2025 Hyundai Santa Fe Engine Parts

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Crankshaft Seal parts are listed for the 2025 Hyundai Santa Fe, from ELRING and FEL-PRO.

Part numbers include ELRING B06520 and FEL-PRO BS40740.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts for the 2025 Hyundai Santa Fe come from 2 brands — ELRING and FEL-PRO.

Part numbers include ELRING B06610 and FEL-PRO 26925PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: ELRING B06600.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO HY1228230.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING B06660.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

One part is listed for the 2025 Hyundai Santa Fe — WESTAR EM7705.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

35 Oil parts are listed for the 2025 Hyundai Santa Fe, from VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. LIQUI MOLY 22044 carries the "Popular" badge. They are grouped as Full Synthetic and High Mileage (>75,000 Miles), with Full Synthetic the largest group at 28 parts from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

One part is listed for the 2025 Hyundai Santa Fe — NISSENS 91729.

This table covers the drain plugs in the oil pan. Read more

3 Oil Drain Plug parts are listed for the 2025 Hyundai Santa Fe, from DORMAN and REIN.

Listed part numbers: DORMAN 090033, DORMAN 090053 and REIN HWU0110.

This table covers the caps on the oil filler neck. Read more

MOTORAD supplies both parts for the 2025 Hyundai Santa Fe.

Part numbers include MOTORAD MO151 and MOTORAD MO223.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

9 Oil Filter parts are listed for the 2025 Hyundai Santa Fe, from PRO-TEC, CHAMP / LUBER-FINER, FVP and 6 other brands. PRO-TEC PXL10473 carries the "Popular" badge.

In the Economy grade, PRO-TEC, CHAMP / LUBER-FINER and FVP supply 3 parts: the catalog's value-priced group. A representative part number is PRO-TEC PXL10473.

The Standard Replacement section lists 6 options from WIX, BECK/ARNLEY, FEL-PRO and 3 other brands — built to original-equipment specification. WIX WL10473 is listed in this group.

This group includes PRO-TEC PXL10473, CHAMP / LUBER-FINER P1083 and FVP G0473 and the remaining parts above.

This table covers the Oil Filter covers. Read more

This group shows a single part: MOTORAD MO387.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

ELRING supplies both parts for the 2025 Hyundai Santa Fe.

This group includes ELRING B06530 and ELRING B07000.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING B07160.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Torque Strut Mount parts for the 2025 Hyundai Santa Fe come from 2 brands — ANCHOR and WESTAR.

This group includes ANCHOR 10250 and WESTAR EM7609.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING B06680.

This table covers the fasteners that mount the turbocharger. Read more

This group shows a single part: ELRING B06710.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

One part is listed for the 2025 Hyundai Santa Fe — SUNSONG 5804236.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2025 Hyundai Santa Fe — ELRING B06620.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

This group shows a single part: MELLING VL1060.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

ELRING supplies both parts for the 2025 Hyundai Santa Fe.

Listed part numbers: ELRING 330310 and ELRING 342000.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

3 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2025 Hyundai Santa Fe, from HYUNDAI and STANDARD MOTOR PRODUCTS.

Part numbers include HYUNDAI 2435508000, HYUNDAI 243572M000 and STANDARD MOTOR PRODUCTS VVT749.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

HYUNDAI supplies both parts for the 2025 Hyundai Santa Fe.

This group includes HYUNDAI 243702M800 and HYUNDAI 243502M800.