15 Ignition parts are listed for the 1942 Hudson Commodore Series, in 5 part types, covering both the 3.5L 212cid L6 and the 4.2L 254cid L8. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1942 Hudson Commodore Series, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Most of the listed parts are Ignition Coil (6 parts), Spark Plug (4 parts) and Condenser / Capacitor (2 parts). The other 2 part types cover the remaining 3 parts.
The 1942 Hudson Commodore Series was sold with both the 3.5L 212cid L6 and the 4.2L 254cid L8. 10 parts fit every engine; the other 5 are engine-specific. Each part shows which engine(s) it fits.
7 brands supply ignition parts for the 1942 Hudson Commodore Series, led by STANDARD MOTOR PRODUCTS (4 parts), WELLS (4 parts) and CHAMPION (3 parts), plus 4 more brands. Quality grades include Economy, Standard Replacement and Premium.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1942 Hudson Commodore Series. 2 parts have it, including STANDARD MOTOR PRODUCTS UC14T (Ignition Coil) and STANDARD MOTOR PRODUCTS UC14 (Ignition Coil). Each part number opens a page with every vehicle that part fits.
Condenser / Capacitor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 4.2L 254cid L8 | AL111T | 🇺🇸 US | T-Series | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: 4.2L 254cid L8 | 5H1018 | 🇺🇸 US | Heavy Duty | View on Amazon |
This table covers the capacitors used in this electrical or A/C circuit.
2 Condenser / Capacitor parts for the 1942 Hudson Commodore Series come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.
The Economy section lists 1 option from STANDARD MOTOR PRODUCTS — the catalog's value-priced group. STANDARD MOTOR PRODUCTS AL111T is listed in this group.
In the Standard Replacement grade, WELLS supplies 1 part: built to original-equipment specification. A representative part number is WELLS 5H1018.
This group includes STANDARD MOTOR PRODUCTS AL111T and WELLS 5H1018.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: all 1942 Commodore Series engines | UC14T | 🇺🇸 US | T-Series6 Volt | View on Amazon |
| FVP Fits: all 1942 Commodore Series engines | UC14F | 🇺🇸 US | Fits Commodore Series 24 | View on Amazon |
| HOLSTEIN Fits: all 1942 Commodore Series engines | 2IGC0057 | 🇺🇸 US | Commodore Series 24 | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: all 1942 Commodore Series engines | UC14 | 🇺🇸 US | Blue Streak6 Volt | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| UNITED MOTOR PRODUCTS Fits: all 1942 Commodore Series engines | C14 | 🇺🇸 US | Commodore Series 24 | View on Amazon |
| WELLS Fits: all 1942 Commodore Series engines | 5C1063 | 🇺🇸 US | Fits most cars, trucks, tractors & industrial engs6 Volt (Universal Coil) used with external resistor or where resistance wire is an internal part of wiring harness. | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
6 Ignition Coil parts for the 1942 Hudson Commodore Series come from 5 brands — STANDARD MOTOR PRODUCTS, FVP, HOLSTEIN and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS UC14T. Every part fits both the 3.5L 212cid L6 and the 4.2L 254cid L8.
The Economy section: 3 options from STANDARD MOTOR PRODUCTS, FVP and HOLSTEIN. STANDARD MOTOR PRODUCTS UC14T is listed in this group.
In the Premium grade, STANDARD MOTOR PRODUCTS supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is STANDARD MOTOR PRODUCTS UC14.
Standard Replacement: 2 parts, from UNITED MOTOR PRODUCTS and WELLS. A representative part number is UNITED MOTOR PRODUCTS C14.
Part numbers include STANDARD MOTOR PRODUCTS UC14T, FVP UC14F and HOLSTEIN 2IGC0057, among others listed above.
Ignition Coil Mounting Bracket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 4.2L 254cid L8 | CB6 | 🇺🇸 US | View on Amazon |
This table covers the brackets that mount the Ignition Coil Mounting. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners.
One part is listed for the 1942 Hudson Commodore Series — STANDARD MOTOR PRODUCTS CB6.
Ignition Conversion Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: 3.5L 212cid L6 | 1A4209 | 🇺🇸 US | Commodore Series 22with Autolite Distributor IGW | View on Amazon |
| WELLS Fits: 3.5L 212cid L6 | 1A4208 | 🇺🇸 US | Commodore Series 22with Autolite Distributor IGW | View on Amazon |
This table covers the Ignition Conversion kits.
WELLS supplies both parts for the 1942 Hudson Commodore Series.
Part numbers include WELLS 1A4209 and WELLS 1A4208.
Spark Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: all 1942 Commodore Series engines | R45 | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| CHAMPION Fits: all 1942 Commodore Series engines | 841 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.03" | View on Amazon |
| CHAMPION Fits: all 1942 Commodore Series engines | 8411 | 🇺🇸 US | Copper Plus | View on Amazon |
| CHAMPION Fits: all 1942 Commodore Series engines | 871 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.03" | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
4 Spark Plug parts are listed for the 1942 Hudson Commodore Series, from CHAMPION and ACDELCO. All of them fit every engine offered in the 1942 Commodore Series.
Listed part numbers: ACDELCO R45, CHAMPION 841 and CHAMPION 8411, plus the other parts above.
Buying Ignition Parts for a 1942 Hudson Commodore Series
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Some ignition parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Ignition Coil and Spark Plug .
Frequently Asked Questions
How many ignition parts fit the 1942 Hudson Commodore Series?
Our catalog currently lists 15 ignition parts for the 1942 Hudson Commodore Series across 5 subcategories and 7 brands, covering both the 3.5L 212cid L6 and the 4.2L 254cid L8. Each part is matched to the engine(s) it fits.
Do ignition parts differ between 1942 Hudson Commodore Series engines?
Some do. 10 parts fit every engine; the other 5 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 1942 Hudson Commodore Series?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1942 Hudson Commodore Series?
Notes on this page include pre-set gaps of 0.03", 0.032" and 0.040". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1942 Hudson Commodore Series was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1942 Hudson Commodore Series?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1942 Hudson Commodore Series
Ignition Parts for Other Hudson Commodore Series Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.