2012 Honda Crosstour Drivetrain Parts

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Axle Shaft Bearing parts are listed for the 2012 Honda Crosstour, from SCHAEFFLER and SKF. All of them fit every engine offered in the 2012 Crosstour.

Part numbers include SCHAEFFLER SC0889, among others listed above.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Axle Shaft Seal parts for the 2012 Honda Crosstour come from 3 brands — SKF, TIMKEN and WJB / INMOTION PARTS. The "Popular" part is SKF 16541A. Every part fits both the 2.4L L4 and the 3.5L V6.

This group includes SKF 16541A, SKF 13771A and TIMKEN 710629 and the remaining parts above.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

28 CV Axle parts for the 2012 Honda Crosstour come from 5 brands — TOP NOTCH, GSP, APWI and 2 other brands. The "Popular" part is APWI HO8539. A list this long means CV Axle applications vary by configuration — the notes carry the qualifiers.

This table covers the CV Axle Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2012 Honda Crosstour — BECK/ARNLEY 0514288.

This table covers the CV Intermediate shafts. Read more

3 CV Intermediate Shaft parts are listed for the 2012 Honda Crosstour, from GSP, TOP NOTCH and TRAKMOTIVE.

Part numbers include GSP NEX36001, TOP NOTCH TN50100IS and TRAKMOTIVE HO3564.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

5 CV Joint Boot parts for the 2012 Honda Crosstour come from 3 brands — BECK/ARNLEY, GKN and MEVOTECH. The "Popular" part is BECK/ARNLEY 1032314. 1 part fits every engine; the other 4 are engine-specific.

Listed part numbers: BECK/ARNLEY 1032314, BECK/ARNLEY 1032927 and GKN 305744, plus the other parts above.

This table covers the bearings and races that support the differential carrier. Read more

7 Differential Carrier Bearing / Race parts for the 2012 Honda Crosstour come from 6 brands — SKF, WJB / INMOTION PARTS, ULTRA-POWER and 3 other brands. The "Popular" part is WJB / INMOTION PARTS WT30208. 4 parts fit every engine; the other 3 are engine-specific.

The Economy section lists 2 options from WJB / INMOTION PARTS and ULTRA-POWER — the catalog's value-priced group. WJB / INMOTION PARTS WT30208 is listed in this group.

In the Standard Replacement grade, SKF, NATIONAL, BCA and 1 other brand supply 5 parts: built to original-equipment specification. A representative part number is NATIONAL 30208.

This group includes WJB / INMOTION PARTS WT30208 and NATIONAL 30208 and the remaining parts above.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Pinion Seal parts for the 2012 Honda Crosstour come from 2 brands — NATIONAL and TIMKEN. Every part fits both the 2.4L L4 and the 3.5L V6.

Listed part numbers: NATIONAL 711177 and TIMKEN 712551.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

2 Differential Repair Sleeve parts are listed for the 2012 Honda Crosstour, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2012 Crosstour.

Listed part numbers: NATIONAL 99139 and WJB / INMOTION PARTS WS99139.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Seal parts are listed for the 2012 Honda Crosstour, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2012 Crosstour.

Part numbers include NATIONAL 711087 and WJB / INMOTION PARTS WS711087.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

2 Drive Shaft parts are listed for the 2012 Honda Crosstour, from DORMAN and WJB / INMOTION PARTS. All of them fit every engine offered in the 2012 Crosstour.

Listed part numbers: DORMAN 976533 and WJB / INMOTION PARTS WDS76533.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

This group shows a single part: IDEMITSU 30018100750.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

6 Transfer Case Fluid parts for the 2012 Honda Crosstour come from VALVOLINE. The "Popular" part is VALVOLINE VV820.

Part numbers include VALVOLINE VV820, VALVOLINE VV975 and VALVOLINE 889785, among others listed above.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

4 Transfer Case Input Shaft Repair Sleeve parts are listed for the 2012 Honda Crosstour, from BCA, NATIONAL, SCHAEFFLER and 1 other brand. All of them fit every engine offered in the 2012 Crosstour.

Listed part numbers: BCA NS99147, NATIONAL 99147 and SCHAEFFLER SR3476, plus the other parts above.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Input Shaft Seal parts are listed for the 2012 Honda Crosstour, from WJB / INMOTION PARTS, NATIONAL and SKF. All of them fit every engine offered in the 2012 Crosstour.

Listed part numbers: NATIONAL 710721, SKF 18883A and WJB / INMOTION PARTS WS710721, plus the other parts above.