The 2015 Hyundai Elantra has 183 engine parts with verified fitment on this page — 36 part types and 44 brands, covering both the 1.8L L4 and the 2.0L L4. Each part includes a manufacturer part number and application notes.
On the 2015 Hyundai Elantra, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Variable Valve Timing (VVT) Solenoid / Actuator (27 parts), Crankshaft Seal (16 parts) and Motor Mount (10 parts). The other 33 part types cover the remaining 130 parts.
The 2015 Hyundai Elantra was sold with both the 1.8L L4 and the 2.0L L4. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2015 Hyundai Elantra engine parts are TOPLINE (15 parts), ENGINETECH (11 parts) and AJUSA (11 parts), plus 41 more brands. Quality grades include Standard Replacement and Economy.
35 parts on this 2015 Hyundai Elantra page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including APEX ACS13028 (Conversion / Lower Gasket Set) and NATIONAL 99157 (Crankshaft Repair Sleeve). Click any part number to see every vehicle that part fits.
Connecting Rod
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HYUNDAI Fits: 1.8L L4 | 235102E101 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | From 11/23/2011For vehicle built in USA | View on Amazon |
| TOPLINE Fits: 1.8L L4 | CRHY23 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the connecting rods between each piston and the crankshaft.
2 Connecting Rod parts for the 2015 Hyundai Elantra come from 2 brands — HYUNDAI and TOPLINE.
Listed part numbers: HYUNDAI 235102E101 and TOPLINE CRHY23.
Connecting Rod Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 1.8L L4 | BB1100 | 🇺🇸 US | Set | View on Amazon |
| TOPLINE Fits: 1.8L L4 | RBHY23 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
2 Connecting Rod Bearing parts for the 2015 Hyundai Elantra come from 2 brands — ENGINETECH and TOPLINE.
Part numbers include ENGINETECH BB1100 and TOPLINE RBHY23.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 1.8L L4 | ACS13028 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FEL-PRO Popular Fits: 1.8L L4 | CS26561 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes RTV Sealant | View on Amazon |
| AJUSA Fits: 1.8L L4 | 54245200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # G4NB | View on Amazon |
| ENGINETECH Fits: 1.8L L4 | HY18CS | 🇺🇸 US | Oil Pan Gasket not Included | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 1.8L L4 | 0929307 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 1.8L L4 | CS55000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
6 Conversion / Lower Gasket Set parts for the 2015 Hyundai Elantra come from 6 brands — APEX, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is APEX ACS13028.
Part numbers include APEX ACS13028, FEL-PRO CS26561 and AJUSA 54245200, among others listed above.
Crankshaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOPLINE Fits: 1.8L L4 | CSHY23 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | (6.3 mm tooth-width silent gear) | View on Amazon |
This table covers the crankshafts that turn piston motion into rotation.
This group shows a single part: TOPLINE CSHY23.
Crankshaft Main Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 1.8L L4 | BC1121 | 🇺🇸 US | Set | View on Amazon |
| TOPLINE Fits: 1.8L L4 | TWHY23 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Thrust Bearing | View on Amazon |
| TOPLINE Fits: 1.8L L4 | MBHY23 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| TOPLINE Fits: 1.8L L4 | MBHY23L | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
4 Crankshaft Main Bearing parts are listed for the 2015 Hyundai Elantra, from TOPLINE and ENGINETECH.
This group includes ENGINETECH BC1121, TOPLINE TWHY23 and TOPLINE MBHY23 and the remaining parts above.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: 1.8L L4 | 99157 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| BCA Fits: 1.8L L4 | NS99157 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| SCHAEFFLER Fits: 1.8L L4 | SR3483 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontFits Shaft Diameters of 1.572"-1.578" | View on Amazon |
| WJB / INMOTION PARTS Fits: 1.8L L4 | WS99157 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| WJB / INMOTION PARTS Fits: 1.8L L4 | WS99333 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
5 Crankshaft Repair Sleeve parts are listed for the 2015 Hyundai Elantra, from WJB / INMOTION PARTS, NATIONAL, BCA and 1 other brand. NATIONAL 99157 carries the "Popular" badge.
This group includes NATIONAL 99157, BCA NS99157 and SCHAEFFLER SR3483 and the remaining parts above.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 1.8L L4 | BS40742 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber | View on Amazon |
| NATIONAL Popular Fits: 1.8L L4 | 710308 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| NATIONAL Popular Fits: 1.8L L4 | 710879 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| SCHAEFFLER Popular Fits: 1.8L L4 | SS2662 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front5.994 mm Width | View on Amazon |
| AJUSA Fits: 1.8L L4 | 15109600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear85 x 119 x 9 | View on Amazon |
| APEX Fits: 1.8L L4 | ABS1328 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| APEX Fits: 1.8L L4 | ATC13280 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| BCA Fits: 1.8L L4 | NS710308 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| ELRING Fits: 1.8L L4 | 854180 | 🇨🇦 CA | Height [MM]: 6Inner Diameter [mm]: 40 | View on Amazon |
| ELRING Fits: 1.8L L4 | 811090 | 🇨🇦 CA | Inner Diameter [mm]: 85Material: FPM (Fluoride Rubber) | View on Amazon |
| FEL-PRO Fits: 1.8L L4 | TCS46167 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| MAHLE / CLEVITE Fits: 1.8L L4 | 68022 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fluoroelastomer | View on Amazon |
| SKF Fits: 1.8L L4 | 33662A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| VICTOR REINZ Fits: 1.8L L4 | 811053200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Improved Design | View on Amazon |
| VICTOR REINZ Fits: 1.8L L4 | 191038301 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| WJB / INMOTION PARTS Fits: 1.8L L4 | WS710308 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
16 Crankshaft Seal parts are listed for the 2015 Hyundai Elantra, from FEL-PRO, NATIONAL, APEX and 8 other brands. FEL-PRO BS40742 carries the "Popular" badge.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 1.8L L4 | HB307 | 🇺🇸 US | Set | View on Amazon |
| AJUSA Fits: 1.8L L4 | 81066700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # G4NB | View on Amazon |
| FEL-PRO Fits: 1.8L L4 | ES73257 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 1.8L L4 | GS33858 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Cylinder Head Bolt KitIncludes Washers | View on Amazon |
| TOPLINE Fits: 1.8L L4 | HBHY23 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
5 Cylinder Head Bolt parts for the 2015 Hyundai Elantra come from 5 brands — ENGINETECH, AJUSA, FEL-PRO and 2 other brands. The "Popular" part is ENGINETECH HB307.
Listed part numbers: ENGINETECH HB307, AJUSA 81066700 and FEL-PRO ES73257, plus the other parts above.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 1.8L L4 | AHG1407 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 1.8L L4 | 10226700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| ELRING Fits: 1.8L L4 | 812450 | 🇨🇦 CA | Material: Multi-Layer Steel (MLS)Thickness [MM]: 0,4 | View on Amazon |
| MAHLE / CLEVITE Fits: 1.8L L4 | 55001 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi-Layered Steel | View on Amazon |
| VICTOR REINZ Fits: 1.8L L4 | 611133400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Cylinder Head Gasket parts for the 2015 Hyundai Elantra come from 5 brands — APEX, AJUSA, ELRING and 2 other brands. The "Popular" part is APEX AHG1407.
Listed part numbers: APEX AHG1407, AJUSA 10226700 and ELRING 812450, plus the other parts above.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 1.8L L4 | HY18HSA | 🇺🇸 US | Includes Multi-Layer Steel Head Gasket | View on Amazon |
| ENGINETECH Popular Fits: 1.8L L4 | HY18HSAWB | 🇺🇸 US | Includes Multi-Layer Steel Head Gasket, Head Bolts | View on Amazon |
| AJUSA Fits: 1.8L L4 | 52469700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # G4NB | View on Amazon |
| ELRING Fits: 1.8L L4 | 864470 | 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 1.8L L4 | 0910113 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 1.8L L4 | HS55001 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi-Layered SteelIncludes Valve Stem Seals | View on Amazon |
| TOPLINE Fits: 1.8L L4 | HSHY23 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Valve Stem Seals | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
7 Cylinder Head Gasket Set parts for the 2015 Hyundai Elantra come from 6 brands — ENGINETECH, AJUSA, ELRING and 3 other brands. The "Popular" part is ENGINETECH HY18HSA.
Part numbers include ENGINETECH HY18HSA, ENGINETECH HY18HSAWB and AJUSA 52469700, among others listed above.
Engine Block Heater
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KAT'S HEATERS Fits: 1.8L L4 | 11812 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Heater Cartridge | View on Amazon |
| KAT'S HEATERS Fits: 1.8L L4 | 28812 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Heater Replacement Cord | View on Amazon |
This table covers the block heaters that warm the coolant or oil in cold weather.
KAT'S HEATERS supplies both parts for the 2015 Hyundai Elantra.
Listed part numbers: KAT'S HEATERS 11812 and KAT'S HEATERS 28812.
Engine Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TECHPRO Popular Fits: 1.8L L4 | HY1228179 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right LowerFor vehicle built in USA | View on Amazon |
| TECHPRO Popular Fits: 1.8L L4 | HY1228183 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits FrontLower | View on Amazon |
| TECHPRO Fits: 1.8L L4 | HY1228180 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | CAPA Certified | View on Amazon |
| VARIOUS MFR Fits: 1.8L L4 | HY1228179 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right LowerFor vehicle built in USA | View on Amazon |
| VARIOUS MFR Fits: 1.8L L4 | HY1228183 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits FrontLower | View on Amazon |
| VARIOUS MFR Fits: 1.8L L4 | HY1228180 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | CAPA Certified | View on Amazon |
This table covers the Engine covers.
6 Engine Cover parts for the 2015 Hyundai Elantra come from 2 brands — TECHPRO and VARIOUS MFR. The "Popular" part is TECHPRO HY1228179.
Listed part numbers: TECHPRO HY1228179, TECHPRO HY1228183 and TECHPRO HY1228180, plus the other parts above.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.8L L4 | 50426500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # G4NB | View on Amazon |
| ELRING Fits: 1.8L L4 | B34550 | 🇨🇦 CA | with valve stem seals | View on Amazon |
| ENGINETECH Fits: 1.8L L4 | HY18K2 | 🇺🇸 US | Oil Pan Gasket not Included | View on Amazon |
| TOPLINE Fits: 1.8L L4 | CGSHY23 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
4 Engine Kit Gasket Set parts for the 2015 Hyundai Elantra come from 4 brands — AJUSA, ELRING, ENGINETECH and 1 other brand.
This group includes AJUSA 50426500, ELRING B34550 and ENGINETECH HY18K2 and the remaining parts above.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HYUNDAI Popular Fits: 1.8L L4 | 222122E000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ENGINETECH Fits: 1.8L L4 | V1795 | 🇺🇸 US | .2150 stem1.105 Head | View on Amazon |
| MELLING Fits: 1.8L L4 | V5571 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| QUALCAST Fits: 1.8L L4 | 1030105 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0.215 Stem. Elantra | View on Amazon |
| TOPLINE Fits: 1.8L L4 | EVHY23 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
5 Exhaust Valve parts are listed for the 2015 Hyundai Elantra, from HYUNDAI, ENGINETECH, MELLING and 2 other brands. HYUNDAI 222122E000 carries the "Popular" badge.
Part numbers include HYUNDAI 222122E000, ENGINETECH V1795 and MELLING V5571, among others listed above.
Harmonic Balancer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DAYCO Popular Fits: 1.8L L4 | PB1762N | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Premium | View on Amazon |
| HYUNDAI Popular Fits: 1.8L L4 | 231242E000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Korea Built | View on Amazon |
| ACKOJA Fits: 1.8L L4 | A520605 | 🇺🇸 US 🇨🇦 CA | with OE No. 231242E000Pulley Only | View on Amazon |
| ATP Fits: 1.8L L4 | 102358 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Automatic trans.GL Model or Limited | View on Amazon |
| HL MANDO Fits: 1.8L L4 | 30A5020 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | New | View on Amazon |
| PIONEER Fits: 1.8L L4 | DA7043 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Automatic trans.GL Model or Limited | View on Amazon |
This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.
6 Harmonic Balancer parts for the 2015 Hyundai Elantra come from 6 brands — DAYCO, HYUNDAI, ACKOJA and 3 other brands. The "Popular" part is DAYCO PB1762N.
Listed part numbers: DAYCO PB1762N, HYUNDAI 231242E000 and ACKOJA A520605, plus the other parts above.
Intake Manifold Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 1.8L L4 | IMA146 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
This group shows a single part: STANDARD MOTOR PRODUCTS IMA146.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 1.8L L4 | MS97230 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| AJUSA Fits: 1.8L L4 | 13276100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # G4NB | View on Amazon |
| APEX Fits: 1.8L L4 | AMS13280 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| ELRING Fits: 1.8L L4 | B66030 | 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 1.8L L4 | MS19947 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMolded Rubber | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Intake Manifold Gasket parts for the 2015 Hyundai Elantra come from 5 brands — FEL-PRO, AJUSA, APEX and 2 other brands. The "Popular" part is FEL-PRO MS97230.
Part numbers include FEL-PRO MS97230, AJUSA 13276100 and APEX AMS13280, among others listed above.
Intake Plenum Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 1.8L L4 | 853640 | 🇨🇦 CA | Number of Seals: 2 | View on Amazon |
This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2015 Hyundai Elantra — ELRING 853640.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 1.8L L4 | V5565 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ENGINETECH Fits: 1.8L L4 | V1794 | 🇺🇸 US | .2155 stem1.301 Head | View on Amazon |
| HYUNDAI Fits: 1.8L L4 | 222112E400 | 🇺🇸 US | View on Amazon | |
| QUALCAST Fits: 1.8L L4 | 1030104 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0.215 Stem | View on Amazon |
| TOPLINE Fits: 1.8L L4 | IVHY23 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
5 Intake Valve parts are listed for the 2015 Hyundai Elantra, from MELLING, ENGINETECH, HYUNDAI and 2 other brands. MELLING V5565 carries the "Popular" badge.
Listed part numbers: MELLING V5565, ENGINETECH V1794 and HYUNDAI 222112E400, plus the other parts above.
Motor Mount
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 1.8L L4 | SKM9797 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightHydraulic | View on Amazon |
| SKP Fits: 1.8L L4 | SKM9778 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Lower | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Popular Fits: 1.8L L4 | 9797 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightHydraulic | View on Amazon |
| BECK/ARNLEY Fits: 1.8L L4 | 1042348 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightKOREA BUILT | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 1.8L L4 | A71020 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Mounting Bracket Included: YES | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 1.8L L4 | A71004 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Upper, Korean Built | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 1.8L L4 | A71047 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Upper, USA Built Vehicle | View on Amazon |
| PIONEER Fits: 1.8L L4 | 619797 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front UpperKorea part | View on Amazon |
| WESTAR Fits: 1.8L L4 | EM7064 | 🇺🇸 US | Front | View on Amazon |
| WESTAR Fits: 1.8L L4 | EM7057 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontMade in Korea | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
10 Motor Mount parts are listed for the 2015 Hyundai Elantra, from DEA / MARMON RIDE CONTROL, SKP, WESTAR and 3 other brands. SKP SKM9797 carries the "Popular" badge.
In the Economy grade, SKP supplies 2 parts: the catalog's value-priced group. A representative part number is SKP SKM9797.
The Standard Replacement section lists 8 options from DEA / MARMON RIDE CONTROL, WESTAR, ANCHOR and 2 other brands — built to original-equipment specification. ANCHOR 9797 is listed in this group.
Motor Mount Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 1.8L L4 | 300192 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Manual trans. | View on Amazon |
| ANCHOR Fits: 1.8L L4 | 300191 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Automatic trans. | View on Amazon |
This table covers the Motor Mount kits.
ANCHOR supplies both parts for the 2015 Hyundai Elantra.
This group includes ANCHOR 300192 and ANCHOR 300191.
Oil Dipstick / Tube
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 1.8L L4 | 917437 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Dipstick Only | View on Amazon |
This table covers the Oil Dipstick tubes.
One part is listed for the 2015 Hyundai Elantra — DORMAN 917437.
Timing Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOPLINE Fits: 1.8L L4 | TCHY23E | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 10mm engine mount stud | View on Amazon |
This table covers the Timing covers.
This group shows a single part: TOPLINE TCHY23E.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 1.8L L4 | 68021 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fluoroelastomer | View on Amazon |
| SKF Fits: 1.8L L4 | 15957 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Timing Cover Seal parts are listed for the 2015 Hyundai Elantra, from MAHLE / CLEVITE and SKF.
Listed part numbers: MAHLE / CLEVITE 68021 and SKF 15957.
Torque Strut Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Popular Fits: 1.8L L4 | 9761 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Lower | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 1.8L L4 | A71209 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LowerKorean Built, Solid | View on Amazon |
| HYUNDAI Fits: 1.8L L4 | 219503X000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LowerBracket Assembly Roll Rod | View on Amazon |
| PIONEER Fits: 1.8L L4 | 631020 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Lower | View on Amazon |
| WESTAR Fits: 1.8L L4 | EM7065 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Lower | View on Amazon |
This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
5 Torque Strut Mount parts for the 2015 Hyundai Elantra come from 5 brands — ANCHOR, DEA / MARMON RIDE CONTROL, HYUNDAI and 2 other brands. The "Popular" part is ANCHOR 9761.
This group includes ANCHOR 9761, DEA / MARMON RIDE CONTROL A71209 and HYUNDAI 219503X000 and the remaining parts above.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACKOJA Fits: 1.8L L4 | A529643 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with OE No. 224102E000 | View on Amazon |
| APEX Fits: 1.8L L4 | VCS1328 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Gasket | View on Amazon |
| AUTOTECNICA Fits: 1.8L L4 | HY1418468 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| SKP Fits: 1.8L L4 | SK510028 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Valve covers.
4 Valve Cover parts for the 2015 Hyundai Elantra come from 4 brands — ACKOJA, APEX, AUTOTECNICA and 1 other brand.
Part numbers include ACKOJA A529643, APEX VCS1328 and AUTOTECNICA HY1418468, among others listed above.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Popular Fits: 1.8L L4 | 864490 | 🇨🇦 CA | Material: Zinc-Copper brazing alloy (ZN-CU) | View on Amazon |
| FEL-PRO Popular Fits: 1.8L L4 | VS50824R | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Permadry Molded RubberIncludes Spark Plug Tube Seals | View on Amazon |
| AJUSA Fits: 1.8L L4 | 56064800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # G4NB | View on Amazon |
| APEX Fits: 1.8L L4 | AVC1328S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Spark Plug Tube Seals | View on Amazon |
| BECK/ARNLEY Fits: 1.8L L4 | 0361997 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Spark Plug Tube Seals | View on Amazon |
| ELRING Fits: 1.8L L4 | 819490 | 🇨🇦 CA | Material: Polyacrylate Rubber (ACM) | View on Amazon |
| HYUNDAI Fits: 1.8L L4 | 224412E000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Included with Valve Cover | View on Amazon |
| MAHLE / CLEVITE Fits: 1.8L L4 | VS50644S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 1.8L L4 | VS50644 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMolded Rubber | View on Amazon |
| VICTOR REINZ Fits: 1.8L L4 | 151090601 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetIncludes Spark Plug Tube Seals | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
10 Valve Cover Gasket parts are listed for the 2015 Hyundai Elantra, from ELRING, MAHLE / CLEVITE, FEL-PRO and 5 other brands. ELRING 864490 carries the "Popular" badge.
Valve Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 1.8L L4 | GD1797BR | 🇺🇸 US | Bronze | View on Amazon |
| QUALCAST Fits: 1.8L L4 | 303154 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.740 OAL. 0.2168 I.D. 0.4358 O.D. | View on Amazon |
| TOPLINE Fits: 1.8L L4 | VGHY11 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.
3 Valve Guide parts are listed for the 2015 Hyundai Elantra, from ENGINETECH, QUALCAST and TOPLINE.
Listed part numbers: ENGINETECH GD1797BR, QUALCAST 303154 and TOPLINE VGHY11.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 1.8L L4 | L2312 | 🇺🇸 US | View on Amazon | |
| HYUNDAI Popular Fits: 1.8L L4 | 246102E000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ACKOJA Fits: 1.8L L4 | A520739 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with OE No. 246102E000 | View on Amazon |
| AJUSA Fits: 1.8L L4 | 85020200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # G4NB | View on Amazon |
| INA Fits: 1.8L L4 | VT0086 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 1.8L L4 | JB2091 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hydraulic | View on Amazon |
| TOPLINE Fits: 1.8L L4 | LIFHY23 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
7 Valve Lifter parts are listed for the 2015 Hyundai Elantra, from ENGINETECH, HYUNDAI, ACKOJA and 4 other brands. ENGINETECH L2312 carries the "Popular" badge.
Part numbers include ENGINETECH L2312, HYUNDAI 246102E000 and ACKOJA A520739, among others listed above.
Valve Spring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 1.8L L4 | VS2511 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| QUALCAST Fits: 1.8L L4 | 322511 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.810 Free Length | View on Amazon |
This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.
2 Valve Spring parts for the 2015 Hyundai Elantra come from 2 brands — MELLING and QUALCAST.
Listed part numbers: MELLING VS2511 and QUALCAST 322511.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HYUNDAI Fits: 1.8L L4 | 2222302500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 1.8L L4 | VL1060 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Valve Stem Diameter: 0.215 in | View on Amazon |
| QUALCAST Fits: 1.8L L4 | 345008 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1 Round Groove. 0.215 Stem DIA. | View on Amazon |
| SBI Fits: 1.8L L4 | 1211060 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2190 Length | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
4 Valve Spring Retainer Keeper parts for the 2015 Hyundai Elantra come from 4 brands — HYUNDAI, MELLING, QUALCAST and 1 other brand.
Listed part numbers: HYUNDAI 2222302500, MELLING VL1060 and QUALCAST 345008, plus the other parts above.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 1.8L L4 | AVS2085 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| FEL-PRO Popular Fits: 1.8L L4 | SS71268 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| AJUSA Fits: 1.8L L4 | 12025500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 4.5 x 10.8 x 19.8Engine # G4NB | View on Amazon |
| AJUSA Fits: 1.8L L4 | 57047000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # G4NB | View on Amazon |
| MAHLE / CLEVITE Fits: 1.8L L4 | SS45992 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMetal with Molded Rubber | View on Amazon |
| QUALCAST Fits: 1.8L L4 | 38610155 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Viton Top Hat | View on Amazon |
| SBI Fits: 1.8L L4 | 1221440 | 🇺🇸 US 🇨🇦 CA | Intake and ExhaustViton Material | View on Amazon |
| TOPLINE Fits: 1.8L L4 | VSSHY11 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VICTOR REINZ Fits: 1.8L L4 | 121012201 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
9 Valve Stem Seal parts are listed for the 2015 Hyundai Elantra, from AJUSA, APEX, FEL-PRO and 5 other brands. APEX AVS2085 carries the "Popular" badge.
Listed part numbers: APEX AVS2085, FEL-PRO SS71268 and AJUSA 12025500, plus the other parts above.
Variable Valve Timing (VVT) Solenoid / Actuator
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 1.8L L4 | SK918034 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
| SKP Popular Fits: 1.8L L4 | SK918033 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| ULTRA-POWER Popular Fits: 1.8L L4 | 918034 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
| ULTRA-POWER Popular Fits: 1.8L L4 | 918033 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| DORMAN Fits: 1.8L L4 | 918033 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| DORMAN Fits: 1.8L L4 | 918034 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
| GATES Fits: 1.8L L4 | VVS139 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| GATES Fits: 1.8L L4 | VVS138 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
| HOLSTEIN Fits: 1.8L L4 | 2VTS0113 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
| HOLSTEIN Fits: 1.8L L4 | 2VTS0112 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| ROSTRA Fits: 1.8L L4 | 790046 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| ROSTRA Fits: 1.8L L4 | 790050 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
| WALKER PRODUCTS Fits: 1.8L L4 | 5901059 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Oil Control Valve | View on Amazon |
| WALKER PRODUCTS Fits: 1.8L L4 | 5901060 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Oil Control Valve | View on Amazon |
| WELLS Fits: 1.8L L4 | 2T1102 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Oil Control Valve | View on Amazon |
| WELLS Fits: 1.8L L4 | 2T1103 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Oil Control Valve | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HL MANDO Popular Fits: 1.8L L4 | 22A1171 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | New | View on Amazon |
| HL MANDO Popular Fits: 1.8L L4 | 22A1156 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | New | View on Amazon |
| AISIN Fits: 1.8L L4 | OCVK004 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
| AISIN Fits: 1.8L L4 | OCVK024 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| BECK/ARNLEY Fits: 1.8L L4 | 0242043 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Oil Control Valve | View on Amazon |
| BECK/ARNLEY Fits: 1.8L L4 | 0242042 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Oil Control Valve | View on Amazon |
| CLOYES Fits: 1.8L L4 | VTS137 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| CLOYES Fits: 1.8L L4 | VTS145 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
| NTK Fits: 1.8L L4 | VV0086 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Oil Control Valve | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 1.8L L4 | VVT117 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Blue Streak | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 1.8L L4 | VVT115 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Blue Streak | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
27 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2015 Hyundai Elantra, from SKP, ULTRA-POWER, DORMAN and 11 other brands. SKP SK918034 carries the "Popular" badge. They are grouped as Economy and Standard Replacement, with Economy the largest group at 16 parts from SKP, ULTRA-POWER, DORMAN and 5 other brands.
Variable Valve Timing (VVT) Solenoid Gasket / Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 1.8L L4 | 853630 | 🇨🇦 CA | transmission sidedGL Model | View on Amazon |
This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: ELRING 853630.
Variable Valve Timing (VVT) Sprocket
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 1.8L L4 | SKVVT718 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| AUTOTECNICA Fits: 1.8L L4 | HY1421808 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: 1.8L L4 | VVT718 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| GATES Fits: 1.8L L4 | VCP856 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
| HYUNDAI Fits: 1.8L L4 | 243502E011 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 1.8L L4 | VVT717 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
This table covers the cam phaser sprockets used by the variable-valve-timing system.
6 Variable Valve Timing (VVT) Sprocket parts are listed for the 2015 Hyundai Elantra, from STANDARD MOTOR PRODUCTS, SKP, AUTOTECNICA and 2 other brands. SKP SKVVT718 carries the "Popular" badge.
Economy: 2 parts, from SKP and AUTOTECNICA. A representative part number is SKP SKVVT718.
The Standard Replacement section: 4 options from STANDARD MOTOR PRODUCTS, GATES and HYUNDAI. STANDARD MOTOR PRODUCTS VVT718 is listed in this group.
Part numbers include SKP SKVVT718, AUTOTECNICA HY1421808 and STANDARD MOTOR PRODUCTS VVT718, among others listed above.
Variable Valve Timing (VVT) Sprocket Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 1.8L L4 | VCB104 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Variable Valve Timing (VVT) Sprocket Bolt | View on Amazon |
This table covers the Variable Valve Timing (VVT) Sprocket bolts.
This group shows a single part: CLOYES VCB104.
Buying Engine Parts for a 2015 Hyundai Elantra
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Variable Valve Timing (VVT) Solenoid / Actuator and Crankshaft Seal .
Frequently Asked Questions
How many engine parts fit the 2015 Hyundai Elantra?
Our catalog currently lists 183 engine parts for the 2015 Hyundai Elantra across 36 subcategories and 44 brands, covering both the 1.8L L4 and the 2.0L L4. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2015 Hyundai Elantra engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2015 Hyundai Elantra?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2015 Hyundai Elantra was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2015 Hyundai Elantra?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2015 Hyundai Elantra
Engine Parts for Other Hyundai Elantra Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.