2012 Honda Fit Engine Parts

This table covers the Camshaft caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

One part is listed for the 2012 Honda Fit — AJUSA 00794900.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Camshaft Seal parts for the 2012 Honda Fit come from 4 brands — APEX, FEL-PRO, JAPANESE OE and 1 other brand.

This group includes APEX ATC1540, FEL-PRO TCS46212 and JAPANESE OE A6622 and the remaining parts above.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Circular / Semi-Circular Plug parts for the 2012 Honda Fit come from 2 brands — APEX and VICTOR REINZ.

Part numbers include APEX ACP101 and VICTOR REINZ 711552200.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Connecting Rod Bearing parts are listed for the 2012 Honda Fit, from ENGINETECH, MAHLE / CLEVITE and TOPLINE.

This group includes ENGINETECH BB1065, MAHLE / CLEVITE CB1862A4 and TOPLINE RBH42.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts are listed for the 2012 Honda Fit, from AJUSA, APEX, FEL-PRO and 1 other brand.

Part numbers include AJUSA 54172900, APEX ACS1054 and FEL-PRO CS26529, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Crankshaft Main Bearing parts for the 2012 Honda Fit come from 3 brands — TOPLINE, ENGINETECH and MAHLE / CLEVITE.

This group includes ENGINETECH BC1050, MAHLE / CLEVITE MS2266A and TOPLINE TWH16 and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts for the 2012 Honda Fit come from 6 brands — BCA, TIMKEN, NATIONAL and 3 other brands. The "Popular" part is BCA NS99315.

This group includes BCA NS99315, TIMKEN KWK99315 and NATIONAL 99315 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Crankshaft Seal parts for the 2012 Honda Fit come from 11 brands — APEX, SCHAEFFLER, VICTOR REINZ and 8 other brands. The "Popular" part is APEX ABS128.

This table covers the bolts that clamp the cylinder head to the block. Read more

6 Cylinder Head Bolt parts are listed for the 2012 Honda Fit, from APEX, FEL-PRO, AJUSA and 3 other brands. APEX AHB164 carries the "Popular" badge.

This group includes APEX AHB164, FEL-PRO ES72449 and AJUSA 81034300 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts are listed for the 2012 Honda Fit, from FEL-PRO, AJUSA, APEX and 2 other brands. FEL-PRO 26529PT carries the "Popular" badge.

Listed part numbers: FEL-PRO 26529PT, AJUSA 10193300 and APEX AHG167, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Cylinder Head Gasket Set parts are listed for the 2012 Honda Fit, from FEL-PRO, APEX, AJUSA and 3 other brands. APEX AHS1068 carries the "Popular" badge.

This group includes APEX AHS1068, FEL-PRO HS26529PT2 and AJUSA 52284200 and the remaining parts above.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: MAHLE / CLEVITE B32774.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2012 Honda Fit come from KAT'S HEATERS.

Listed part numbers: KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

One part is listed for the 2012 Honda Fit — TECHPRO HO1228125.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts are listed for the 2012 Honda Fit, from AJUSA, APEX, ITM ENGINE COMPONENTS and 1 other brand.

This group includes AJUSA 50304000, APEX AFS1068 and ITM ENGINE COMPONENTS 0900960 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: TOPLINE EVH42L.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

One part is listed for the 2012 Honda Fit — DAYCO PB1714N.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts are listed for the 2012 Honda Fit, from MAHLE / CLEVITE, FEL-PRO, APEX and 2 other brands. FEL-PRO MS97174 carries the "Popular" badge.

Listed part numbers: FEL-PRO MS97174, APEX AMS1681 and MAHLE / CLEVITE MS19815, plus the other parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Plenum Gasket parts for the 2012 Honda Fit come from 5 brands — FEL-PRO, APEX, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO MS97178.

Part numbers include FEL-PRO MS97178, APEX AMS1680 and MAHLE / CLEVITE MS19816, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: TOPLINE IVH42L.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Motor Mount parts for the 2012 Honda Fit come from 5 brands — DEA / MARMON RIDE CONTROL, SKP, ANCHOR and 2 other brands. The "Popular" part is SKP SKMA65001.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SKMA65001 is listed in this group.

In the Standard Replacement grade, DEA / MARMON RIDE CONTROL, ANCHOR, BECK/ARNLEY and 1 other brand supply 5 parts: built to original-equipment specification. A representative part number is DEA / MARMON RIDE CONTROL A65001HY.

This group includes SKP SKMA65001, DEA / MARMON RIDE CONTROL A65001HY and ANCHOR 9602 and the remaining parts above.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 301096.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

36 Oil parts for the 2012 Honda Fit come from 6 brands — LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. The "Popular" part is LIQUI MOLY 22044. Full Synthetic and High Mileage (>75,000 Miles) are all represented, and Full Synthetic alone accounts for 29 parts.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2012 Honda Fit.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

This group shows a single part: DORMAN 921097.

This table covers the drain plugs in the oil pan. Read more

7 Oil Drain Plug parts for the 2012 Honda Fit come from 5 brands — DORMAN, AGS, ENGINETECH and 2 other brands. The "Popular" part is DORMAN 090033.

Listed part numbers: DORMAN 090033, DORMAN 090053 and AGS ODP00007, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 2012 Honda Fit, from DORMAN, AJUSA, APEX and 2 other brands. DORMAN 095144 carries the "Popular" badge.

Listed part numbers: DORMAN 095144, AJUSA 22007400 and APEX ADP1909, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2012 Honda Fit come from 4 brands — CALORSTAT, DORMAN, GATES and 1 other brand.

Part numbers include CALORSTAT OC2335, DORMAN 80985 and GATES 31284, among others listed above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts for the 2012 Honda Fit come from 14 brands — BOSCH, VARIOUS MFR, WIX and 11 other brands. The "Popular" part is WIX 57356XP.

The Economy section: 4 options from BOSCH, FVP, PRO-TEC and 1 other brand. BOSCH 72226WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 57356XP is listed in this group.

Standard Replacement: 11 parts, from BOSCH, DENSO, WIX and 8 other brands. A representative part number is BOSCH 3323.

This table covers the Oil Filter Support tubes. Read more

One part is listed for the 2012 Honda Fit — AUTOTECNICA HA1416938.

This table covers the oil pans that hold the engine's oil sump. Read more

7 Oil Pan parts are listed for the 2012 Honda Fit, from SKP, SPECTRA PREMIUM, ULTRA-POWER and 2 other brands. SKP SK264456 carries the "Popular" badge.

Part numbers include SKP SK264456, ULTRA-POWER 264456 and ACKOJA A260281, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Pan Gasket parts for the 2012 Honda Fit come from 5 brands — VICTOR REINZ, FEL-PRO, AJUSA and 2 other brands. The "Popular" part is FEL-PRO OS30837R.

Listed part numbers: FEL-PRO OS30837R, VICTOR REINZ 703141410 and AJUSA 14090600, plus the other parts above.

This table covers the seals at the Oil Pressure Sender / Switch. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: FEL-PRO 73196.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Oil Pump parts for the 2012 Honda Fit come from 3 brands — SKP, MELLING and TOPLINE.

The Economy section: 1 option from SKP. SKP SKM533 is listed in this group.

Standard Replacement: 2 parts, from MELLING and TOPLINE. A representative part number is MELLING M533.

This group includes SKP SKM533, MELLING M533 and TOPLINE OPH42.

This table covers the wear sleeves used to restore a Oil Pump seal surface. Read more

3 Oil Pump Repair Sleeve parts are listed for the 2012 Honda Fit, from BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS99157, NATIONAL 99157 and WJB / INMOTION PARTS WS99157.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Oil Pump Seal parts are listed for the 2012 Honda Fit, from NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 711005 and WJB / INMOTION PARTS WS711005.

This table covers the gaskets that seal the Oil Strainer. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2012 Honda Fit — AJUSA 01239000.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

One part is listed for the 2012 Honda Fit — TOPLINE PAH42L.

This table covers the rings that seal each piston to the cylinder wall. Read more

6 Piston Ring parts are listed for the 2012 Honda Fit, from HASTINGS MANUFACTURING, ENGINETECH and TOPLINE. ENGINETECH S73124 carries the "Popular" badge.

The Premium section lists 1 option from ENGINETECH — a step above OE specification in materials, tolerances or warranty terms. ENGINETECH S73124 is listed in this group.

The Standard Replacement section: 5 options from HASTINGS MANUFACTURING and TOPLINE. HASTINGS MANUFACTURING 2C5253 is listed in this group.

Listed part numbers: ENGINETECH S73124, HASTINGS MANUFACTURING 2C5253 and HASTINGS MANUFACTURING 2C5253S, plus the other parts above.

This table covers the Thrust washers. Read more

This group shows a single part: ITM ENGINE COMPONENTS 1T1001.

This table covers the Timing Cam sprockets. Read more

5 Timing Cam Sprocket parts for the 2012 Honda Fit come from 5 brands — CLOYES, FVP, INA and 2 other brands. The "Popular" part is CLOYES S968T.

Part numbers include CLOYES S968T and INA ZSS968T, among others listed above.

This table covers the timing chains that keep the cams in time with the crank. Read more

5 Timing Chain parts are listed for the 2012 Honda Fit, from S.A. GEAR, CLOYES, FVP and 2 other brands. S.A. GEAR C1101 carries the "Popular" badge.

Part numbers include S.A. GEAR C1101 and CLOYES C731F, among others listed above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

9 Timing Chain & Component Kit parts for the 2012 Honda Fit come from 5 brands — PREFERRED COMPONENTS INC, S.A. GEAR, CLOYES and 2 other brands. The "Popular" part is CLOYES 90731SX.

The Economy section: 4 options from PREFERRED COMPONENTS INC and S.A. GEAR. PREFERRED COMPONENTS INC TS17133 is listed in this group.

Standard Replacement: 5 parts, from CLOYES, INA and TOPLINE. A representative part number is CLOYES 90731SX.

This group includes CLOYES 90731SX, PREFERRED COMPONENTS INC TS17133 and PREFERRED COMPONENTS INC TS22133 and the remaining parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

6 Timing Chain Guide / Damper parts are listed for the 2012 Honda Fit, from S.A. GEAR, CLOYES, INA and 1 other brand. S.A. GEAR 91163 carries the "Popular" badge.

Part numbers include S.A. GEAR 91163, S.A. GEAR 71163 and CLOYES 95643, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

4 Timing Chain Tensioner parts for the 2012 Honda Fit come from 4 brands — CLOYES, FVP, INA and 1 other brand.

This group includes CLOYES 95641 and INA ZT95641 and the remaining parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE JV5159.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

This group shows a single part: SKF 99163.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Timing Cover Seal parts for the 2012 Honda Fit come from 3 brands — SKF, MAHLE / CLEVITE and SCHAEFFLER.

This group includes MAHLE / CLEVITE 67932, SCHAEFFLER SS5126 and SKF 15818 and the remaining parts above.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

5 Timing Crank Sprocket parts for the 2012 Honda Fit come from 5 brands — S.A. GEAR, CLOYES, FVP and 2 other brands. The "Popular" part is S.A. GEAR S1388.

Listed part numbers: S.A. GEAR S1388 and CLOYES S967, plus the other parts above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

9 Torque Strut Mount parts are listed for the 2012 Honda Fit, from SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. SKP SKMA4574 carries the "Popular" badge.

Economy: 2 parts, from SKP. A representative part number is SKP SKMA4574.

The Standard Replacement section: 7 options from ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 1 other brand. ANCHOR 9533 is listed in this group.

Listed part numbers: SKP SKMA4574, SKP SKMA4563 and ANCHOR 9533, plus the other parts above.

This table covers the Valve covers. Read more

One part is listed for the 2012 Honda Fit — ACKOJA A260331.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 2012 Honda Fit come from 5 brands — FEL-PRO, APEX, BECK/ARNLEY and 2 other brands. The "Popular" part is FEL-PRO VS50785R.

Listed part numbers: FEL-PRO VS50785R, APEX AVC168 and BECK/ARNLEY 0361976, plus the other parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

5 Valve Guide parts for the 2012 Honda Fit come from 3 brands — SBI, QUALCAST and TOPLINE. The "Popular" part is SBI 1408157.

This group includes SBI 1408157, QUALCAST 308157 and QUALCAST 308158 and the remaining parts above.

This table covers the Valve Spring retainers. Read more

One part is listed for the 2012 Honda Fit — MELLING VSR729.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

3 Valve Spring Retainer Keeper parts are listed for the 2012 Honda Fit, from MELLING, QUALCAST and SBI.

This group includes MELLING VL1060, QUALCAST 345008 and SBI 1211060.