2011 Hyundai Elantra Engine Parts

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: ELRING 725780.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

6 Camshaft Repair Sleeve parts are listed for the 2011 Hyundai Elantra, from NATIONAL, SKF, BCA and 3 other brands. NATIONAL 99139 carries the "Popular" badge. 1 part fits every engine; the other 5 are engine-specific.

This group includes NATIONAL 99139 and BCA NS99139 and the remaining parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

12 Camshaft Seal parts are listed for the 2011 Hyundai Elantra, from NATIONAL, SKF, TIMKEN and 9 other brands. NATIONAL 3771 carries the "Popular" badge. 1 part fits every engine; the other 11 are engine-specific.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2011 Hyundai Elantra — HYUNDAI 2244223500.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: HYUNDAI 235102E001.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts for the 2011 Hyundai Elantra come from 3 brands — TOPLINE, ENGINETECH and KING ENGINE BEARINGS.

Part numbers include ENGINETECH BB1200, KING ENGINE BEARINGS CR4235AM and TOPLINE RBHY23E, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

13 Conversion / Lower Gasket Set parts for the 2011 Hyundai Elantra come from 7 brands — FEL-PRO, AJUSA, APEX and 4 other brands. The "Popular" part is APEX ACS13028.

This table covers the crankshafts that turn piston motion into rotation. Read more

This group shows a single part: TOPLINE CSHY23E.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Crankshaft Main Bearing parts are listed for the 2011 Hyundai Elantra, from TOPLINE, ENGINETECH and KING ENGINE BEARINGS.

Listed part numbers: ENGINETECH BC1121, ENGINETECH BC1040 and KING ENGINE BEARINGS MB5256AM, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

10 Crankshaft Repair Sleeve parts are listed for the 2011 Hyundai Elantra, from WJB / INMOTION PARTS, BCA, NATIONAL and 2 other brands. BCA NS99315 carries the "Popular" badge.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

39 Crankshaft Seal parts are listed for the 2011 Hyundai Elantra, from VICTOR REINZ, FEL-PRO, NATIONAL and 10 other brands. FEL-PRO BS40742 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the bolts that clamp the cylinder head to the block. Read more

15 Cylinder Head Bolt parts for the 2011 Hyundai Elantra come from 10 brands — ENGINETECH, FEL-PRO, AJUSA and 7 other brands. The "Popular" part is ENGINETECH HB307.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

13 Cylinder Head Gasket parts for the 2011 Hyundai Elantra come from 8 brands — APEX, FEL-PRO, AJUSA and 5 other brands. The "Popular" part is APEX AHG1328. 1 part fits every engine; the other 12 are engine-specific.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

19 Cylinder Head Gasket Set parts for the 2011 Hyundai Elantra come from 10 brands — FEL-PRO, APEX, ENGINETECH and 7 other brands. The "Popular" part is APEX AHS13028. 1 part fits every engine; the other 18 are engine-specific.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: ENGINETECH CHS1047.

This table covers the Engine covers. Read more

6 Engine Cover parts for the 2011 Hyundai Elantra come from 2 brands — TECHPRO and VARIOUS MFR. The "Popular" part is TECHPRO HY1228166. 3 parts fit every engine; the other 3 are engine-specific.

Part numbers include TECHPRO HY1228166, TECHPRO HY1228170 and TECHPRO HY1228169, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Engine Kit Gasket Set parts for the 2011 Hyundai Elantra come from 7 brands — ENGINETECH, AJUSA, ELRING and 4 other brands. The "Popular" part is APEX AFS2068.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

9 Exhaust Valve parts are listed for the 2011 Hyundai Elantra, from ENGINETECH, MELLING, TOPLINE and 3 other brands. ENGINETECH EM1003 carries the "Popular" badge. 1 part fits every engine; the other 8 are engine-specific.

Part numbers include ENGINETECH EM1003, HYUNDAI 222122E000 and ENGINETECH V1795, among others listed above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Expansion Plug parts for the 2011 Hyundai Elantra come from 2 brands — ENGINETECH and TOPLINE.

Listed part numbers: ENGINETECH PK914 and TOPLINE EPSMI4.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

10 Harmonic Balancer parts for the 2011 Hyundai Elantra come from 6 brands — DAYCO, HYUNDAI, ACKOJA and 3 other brands. The "Popular" part is DAYCO PB1762N. 1 part fits every engine; the other 9 are engine-specific.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS IMA146.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Intake Manifold Gasket parts for the 2011 Hyundai Elantra come from 7 brands — FEL-PRO, MAHLE / CLEVITE, AJUSA and 4 other brands. The "Popular" part is FEL-PRO MS97230. 1 part fits every engine; the other 11 are engine-specific.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2011 Hyundai Elantra — ELRING 853640.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

11 Intake Valve parts are listed for the 2011 Hyundai Elantra, from HYUNDAI, MELLING, ENGINETECH and 3 other brands. HYUNDAI 2221123600 carries the "Popular" badge.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

26 Motor Mount parts are listed for the 2011 Hyundai Elantra, from WESTAR, DEA / MARMON RIDE CONTROL, ANCHOR and 5 other brands. SKP SKM9797 carries the "Popular" badge. They are grouped as Economy and Standard Replacement, with Standard Replacement the largest group at 7 parts from DEA / MARMON RIDE CONTROL, WESTAR, ANCHOR and 2 other brands.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

One part is listed for the 2011 Hyundai Elantra — DEA / MARMON RIDE CONTROL A4127.

This table covers the Motor Mount kits. Read more

ANCHOR supplies the 3 Motor Mount Kit parts for the 2011 Hyundai Elantra.

This group includes ANCHOR 300192, ANCHOR 300191 and ANCHOR 300462.