The 1936 Hudson Custom Eight has 14 ignition parts with verified fitment on this page — 5 part types and 8 brands, covering both the 3.5L 212cid L6 and the 4.2L 254cid L8. Each part includes a manufacturer part number and application notes.
The ignition system on the 1936 Hudson Custom Eight delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. The largest groups are Ignition Coil (6 parts), Spark Plug (4 parts) and Distributor Cap (2 parts). The other 2 part types cover the remaining 2 parts.
The 1936 Hudson Custom Eight was sold with both the 3.5L 212cid L6 and the 4.2L 254cid L8. 10 parts fit every engine; the other 4 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 1936 Hudson Custom Eight ignition parts are STANDARD MOTOR PRODUCTS (5 parts), CHAMPION (3 parts) and LILAND GLOBAL (1 part), plus 5 more brands. Quality grades include Economy, Standard Replacement and Premium.
2 parts on this 1936 Hudson Custom Eight page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including STANDARD MOTOR PRODUCTS UC14T (Ignition Coil) and STANDARD MOTOR PRODUCTS UC14 (Ignition Coil). Click any part number to see every vehicle that part fits.
Condenser / Capacitor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 4.2L 254cid L8 | AL111T | 🇺🇸 US | T-Series | View on Amazon |
This table covers the capacitors used in this electrical or A/C circuit.
One part is listed for the 1936 Hudson Custom Eight — STANDARD MOTOR PRODUCTS AL111T.
Distributor Cap
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LILAND GLOBAL Fits: 3.5L 212cid L6 | AL92LG | 🇺🇸 US | Black Brass | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 3.5L 212cid L6 | AL92 | 🇺🇸 US | View on Amazon |
This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.
2 Distributor Cap parts for the 1936 Hudson Custom Eight come from 2 brands — LILAND GLOBAL and STANDARD MOTOR PRODUCTS.
In the Premium grade, LILAND GLOBAL supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is LILAND GLOBAL AL92LG.
In the Standard Replacement grade, STANDARD MOTOR PRODUCTS supplies 1 part: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS AL92.
Listed part numbers: LILAND GLOBAL AL92LG and STANDARD MOTOR PRODUCTS AL92.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: all 1936 Custom Eight engines | UC14T | 🇺🇸 US | T-Series6 Volt | View on Amazon |
| FVP Fits: all 1936 Custom Eight engines | UC14F | 🇺🇸 US | View on Amazon | |
| HOLSTEIN Fits: all 1936 Custom Eight engines | 2IGC0057 | 🇺🇸 US | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: all 1936 Custom Eight engines | UC14 | 🇺🇸 US | Blue Streak6 Volt | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| UNITED MOTOR PRODUCTS Fits: all 1936 Custom Eight engines | C14 | 🇺🇸 US | View on Amazon | |
| WELLS Fits: all 1936 Custom Eight engines | 5C1063 | 🇺🇸 US | Fits most cars, trucks, tractors & industrial engs6 Volt (Universal Coil) used with external resistor or where resistance wire is an internal part of wiring harness. | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
6 Ignition Coil parts are listed for the 1936 Hudson Custom Eight, from STANDARD MOTOR PRODUCTS, FVP, HOLSTEIN and 2 other brands. STANDARD MOTOR PRODUCTS UC14T carries the "Popular" badge. All of them fit every engine offered in the 1936 Custom Eight.
In the Economy grade, STANDARD MOTOR PRODUCTS, FVP and HOLSTEIN supply 3 parts: the catalog's value-priced group. A representative part number is STANDARD MOTOR PRODUCTS UC14T.
The Premium section: 1 option from STANDARD MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS UC14 is listed in this group.
The Standard Replacement section: 2 options from UNITED MOTOR PRODUCTS and WELLS. UNITED MOTOR PRODUCTS C14 is listed in this group.
This group includes STANDARD MOTOR PRODUCTS UC14T, FVP UC14F and HOLSTEIN 2IGC0057 and the remaining parts above.
Ignition Coil Mounting Bracket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 4.2L 254cid L8 | CB6 | 🇺🇸 US | View on Amazon |
This table covers the brackets that mount the Ignition Coil Mounting. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners.
This group shows a single part: STANDARD MOTOR PRODUCTS CB6.
Spark Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: all 1936 Custom Eight engines | R45 | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| CHAMPION Fits: all 1936 Custom Eight engines | 841 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.03" | View on Amazon |
| CHAMPION Fits: all 1936 Custom Eight engines | 8411 | 🇺🇸 US | Copper Plus | View on Amazon |
| CHAMPION Fits: all 1936 Custom Eight engines | 871 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.03" | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
4 Spark Plug parts for the 1936 Hudson Custom Eight come from 2 brands — CHAMPION and ACDELCO. Every part fits both the 3.5L 212cid L6 and the 4.2L 254cid L8.
Part numbers include ACDELCO R45, CHAMPION 841 and CHAMPION 8411, among others listed above.
Buying Ignition Parts for a 1936 Hudson Custom Eight
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Some ignition parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Ignition Coil and Spark Plug .
Frequently Asked Questions
How many ignition parts fit the 1936 Hudson Custom Eight?
Our catalog currently lists 14 ignition parts for the 1936 Hudson Custom Eight across 5 subcategories and 8 brands, covering both the 3.5L 212cid L6 and the 4.2L 254cid L8. Each part is matched to the engine(s) it fits.
Do ignition parts differ between 1936 Hudson Custom Eight engines?
Some do. 10 parts fit every engine; the other 4 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 1936 Hudson Custom Eight?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1936 Hudson Custom Eight?
Notes on this page include pre-set gaps of 0.022", 0.03" and 0.040". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1936 Hudson Custom Eight was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1936 Hudson Custom Eight?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1936 Hudson Custom Eight
Ignition Parts for Other Hudson Custom Eight Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.