2013 Honda Insight Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

15 Coolant / Antifreeze parts for the 2013 Honda Insight come from 7 brands — PRESTONE, PEAK, BECK/ARNLEY and 4 other brands. The "Popular" part is FVP MV5050GAL.

In the Compatible With All Colors grade, PRESTONE supplies 1 part: grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. A representative part number is PRESTONE AF3055.

The Economy section lists 3 options from FVP, PEAK and PRESTONE — the catalog's value-priced group. FVP MV5050GAL is listed in this group.

In the Premium grade, PRESTONE and PEAK supply 5 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is PRESTONE AF2100.

In the Standard Replacement grade, BECK/ARNLEY, VALVOLINE, AISIN and 2 other brands supply 6 parts: built to original-equipment specification. A representative part number is VALVOLINE 861398.

This table covers the hard pipes and extra hoses in the coolant circuit. Read more

2 Coolant Hose / Pipe parts for the 2013 Honda Insight come from 2 brands — CONTINENTAL and DAYCO.

Part numbers include CONTINENTAL 63156 and DAYCO 70944.

This table covers the seals at the Coolant Hose / Pipe. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Coolant Hose / Pipe Seal parts are listed for the 2013 Honda Insight, from AJUSA, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include AJUSA 16022400, AJUSA 16022450 and MAHLE / CLEVITE C32870, among others listed above.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

3 Coolant Reservoir parts are listed for the 2013 Honda Insight, from DORMAN, GPD and TECHPRO.

Listed part numbers: DORMAN 603075, GPD 2411014 and TECHPRO HO3014149.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

3 Coolant Reservoir Cap parts are listed for the 2013 Honda Insight, from CALORSTAT, DORMAN and MOTORAD.

Part numbers include CALORSTAT RC0174, DORMAN 54228 and MOTORAD T108.

This table covers the Cooling Fan control modules. Read more

US MOTOR WORKS supplies the 3 Cooling Fan Control Module parts for the 2013 Honda Insight.

Listed part numbers: US MOTOR WORKS 16749, US MOTOR WORKS 16789 and US MOTOR WORKS 16795.

This table covers the adapters used to pressure-test this cooling system. Read more

3 Cooling System Tester Adapter parts for the 2013 Honda Insight come from 2 brands — MOTORAD and GATES.

This group includes GATES 31409, MOTORAD 3124 and MOTORAD 3125.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

6 Radiator parts for the 2013 Honda Insight come from 6 brands — CSF, TYC, AGILITY and 3 other brands. The "Popular" part is CSF 3483.

This group includes CSF 3483, TYC 13105 and AGILITY 8013105 and the remaining parts above.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

6 Radiator Cap parts for the 2013 Honda Insight come from 5 brands — MOTORAD, CSF, GATES and 2 other brands. The "Popular" part is CSF 4514.

In the Locking Replacement grade, MOTORAD supplies 1 part: grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. A representative part number is MOTORAD ST37.

Standard Replacement: 5 parts, from CSF, GATES, CALORSTAT and 2 other brands. A representative part number is CSF 4514.

This group includes CSF 4514, MOTORAD ST37 and GATES 31412 and the remaining parts above.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

6 Radiator Fan Assembly parts are listed for the 2013 Honda Insight, from GPD, AGILITY, TYC and 3 other brands. AGILITY 6010017 carries the "Popular" badge.

Economy: 1 part, from GPD. A representative part number is GPD 2811347.

The Standard Replacement section: 5 options from AGILITY, TYC, FOUR SEASONS and 2 other brands. AGILITY 6010017 is listed in this group.

Part numbers include AGILITY 6010017, GPD 2811347 and TYC 601250, among others listed above.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

3 Radiator Hose parts are listed for the 2013 Honda Insight, from CONTINENTAL and GATES.

Part numbers include CONTINENTAL 66674, CONTINENTAL 66673 and GATES 23571.

This table covers the Radiator Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2013 Honda Insight — DORMAN 927241.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

13 Temperature Sender / Sensor parts for the 2013 Honda Insight come from 11 brands — STANDARD MOTOR PRODUCTS, HOLSTEIN, CALORSTAT and 8 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS TX215T.

The Economy section: 6 options from HOLSTEIN, STANDARD MOTOR PRODUCTS, CALORSTAT and 2 other brands. STANDARD MOTOR PRODUCTS TX215T is listed in this group.

Standard Replacement: 7 parts, from STANDARD MOTOR PRODUCTS, WELLS, BECK/ARNLEY and 4 other brands. A representative part number is STANDARD MOTOR PRODUCTS TX215.

This table covers the Temperature Sender / Sensor O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Temperature Sender / Sensor O-Ring parts for the 2013 Honda Insight come from 2 brands — APEX and FEL-PRO.

Listed part numbers: APEX AWO2407 and FEL-PRO 72926.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

12 Thermostat parts are listed for the 2013 Honda Insight, from MOTORAD, JAPANESE OE, AISIN and 5 other brands. MOTORAD 5328170 carries the "Popular" badge.

The Heavy Duty section lists 1 option from MOTORAD — rated for severe service. MOTORAD 5328170 is listed in this group.

In the Performance grade, MOTORAD supplies 1 part: engineered beyond original-equipment specification. A representative part number is MOTORAD 2328170.

The Premium section: 1 option from MOTORAD. MOTORAD 7328170 is listed in this group.

The Standard Replacement section: 9 options from JAPANESE OE, AISIN, MOTORAD and 5 other brands. AISIN THH007 is listed in this group.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Thermostat / Thermostat Housing / Water Outlet Seal parts for the 2013 Honda Insight come from 9 brands — AISIN, GATES, APEX and 6 other brands. The "Popular" part is AISIN THP505.

Part numbers include AISIN THP505, GATES 33615 and APEX AWO2056, among others listed above.

This table covers the housings and outlets the thermostat sits in. Read more

4 Thermostat Housing / Water Outlet parts are listed for the 2013 Honda Insight, from MOTORAD and FOUR SEASONS.

This group includes FOUR SEASONS 86135, MOTORAD CH1101 and MOTORAD CH2090 and the remaining parts above.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

6 Water Pump parts are listed for the 2013 Honda Insight, from BECK/ARNLEY, FVP, US MOTOR WORKS and 3 other brands. ACDELCO 252999 carries the "Popular" badge.

Economy: 3 parts, from BECK/ARNLEY, FVP and US MOTOR WORKS. A representative part number is BECK/ARNLEY 1312478.

The Standard Replacement section: 3 options from ACDELCO, GATES and GMB. ACDELCO 252999 is listed in this group.

Listed part numbers: ACDELCO 252999, BECK/ARNLEY 1312478 and FVP US8983, plus the other parts above.

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Water Pump Gasket parts for the 2013 Honda Insight come from 4 brands — AJUSA, APEX, BECK/ARNLEY and 1 other brand.

Part numbers include AJUSA 01238200, APEX AWP3272 and BECK/ARNLEY 0394186, among others listed above.