2013 Honda Insight Ignition Parts

This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

12 Camshaft Position Sensor parts are listed for the 2013 Honda Insight, from ULTRA-POWER, FAMOUS BRAND, HOLSTEIN and 9 other brands. ULTRA-POWER PC835 carries the "Popular" badge.

In the Economy grade, ULTRA-POWER, FAMOUS BRAND, HOLSTEIN and 2 other brands supply 5 parts: the catalog's value-priced group. A representative part number is ULTRA-POWER PC835.

The Standard Replacement section lists 7 options from DELPHI, STANDARD MOTOR PRODUCTS, ASTEMO / HITACHI and 4 other brands — built to original-equipment specification. DELPHI SS11944 is listed in this group.

This table covers the seals at the Camshaft Position Sensor. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE 76757.

This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

11 Crankshaft Position Sensor parts are listed for the 2013 Honda Insight, from SPECTRA PREMIUM, HOLSTEIN, PRENCO and 8 other brands. SPECTRA PREMIUM S10373 carries the "Popular" badge.

Economy: 5 parts, from SPECTRA PREMIUM, HOLSTEIN, PRENCO and 2 other brands. A representative part number is SPECTRA PREMIUM S10373.

The Standard Replacement section: 6 options from DELPHI, STANDARD MOTOR PRODUCTS, ASTEMO / HITACHI and 3 other brands. DELPHI SS11993 is listed in this group.

This table covers the seals at the Crankshaft Position Sensor. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Crankshaft Position Sensor Seal parts for the 2013 Honda Insight come from FEL-PRO.

This group includes FEL-PRO 72377 and FEL-PRO 72301.

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off. Read more

23 Ignition Coil parts are listed for the 2013 Honda Insight, from NGK, PRENCO, DELPHI and 10 other brands. ULTRA-POWER 5C1797 carries the "Popular" badge.

Economy: 3 parts, from PRENCO and ULTRA-POWER. A representative part number is ULTRA-POWER 5C1797.

The Premium section lists 3 options from DELPHI and ASTEMO / HITACHI — a step above OE specification in materials, tolerances or warranty terms. ASTEMO / HITACHI IGC0080 is listed in this group.

The Standard Replacement section: 15 options from NGK, KARLYN / BREMI / STI, WALKER PRODUCTS and 5 other brands. KARLYN / BREMI / STI 5183 is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the lock cylinders in the ignition switch. Read more

2 Ignition Lock Cylinder parts are listed for the 2013 Honda Insight, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS US1327 and WELLS 4H1865.

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine. Read more

14 Spark Plug parts for the 2013 Honda Insight come from 6 brands — NGK, CHAMPION, DENSO and 3 other brands. The "Popular" part is NGK 6619.

The Copper / Nickel section lists 1 option from CHAMPION — grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. CHAMPION 975 is listed in this group.

The Double Platinum (lasts up to 3x longer than Copper / Nickel) section lists 1 option from CHAMPION — grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. CHAMPION 7975 is listed in this group.

In the Iridium (lasts up to 4x longer than Copper / Nickel) grade, DENSO, NGK, BOSCH and 2 other brands supply 9 parts: grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is NGK 6619.

The Platinum (lasts up to 2x longer than Copper / Nickel) section lists 2 options from NGK and ACDELCO — grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. NGK 1483 is listed in this group.

The Ruthenium (maximum durability & ignitability) section lists 1 option from NGK — grouped under the catalog's "Ruthenium (maximum durability & ignitability)" designation — the notes column spells out what sets them apart. NGK 94122 is listed in this group.

This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it. Read more

3 Spark Plug / Ignition Coil Boot parts are listed for the 2013 Honda Insight, from STANDARD MOTOR PRODUCTS and NGK.

Economy: 1 part, from STANDARD MOTOR PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS 19781.

The Standard Replacement section: 2 options from NGK and STANDARD MOTOR PRODUCTS. NGK 59051 is listed in this group.

This group includes STANDARD MOTOR PRODUCTS 19781, NGK 59051 and STANDARD MOTOR PRODUCTS SPP181E.

This table covers the seals at the Spark Plug Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Spark Plug Tube Seal parts are listed for the 2013 Honda Insight, from APEX and MAHLE / CLEVITE.

Part numbers include APEX AES109 and MAHLE / CLEVITE B32529.