCTS, BECK/ARNLEY, ACKOJA and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS TCS123.

In the Single Solenoid grade, STANDARD MOTOR PRODUCTS and BECK/ARNLEY supply 3 parts: grouped under the catalog's "Single Solenoid" designation — the notes column spells out what sets them apart. A representative part number is STANDARD MOTOR PRODUCTS TCS123.

In the Solenoid Pack / Kit grade, STANDARD MOTOR PRODUCTS supplies 1 part: grouped under the catalog's "Solenoid Pack / Kit" designation — the notes column spells out what sets them apart. A representative part number is STANDARD MOTOR PRODUCTS TCS318.

2 further parts sit outside the graded sections, with the same engine-level match.

Listed part numbers: STANDARD MOTOR PRODUCTS TCS123, STANDARD MOTOR PRODUCTS TCS136 and BECK/ARNLEY 0470013, plus the other parts above.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Torque Converter Shaft Seal parts for the 2012 Honda Fit come from 4 brands — BCA, NATIONAL, TIMKEN and 1 other brand.

Part numbers include BCA NS350609 and NATIONAL 350609, among others listed above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

17 Transmission Fluid parts are listed for the 2012 Honda Fit, from VALVOLINE, LIQUI MOLY, PENTOSIN and 6 other brands. ACDELCO 109243 carries the "Popular" badge.

The ATF 64 section lists 2 options from PENTOSIN — grouped under the catalog's "ATF 64" designation — the notes column spells out what sets them apart. PENTOSIN 1058113 is listed in this group.

In the Dexron grade, ACDELCO supplies 1 part: grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109243.

The DW-1 section lists 1 option from AISIN — grouped under the catalog's "DW-1" designation — the notes column spells out what sets them apart. AISIN ATFDW1 is listed in this group.

In the Multi-Vehicle grade, VALVOLINE, LIQUI MOLY, LUCAS OIL and 2 other brands supply 10 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 126505.

In the Type III (H) grade, IDEMITSU supplies 2 parts: grouped under the catalog's "Type III (H)" designation — the notes column spells out what sets them apart. A representative part number is IDEMITSU 30040090750.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

LUBEGARD supplies the 7 Transmission Fluid Additive parts for the 2012 Honda Fit. LUBEGARD 19610 carries the "Popular" badge.

Part numbers include LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 61910, among others listed above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Transmission Mount parts for the 2012 Honda Fit come from 5 brands — WESTAR, SKP, ANCHOR and 2 other brands. The "Popular" part is ANCHOR 10031.

The Economy section: 1 option from SKP. SKP SKMA65012 is listed in this group.

Standard Replacement: 5 parts, from WESTAR, ANCHOR, DEA / MARMON RIDE CONTROL and 1 other brand. A representative part number is ANCHOR 10031.

This group includes ANCHOR 10031, SKP SKMA65012 and DEA / MARMON RIDE CONTROL A65012 and the remaining parts above.