2019 Hyundai Santa Fe Engine Parts

This table covers the Balance shafts. Read more

This group shows a single part: HYUNDAI 233002GGC0.

This table covers the camshafts that open the valves. Read more

HYUNDAI supplies both parts for the 2019 Hyundai Santa Fe. 1 part fits every engine; the other 1 is engine-specific.

This group includes HYUNDAI 241002GTB0 and HYUNDAI 242002GGA0.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 127610.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2019 Hyundai Santa Fe — TOPLINE CRHY24.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2019 Hyundai Santa Fe — TOPLINE RBHY11L.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts are listed for the 2019 Hyundai Santa Fe, from MAHLE / CLEVITE, AJUSA, ENGINETECH and 1 other brand. 1 part fits every engine; the other 4 are engine-specific.

This group includes AJUSA 54310300, ENGINETECH HY24CSC and MAHLE / CLEVITE CS55400 and the remaining parts above.

This table covers the crankshafts that turn piston motion into rotation. Read more

One part is listed for the 2019 Hyundai Santa Fe — TOPLINE CSHY11.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Crankshaft Main Bearing parts for the 2019 Hyundai Santa Fe come from TOPLINE. Every part fits both the 2.0L L4 Turbocharged and the 2.4L L4.

Part numbers include TOPLINE TWHY11 and TOPLINE MBHY11L.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 2019 Hyundai Santa Fe come from 4 brands — WJB / INMOTION PARTS, BCA, NATIONAL and 1 other brand. 3 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: BCA NS99166, NATIONAL 99166 and SKF 99334, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

24 Crankshaft Seal parts for the 2019 Hyundai Santa Fe come from 15 brands — APEX, VICTOR REINZ, FEL-PRO and 12 other brands. The "Popular" part is BCA NS224200. 18 parts fit every engine; the other 6 are engine-specific.

This table covers the bolts that clamp the cylinder head to the block. Read more

9 Cylinder Head Bolt parts are listed for the 2019 Hyundai Santa Fe, from MAHLE / CLEVITE, AJUSA, FEL-PRO and 5 other brands. AJUSA 81045900 carries the "Popular" badge. 4 parts fit every engine; the other 5 are engine-specific.

This group includes AJUSA 81045900, FEL-PRO ES724651 and MAHLE / CLEVITE GS33547 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Cylinder Head Gasket parts are listed for the 2019 Hyundai Santa Fe, from ELRING, MAHLE / CLEVITE, APEX and 2 other brands. FEL-PRO 26706PT carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Cylinder Head Gasket Set parts are listed for the 2019 Hyundai Santa Fe, from MAHLE / CLEVITE, TOPLINE, AJUSA and 2 other brands. MAHLE / CLEVITE HS55342 carries the "Popular" badge.

This group includes MAHLE / CLEVITE HS55342, AJUSA 52576800 and ELRING B14990 and the remaining parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2019 Hyundai Santa Fe come from KAT'S HEATERS. Every part fits both the 2.0L L4 Turbocharged and the 2.4L L4.

This group includes KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

2 Engine Cover parts are listed for the 2019 Hyundai Santa Fe, from TECHPRO and VARIOUS MFR. All of them fit every engine offered in the 2019 Santa Fe.

Part numbers include TECHPRO HY1228196, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts are listed for the 2019 Hyundai Santa Fe, from TOPLINE, AJUSA and ELRING.

This group includes AJUSA 50528500, ELRING 982490 and TOPLINE CGSHY20GT and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts for the 2019 Hyundai Santa Fe come from 5 brands — MELLING, ENGINETECH, QUALCAST and 2 other brands. The "Popular" part is MELLING V3256. 1 part fits every engine; the other 5 are engine-specific.

Part numbers include MELLING V3256, ENGINETECH EM4435 and MELLING V5833, among others listed above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts are listed for the 2019 Hyundai Santa Fe, from ATP, DORMAN, HL MANDO and 1 other brand. All of them fit every engine offered in the 2019 Santa Fe.

Part numbers include ATP 102422, DORMAN 594768 and HL MANDO 30A5034, among others listed above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

4 Intake Manifold parts for the 2019 Hyundai Santa Fe come from 3 brands — HYUNDAI, ACKOJA and SKP.

Listed part numbers: ACKOJA A520157, HYUNDAI 283102GTA1 and HYUNDAI 283102GGA0, plus the other parts above.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

4 Intake Manifold Actuator parts are listed for the 2019 Hyundai Santa Fe, from ACKOJA, DORMAN, SKP and 1 other brand.

This group includes ACKOJA A52770072, DORMAN 911923 and SKP SK911923 and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Intake Manifold Gasket parts are listed for the 2019 Hyundai Santa Fe, from ELRING, AJUSA, MAHLE / CLEVITE and 1 other brand. MAHLE / CLEVITE MS20331 carries the "Popular" badge. 1 part fits every engine; the other 6 are engine-specific.

Part numbers include MAHLE / CLEVITE MS20331, AJUSA 13240100 and AJUSA 13240200, among others listed above.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Intake Manifold Runner Control Valve / Solenoid parts are listed for the 2019 Hyundai Santa Fe, from SKP and STANDARD MOTOR PRODUCTS.

Listed part numbers: SKP SKIMRC6 and STANDARD MOTOR PRODUCTS IMRC6.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 883790.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts for the 2019 Hyundai Santa Fe come from 5 brands — MELLING, ENGINETECH, QUALCAST and 2 other brands. The "Popular" part is MELLING V3255. 4 parts fit every engine; the other 1 is engine-specific.

This group includes MELLING V3255, ENGINETECH IM4436 and QUALCAST 1013190 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

7 Motor Mount parts for the 2019 Hyundai Santa Fe come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

Listed part numbers: ANCHOR 10058, ANCHOR 9989 and DEA / MARMON RIDE CONTROL A71124, plus the other parts above.

This table covers the Motor Mount kits. Read more

3 Motor Mount Kit parts for the 2019 Hyundai Santa Fe come from ANCHOR.

Listed part numbers: ANCHOR 300879, ANCHOR 300472 and ANCHOR 300880.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

137 Oil parts for the 2019 Hyundai Santa Fe come from 7 brands — VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands. The "Popular" part is MOBIL 125195. Conventional, Full Synthetic, Heavy Duty / Diesel, High Mileage (>75,000 Miles), Racing and Synthetic Blend are all represented, and Full Synthetic alone accounts for 87 parts.