2017 Honda Accord Engine Parts

This table covers the chains that drive the balance shafts. Read more

5 Balance Shaft Chain parts are listed for the 2017 Honda Accord, from S.A. GEAR and INA.

Part numbers include INA ZC1021320, S.A. GEAR C1180 and S.A. GEAR 76413P, among others listed above.

This table covers the guides that keep the balance-shaft chain on its path. Read more

One part is listed for the 2017 Honda Accord — S.A. GEAR 71262.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

3 Balance Shaft Chain Tensioner parts for the 2017 Honda Accord come from 2 brands — S.A. GEAR and CLOYES.

Listed part numbers: CLOYES 95989, S.A. GEAR 91347 and S.A. GEAR 91291.

This table covers the Balance Shaft sprockets. Read more

3 Balance Shaft Sprocket parts are listed for the 2017 Honda Accord, from S.A. GEAR and CLOYES.

Part numbers include CLOYES S1116, S.A. GEAR S1474 and S.A. GEAR S1431.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts for the 2017 Honda Accord come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS99147, NATIONAL 99147 and WJB / INMOTION PARTS WS99147.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

10 Camshaft Seal parts for the 2017 Honda Accord come from 9 brands — VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 6 other brands. The "Popular" part is FEL-PRO TCS46025.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Connecting Rod Bearing parts are listed for the 2017 Honda Accord, from TOPLINE, KING ENGINE BEARINGS, MAHLE / CLEVITE and 2 other brands. ITM ENGINE COMPONENTS 6B1503 carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 1 part: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR6837XP.

The Standard Replacement section lists 4 options from ITM ENGINE COMPONENTS, KING ENGINE BEARINGS, MAHLE / CLEVITE and 1 other brand — built to original-equipment specification. ITM ENGINE COMPONENTS 6B1503 is listed in this group.

4 ungrouped parts are not assigned to a grade, with the same engine-level match.

Part numbers include ITM ENGINE COMPONENTS 6B1503, KING ENGINE BEARINGS CR6837XP and KING ENGINE BEARINGS CR6837SM, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Conversion / Lower Gasket Set parts are listed for the 2017 Honda Accord, from AJUSA, APEX, FEL-PRO and 4 other brands. APEX ACS1050 carries the "Popular" badge.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Crankshaft Main Bearing parts for the 2017 Honda Accord come from 3 brands — TOPLINE, ENGINETECH and KING ENGINE BEARINGS.

Part numbers include ENGINETECH BC1000, KING ENGINE BEARINGS MB4508SI and TOPLINE TWH36, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts for the 2017 Honda Accord come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.

This group includes BCA NS99315, NATIONAL 99315 and WJB / INMOTION PARTS WS99315 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

45 Crankshaft Seal parts for the 2017 Honda Accord come from 14 brands — ELRING, VICTOR REINZ, AJUSA and 11 other brands. The "Popular" part is FEL-PRO TCS46051. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

12 Cylinder Head Bolt parts are listed for the 2017 Honda Accord, from FEL-PRO, MAHLE / CLEVITE, AJUSA and 4 other brands. ENGINETECH HB261 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

23 Cylinder Head Gasket parts are listed for the 2017 Honda Accord, from APEX, AJUSA, ELRING and 4 other brands. APEX AHG174 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

14 Cylinder Head Gasket Set parts are listed for the 2017 Honda Accord, from APEX, AJUSA, ELRING and 6 other brands. APEX AHS1074 carries the "Popular" badge.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2017 Honda Accord come from KAT'S HEATERS.

Listed part numbers: KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

6 Engine Cover parts are listed for the 2017 Honda Accord, from TECHPRO and VARIOUS MFR. 3 parts fit every engine; the other 3 are engine-specific.

Part numbers include TECHPRO HO1228140, TECHPRO HO1228141 and TECHPRO HO1228158, among others listed above.

This table covers the Engine Cover grommets. Read more

This group shows a single part: DORMAN 49932.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Engine Kit Gasket Set parts are listed for the 2017 Honda Accord, from AJUSA and TOPLINE.

Listed part numbers: AJUSA 50441900, AJUSA 50477700 and AJUSA 50581800, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

9 Exhaust Valve parts for the 2017 Honda Accord come from 7 brands — MELLING, TOPLINE, ITM ENGINE COMPONENTS and 4 other brands. The "Popular" part is ITM ENGINE COMPONENTS RX9599.

Part numbers include ITM ENGINE COMPONENTS RX9599, MELLING V0779 and ENGINETECH EM1017, among others listed above.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

2 Fuel Pump Camshaft Follower parts are listed for the 2017 Honda Accord, from STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS GDF101 and WELLS 5T5001.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts are listed for the 2017 Honda Accord, from ATP, DAYCO and DORMAN.

Listed part numbers: ATP 102488, ATP 102367 and DAYCO PB1713N, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

18 Intake Manifold Gasket parts are listed for the 2017 Honda Accord, from APEX, FEL-PRO, MAHLE / CLEVITE and 4 other brands. APEX AMS1691 carries the "Popular" badge.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Plenum Gasket parts for the 2017 Honda Accord come from 5 brands — VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO MS964093.

This group includes FEL-PRO MS964093, MAHLE / CLEVITE MS19700 and APEX AMS1690 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

8 Intake Valve parts for the 2017 Honda Accord come from 6 brands — ENGINETECH, TOPLINE, MELLING and 3 other brands. The "Popular" part is MELLING V0336.

Listed part numbers: MELLING V0336, SBI 13336 and ENGINETECH IM1018, plus the other parts above.