2015 Honda Crosstour Drivetrain Parts

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: SKF SC0889.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Axle Shaft Seal parts are listed for the 2015 Honda Crosstour, from SKF, TIMKEN and WJB / INMOTION PARTS. SKF 16541A carries the "Popular" badge. All of them fit every engine offered in the 2015 Crosstour.

This group includes SKF 16541A, SKF 13771A and TIMKEN 710629 and the remaining parts above.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

27 CV Axle parts are listed for the 2015 Honda Crosstour, from TOP NOTCH, TRAKMOTIVE, GSP and 2 other brands. APWI HO8539 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the CV Axle Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: BECK/ARNLEY 0514288.

This table covers the CV Intermediate shafts. Read more

6 CV Intermediate Shaft parts for the 2015 Honda Crosstour come from 3 brands — GSP, TOP NOTCH and TRAKMOTIVE.

Part numbers include GSP NEX36001, GSP NEX21000 and TOP NOTCH TN50100IS, among others listed above.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

6 CV Joint Boot parts are listed for the 2015 Honda Crosstour, from BECK/ARNLEY, MEVOTECH and EMPIRE. MEVOTECH DX900 carries the "Popular" badge.

Part numbers include MEVOTECH DX900, BECK/ARNLEY 1032816 and BECK/ARNLEY 1032925, among others listed above.

This table covers the bearings and races that support the differential carrier. Read more

7 Differential Carrier Bearing / Race parts are listed for the 2015 Honda Crosstour, from SKF, ULTRA-POWER, WJB / INMOTION PARTS and 3 other brands. NATIONAL 30208 carries the "Popular" badge. 1 part fits every engine; the other 6 are engine-specific.

In the Economy grade, ULTRA-POWER and WJB / INMOTION PARTS supply 2 parts: the catalog's value-priced group. A representative part number is ULTRA-POWER WT30208.

The Standard Replacement section lists 5 options from SKF, NATIONAL, BCA and 1 other brand — built to original-equipment specification. NATIONAL 30208 is listed in this group.

Listed part numbers: NATIONAL 30208 and ULTRA-POWER WT30208, plus the other parts above.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Pinion Seal parts are listed for the 2015 Honda Crosstour, from NATIONAL and TIMKEN. All of them fit every engine offered in the 2015 Crosstour.

Part numbers include NATIONAL 711177 and TIMKEN 712551.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

2 Differential Repair Sleeve parts for the 2015 Honda Crosstour come from 2 brands — NATIONAL and WJB / INMOTION PARTS. Every part fits both the 2.4L L4 and the 3.5L V6.

Part numbers include NATIONAL 99139 and WJB / INMOTION PARTS WS99139.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Differential Seal parts for the 2015 Honda Crosstour come from 3 brands — NATIONAL, TIMKEN and WJB / INMOTION PARTS. Every part fits both the 2.4L L4 and the 3.5L V6.

Listed part numbers: NATIONAL 710798 and WJB / INMOTION PARTS WS710798, plus the other parts above.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

2 Drive Shaft parts for the 2015 Honda Crosstour come from 2 brands — DORMAN and WJB / INMOTION PARTS. Every part fits both the 2.4L L4 and the 3.5L V6.

Part numbers include DORMAN 976533 and WJB / INMOTION PARTS WDS76533.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

One part is listed for the 2015 Honda Crosstour — IDEMITSU 30018100750.

This table covers the seals at the Transfer Case Companion Flange. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Companion Flange Seal parts are listed for the 2015 Honda Crosstour, from ATP and PIONEER.

Listed part numbers: ATP HO36 and PIONEER 759072.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

VALVOLINE supplies the 6 Transfer Case Fluid parts for the 2015 Honda Crosstour. VALVOLINE VV820 carries the "Popular" badge.

Part numbers include VALVOLINE VV820, VALVOLINE VV975 and VALVOLINE 889785, among others listed above.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

3 Transfer Case Input Shaft Repair Sleeve parts for the 2015 Honda Crosstour come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. Every part fits both the 2.4L L4 and the 3.5L V6.

Listed part numbers: BCA NS99147, NATIONAL 99147 and WJB / INMOTION PARTS WS99147.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Input Shaft Seal parts for the 2015 Honda Crosstour come from 3 brands — WJB / INMOTION PARTS, NATIONAL and SKF. Every part fits both the 2.4L L4 and the 3.5L V6.

This group includes NATIONAL 710721, SKF 18883A and WJB / INMOTION PARTS WS710721 and the remaining parts above.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Transfer Case Output Shaft Bearing parts for the 2015 Honda Crosstour come from NSK. Every part fits both the 2.4L L4 and the 3.5L V6.

Part numbers include NSK 16001 and NSK 16002.