1937 Hudson Custom Eight Ignition Parts

Engine:
4.2L 254cid L8

The 1937 Hudson Custom Eight has 17 ignition parts with verified fitment on this page — 5 part types and 8 brands, covering the 4.2L 254cid L8 engine. Each part includes a manufacturer part number and application notes.

On the 1937 Hudson Custom Eight, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. 15 parts of the 17 listed are Spark Plug (7 parts), Ignition Coil (6 parts) and Distributor Rotor (2 parts). The other 2 part types cover the remaining 2 parts.

Condenser / Capacitor

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS AL111T
🇺🇸 US
T-Series
View on
Amazon

This table covers the capacitors used in this electrical or A/C circuit.

Distributor Rotor

Brand Part Number Markets Notes Buy
LILAND GLOBAL AL64LG
🇺🇸 US
Length: 1/4 In
Fitment notes — LILAND GLOBAL AL64LG
Length: 1/4 In
Custom Eight Series 77PremiumBlack Brass
View on
Amazon
STANDARD MOTOR PRODUCTS AL64
🇺🇸 US
Custom Eight Series 77
View on
Amazon

This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular UC14T
🇺🇸 US
T-Series6 Volt
View on
Amazon
FVP UC14F
🇺🇸 US
View on
Amazon
HOLSTEIN 2IGC0057
🇺🇸 US
View on
Amazon

Premium

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular UC14
🇺🇸 US
Blue Streak6 Volt
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
UNITED MOTOR PRODUCTS C14
🇺🇸 US
View on
Amazon
WELLS 5C1063
🇺🇸 US
Fits most cars, trucks, tractors & industrial engs6 Volt (Universal Coil) used with external resistor or where resistance wire is an internal part of wiring harness.
Fitment notes — WELLS 5C1063
Fits:
most cars, trucks, tractors & industrial engs6 Volt (Universal Coil) used with external resistor or where resistance wire is an internal part of wiring harness.
6 VOLT
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Ignition Coil Mounting Bracket

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS CB6
🇺🇸 US
View on
Amazon

This table covers the brackets that mount the Ignition Coil Mounting. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners.

Spark Plug

Summary: Notes include pre-set gaps of 0.022", 0.03" and 0.040". Replacement brands in this table include CHAMPION and ACDELCO.

Brand Part Number Markets Notes Buy
ACDELCO Popular R45
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R45
ProfessionalConventionalPre-Set Gap: 0.040"
Custom Eight Series 75Original Equipment-Recommended Gap: .025
View on
Amazon
CHAMPION Popular 841
🇺🇸 US
Copper PlusPre-Set Gap: 0.03"
Fitment notes — CHAMPION 841
Copper PlusPre-Set Gap: 0.03"
Non-Resistor Typewith Stock Cast Iron HeadOE-Recommended Gap: 0.022"
View on
Amazon
CHAMPION 854
🇺🇸 US
Copper PlusPre-Set Gap: 0.03"
Fitment notes — CHAMPION 854
Copper PlusPre-Set Gap: 0.03"
Resistor Typewith High Compression HeadOE-Recommended Gap: 0.022"
View on
Amazon
CHAMPION 8411
🇺🇸 US
Copper Plus
Fitment notes — CHAMPION 8411
Copper Plus
Non-Resistor Typewith Stock Cast Iron HeadOE-Recommended Gap: 0.022"
View on
Amazon
CHAMPION 8441
🇺🇸 US
Copper Plus
Fitment notes — CHAMPION 8441
Copper Plus
Non-Resistor Typewith High Compression HeadOE-Recommended Gap: 0.022"
View on
Amazon
CHAMPION 844
🇺🇸 US
Copper PlusPre-Set Gap: 0.03"
Fitment notes — CHAMPION 844
Copper PlusPre-Set Gap: 0.03"
Non-Resistor Typewith High Compression HeadOE-Recommended Gap: 0.022"
View on
Amazon
CHAMPION 871
🇺🇸 US
Copper PlusPre-Set Gap: 0.03"
Fitment notes — CHAMPION 871
Copper PlusPre-Set Gap: 0.03"
Resistor Typewith Stock Cast Iron HeadOE-Recommended Gap: 0.022"
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1937 Hudson Custom Eight

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 4.2L 254cid L8 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug and Ignition Coil .

Frequently Asked Questions

How many ignition parts fit the 1937 Hudson Custom Eight?

Our catalog currently lists 17 ignition parts for the 1937 Hudson Custom Eight across 5 subcategories and 8 brands, covering the 4.2L 254cid L8 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1937 Hudson Custom Eight?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1937 Hudson Custom Eight?

Notes on this page include pre-set gaps of 0.022", 0.03" and 0.040". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1937 Hudson Custom Eight was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1937 Hudson Custom Eight?

Every part on this page is matched to the 4.2L 254cid L8 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1937 Hudson Custom Eight

Ignition Parts for Other Hudson Custom Eight Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.