2017 Honda Accord Ignition Parts

This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

35 Camshaft Position Sensor parts are listed for the 2017 Honda Accord, from DELPHI, STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and 9 other brands. ULTRA-POWER PC1084 carries the "Popular" badge. Grades run from Economy through Standard Replacement; Standard Replacement is the most populated section, led by STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, WELLS and 5 other brands.

This table covers the seals at the Camshaft Position Sensor. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE 76757.

This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

29 Crankshaft Position Sensor parts are listed for the 2017 Honda Accord, from STANDARD MOTOR PRODUCTS, DELPHI, WALKER PRODUCTS and 11 other brands. STANDARD MOTOR PRODUCTS PC813T carries the "Popular" badge. Economy and Standard Replacement are all represented, and Standard Replacement alone accounts for 17 parts.

This table covers the seals at the Crankshaft Position Sensor. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Crankshaft Position Sensor Seal parts for the 2017 Honda Accord come from FEL-PRO. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: FEL-PRO 72377 and FEL-PRO 72301.

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off. Read more

38 Ignition Coil parts are listed for the 2017 Honda Accord, from SPECTRA PREMIUM, DELPHI, DENSO and 13 other brands. ULTRA-POWER UF713 carries the "Popular" badge. Grades run from Economy through Standard Replacement; Standard Replacement is the most populated section, led by DENSO, STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and 4 other brands.

This table covers the lock cylinders in the ignition switch. Read more

One part is listed for the 2017 Honda Accord — WELLS 4H1820.

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine. Read more

20 Spark Plug parts for the 2017 Honda Accord come from 5 brands — NGK, DENSO, BOSCH and 2 other brands. The "Popular" part is NGK 93501. 1 part fits every engine; the other 19 are engine-specific.

The Copper / Nickel section lists 1 option from DENSO — grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. DENSO 3445 is listed in this group.

In the Iridium (lasts up to 4x longer than Copper / Nickel) grade, NGK, BOSCH, DENSO and 2 other brands supply 15 parts: grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is NGK 93501.

The Platinum (lasts up to 2x longer than Copper / Nickel) section lists 2 options from NGK — grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. NGK 92649 is listed in this group.

The Ruthenium (maximum durability & ignitability) section lists 2 options from NGK — grouped under the catalog's "Ruthenium (maximum durability & ignitability)" designation — the notes column spells out what sets them apart. NGK 92274 is listed in this group.

This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2017 Honda Accord.

In the Economy grade, STANDARD MOTOR PRODUCTS supplies 1 part: the catalog's value-priced group. A representative part number is STANDARD MOTOR PRODUCTS 19881.

The Standard Replacement section lists 1 option from STANDARD MOTOR PRODUCTS — built to original-equipment specification. STANDARD MOTOR PRODUCTS SPP196E is listed in this group.

This group includes STANDARD MOTOR PRODUCTS 19881 and STANDARD MOTOR PRODUCTS SPP196E.

This table covers the seals at the Spark Plug Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Spark Plug Tube Seal parts are listed for the 2017 Honda Accord, from MAHLE / CLEVITE and FEL-PRO.

This group includes FEL-PRO ES73103, MAHLE / CLEVITE GS33914 and MAHLE / CLEVITE GS33907.