This page lists 37 ignition parts for the 1949 Hudson Commodore Series, across 8 part types, covering both the 4.2L 254cid L8 and the 4.3L 262cid L6. Every part shows its brand, manufacturer part number and fitment notes.
The ignition system on the 1949 Hudson Commodore Series delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. The largest groups are Distributor Rotor (9 parts), Spark Plug (9 parts) and Ignition Coil (6 parts). The other 5 part types cover the remaining 13 parts.
The 1949 Hudson Commodore Series was sold with both the 4.2L 254cid L8 and the 4.3L 262cid L6. 20 parts fit every engine; the other 17 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 1949 Hudson Commodore Series ignition parts are STANDARD MOTOR PRODUCTS (9 parts), LILAND GLOBAL (8 parts) and CHAMPION (6 parts), plus 6 more brands. Quality grades include Standard Replacement, Economy and Premium.
7 parts on this 1949 Hudson Commodore Series page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including UNITED MOTOR PRODUCTS CR605 (Distributor Rotor) and STANDARD MOTOR PRODUCTS UC14T (Ignition Coil). Click any part number to see every vehicle that part fits.
Condenser / Capacitor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: all 1949 Commodore Series engines | AL118T | 🇺🇸 US | T-SeriesTerminal Type: Slide | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: all 1949 Commodore Series engines | 5H1018 | 🇺🇸 US | Heavy Duty | View on Amazon |
This table covers the capacitors used in this electrical or A/C circuit.
2 Condenser / Capacitor parts are listed for the 1949 Hudson Commodore Series, from STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 1949 Commodore Series.
In the Economy grade, STANDARD MOTOR PRODUCTS supplies 1 part: the catalog's value-priced group. A representative part number is STANDARD MOTOR PRODUCTS AL118T.
The Standard Replacement section lists 1 option from WELLS — built to original-equipment specification. WELLS 5H1018 is listed in this group.
Part numbers include STANDARD MOTOR PRODUCTS AL118T and WELLS 5H1018.
Distributor Cap
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LILAND GLOBAL Fits: 4.2L 254cid L8 | AL493LG | 🇺🇸 US | Black Brass | View on Amazon |
| LILAND GLOBAL Fits: 4.3L 262cid L6 | AL132LG | 🇺🇸 US | Body Material: PhenolicBlack Brass | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LILAND GLOBAL Fits: 4.3L 262cid L6 | AL132BALG | 🇺🇸 US | Black AluminumBody Material: Phenolic | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 4.2L 254cid L8 | AL493 | 🇺🇸 US | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: 4.3L 262cid L6 | AL132 | 🇺🇸 US | View on Amazon |
This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.
5 Distributor Cap parts for the 1949 Hudson Commodore Series come from 2 brands — LILAND GLOBAL and STANDARD MOTOR PRODUCTS.
In the Premium grade, LILAND GLOBAL supplies 2 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is LILAND GLOBAL AL493LG.
Standard Replacement: 3 parts, from STANDARD MOTOR PRODUCTS and LILAND GLOBAL. A representative part number is LILAND GLOBAL AL132BALG.
This group includes LILAND GLOBAL AL493LG, LILAND GLOBAL AL132LG and LILAND GLOBAL AL132BALG and the remaining parts above.
Distributor Rotor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| UNITED MOTOR PRODUCTS Popular Fits: 4.3L 262cid L6 | CR605 | 🇺🇸 US | View on Amazon | |
| UNITED MOTOR PRODUCTS Fits: 4.2L 254cid L8 | IR810 | 🇺🇸 US | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: 4.2L 254cid L8 | AL99 | 🇺🇸 US | Mounting Hardware Included: No | View on Amazon |
| STANDARD MOTOR PRODUCTS Popular Fits: 4.3L 262cid L6 | AL98 | 🇺🇸 US | View on Amazon | |
| LILAND GLOBAL Fits: all 1949 Commodore Series engines | AL99TBLG | 🇺🇸 US | Tan BrassPremium | View on Amazon |
| LILAND GLOBAL Fits: all 1949 Commodore Series engines | AL99LG | 🇺🇸 US | Height: 1.0 In | View on Amazon |
| LILAND GLOBAL Fits: all 1949 Commodore Series engines | AL85RBLG | 🇺🇸 US | Red BrassPremium | View on Amazon |
| LILAND GLOBAL Fits: 4.3L 262cid L6 | AL98LG | 🇺🇸 US | Height: 1.0 In | View on Amazon |
| LILAND GLOBAL Fits: 4.3L 262cid L6 | AL98RBLG | 🇺🇸 US | Red BrassPremium | View on Amazon |
This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.
9 Distributor Rotor parts for the 1949 Hudson Commodore Series come from 3 brands — LILAND GLOBAL, UNITED MOTOR PRODUCTS and STANDARD MOTOR PRODUCTS. The "Popular" part is UNITED MOTOR PRODUCTS CR605. 3 parts fit every engine; the other 6 are engine-specific.
The Economy section: 2 options from UNITED MOTOR PRODUCTS. UNITED MOTOR PRODUCTS CR605 is listed in this group.
Standard Replacement: 7 parts, from LILAND GLOBAL and STANDARD MOTOR PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS AL99.
This group includes UNITED MOTOR PRODUCTS CR605, UNITED MOTOR PRODUCTS IR810 and STANDARD MOTOR PRODUCTS AL99 and the remaining parts above.
Ignition Breaker Points
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 4.3L 262cid L6 | AL4556PT | 🇺🇸 US | T-Series | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| UNITED MOTOR PRODUCTS Fits: 4.3L 262cid L6 | CP006 | 🇺🇸 US | View on Amazon |
This table covers the breaker points in a points-type distributor.
2 Ignition Breaker Points parts are listed for the 1949 Hudson Commodore Series, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.
Economy: 1 part, from STANDARD MOTOR PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS AL4556PT.
The Standard Replacement section: 1 option from UNITED MOTOR PRODUCTS. UNITED MOTOR PRODUCTS CP006 is listed in this group.
Part numbers include STANDARD MOTOR PRODUCTS AL4556PT and UNITED MOTOR PRODUCTS CP006.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: all 1949 Commodore Series engines | UC14T | 🇺🇸 US | T-Series6 Volt | View on Amazon |
| FVP Fits: all 1949 Commodore Series engines | UC14F | 🇺🇸 US | View on Amazon | |
| HOLSTEIN Fits: all 1949 Commodore Series engines | 2IGC0057 | 🇺🇸 US | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: all 1949 Commodore Series engines | UC14 | 🇺🇸 US | Blue Streak6 Volt | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| UNITED MOTOR PRODUCTS Fits: all 1949 Commodore Series engines | C14 | 🇺🇸 US | View on Amazon | |
| WELLS Fits: all 1949 Commodore Series engines | 5C1063 | 🇺🇸 US | Fits most cars, trucks, tractors & industrial engs6 Volt (Universal Coil) used with external resistor or where resistance wire is an internal part of wiring harness. | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
6 Ignition Coil parts are listed for the 1949 Hudson Commodore Series, from STANDARD MOTOR PRODUCTS, FVP, HOLSTEIN and 2 other brands. STANDARD MOTOR PRODUCTS UC14T carries the "Popular" badge. All of them fit every engine offered in the 1949 Commodore Series.
Economy: 3 parts, from STANDARD MOTOR PRODUCTS, FVP and HOLSTEIN. A representative part number is STANDARD MOTOR PRODUCTS UC14T.
The Premium section: 1 option from STANDARD MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS UC14 is listed in this group.
The Standard Replacement section: 2 options from UNITED MOTOR PRODUCTS and WELLS. UNITED MOTOR PRODUCTS C14 is listed in this group.
This group includes STANDARD MOTOR PRODUCTS UC14T, FVP UC14F and HOLSTEIN 2IGC0057 and the remaining parts above.
Ignition Coil Mounting Bracket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 4.2L 254cid L8 | CB6 | 🇺🇸 US | View on Amazon |
This table covers the brackets that mount the Ignition Coil Mounting. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners.
This group shows a single part: STANDARD MOTOR PRODUCTS CB6.
Ignition Conversion Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: 4.2L 254cid L8 | 1A4213 | 🇺🇸 US | with Autolite Distributor # IGT-42046 Volt | View on Amazon |
| WELLS Fits: 4.3L 262cid L6 | 1A4219 | 🇺🇸 US | Autolite IGS Distributor, Lobe Sensor Module6 Volt | View on Amazon |
| WELLS Fits: 4.3L 262cid L6 | 1A4218 | 🇺🇸 US | Autolite IGS Distributor, Lobe Sensor Module6 Volt | View on Amazon |
This table covers the Ignition Conversion kits.
3 Ignition Conversion Kit parts for the 1949 Hudson Commodore Series come from WELLS.
Listed part numbers: WELLS 1A4213, WELLS 1A4219 and WELLS 1A4218.
Spark Plug
Summary: Notes include pre-set gaps of 0.030" and 0.032". Both engines share the same gaps. Replacement brands in this table include CHAMPION, MOTORCRAFT and ACDELCO.
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMPION Popular Fits: all 1949 Commodore Series engines | 841 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.03" | View on Amazon |
| CHAMPION Popular Fits: all 1949 Commodore Series engines | 844 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.03" | View on Amazon |
| ACDELCO Fits: all 1949 Commodore Series engines | C45L | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| CHAMPION Fits: all 1949 Commodore Series engines | 854 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.03" | View on Amazon |
| CHAMPION Fits: all 1949 Commodore Series engines | 8411 | 🇺🇸 US | Copper Plus | View on Amazon |
| CHAMPION Fits: all 1949 Commodore Series engines | 8441 | 🇺🇸 US | Copper Plus | View on Amazon |
| CHAMPION Fits: all 1949 Commodore Series engines | 871 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.03" | View on Amazon |
| MOTORCRAFT Fits: all 1949 Commodore Series engines | SP473A | 🇺🇸 US | Copper Non-Resistor | View on Amazon |
| MOTORCRAFT Fits: all 1949 Commodore Series engines | SP473AX | 🇺🇸 US | Copper Non-Resistor | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
9 Spark Plug parts for the 1949 Hudson Commodore Series come from 3 brands — CHAMPION, MOTORCRAFT and ACDELCO. The "Popular" part is CHAMPION 841. Every part fits both the 4.2L 254cid L8 and the 4.3L 262cid L6.
Listed part numbers: CHAMPION 841, CHAMPION 844 and ACDELCO C45L, plus the other parts above.
Buying Ignition Parts for a 1949 Hudson Commodore Series
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Some ignition parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Distributor Rotor and Spark Plug .
Frequently Asked Questions
How many ignition parts fit the 1949 Hudson Commodore Series?
Our catalog currently lists 37 ignition parts for the 1949 Hudson Commodore Series across 8 subcategories and 9 brands, covering both the 4.2L 254cid L8 and the 4.3L 262cid L6. Each part is matched to the engine(s) it fits.
Do ignition parts differ between 1949 Hudson Commodore Series engines?
Some do. 20 parts fit every engine; the other 17 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 1949 Hudson Commodore Series?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1949 Hudson Commodore Series?
Notes on this page include pre-set gaps of 0.030" and 0.032". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1949 Hudson Commodore Series was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1949 Hudson Commodore Series?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1949 Hudson Commodore Series
Ignition Parts for Other Hudson Commodore Series Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.