2024 Hyundai Creta Engine Parts

Engine:
1.5L L4

The 2024 Hyundai Creta has 28 engine parts with verified fitment on this page — 14 part types and 7 brands, covering the 1.5L L4 engine. Each part includes a manufacturer part number and application notes.

The engine on the 2024 Hyundai Creta covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil Drain Plug (5 parts), Oil Drain Plug Gasket (4 parts) and Valve Stem Seal (4 parts). The other 11 part types cover the remaining 15 parts.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA 54334200
🇲🇽 MX
Engine # G4FL
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Seal

Brand Part Number Markets Notes Buy
AJUSA 15096400
🇲🇽 MX
Rear76 X 108 X 8
Fitment notes — AJUSA 15096400
Rear76 X 108 X 8Counter ClockwiseEngine # G4FL
View on
Amazon
AJUSA 15128800
🇲🇽 MX
FrontClockwise
Fitment notes — AJUSA 15128800
FrontClockwiseEngine # G4FL
View on
Amazon
ELRING 318360
🇲🇽 MX
Outer Diameter [mm]: 108Radial Shaft Seal Design: ASW
Fitment notes — ELRING 318360
Outer Diameter [mm]: 108Radial Shaft Seal Design: ASWSwirl Type: Left-hand Twist
GLS IVT
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
AJUSA 81086800
🇲🇽 MX
Engine # G4FL
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
AJUSA 10273500
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10273500
Multi Layered Steel
77.3 Bore DiameterEngine # G4FL
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
AJUSA 52649100
🇲🇽 MX
Engine # G4FL
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA 50576300
🇲🇽 MX
Engine # G4FL
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
AJUSA 13344200
🇲🇽 MX
UpperEngine # G4FL
View on
Amazon
AJUSA 13344300
🇲🇽 MX
LowerEngine # G4FL
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Drain Plug

Brand Part Number Markets Notes Buy
DORMAN Popular 090053
🇲🇽 MX
MetalPilot Point
Fitment notes — DORMAN 090053
MetalPilot PointM14-1.50Head Size 16MM
M14 x 1.50 Thread
View on
Amazon
DORMAN 090033
🇲🇽 MX
StandardM14-1.50
Fitment notes — DORMAN 090033
StandardM14-1.50Head Size 17MM
.551" LengthM14 x 1.50 Thread
View on
Amazon
ELRING 523500
🇲🇽 MX
with Seal RingBolt Head-/Nut Design: Male Hex
Fitment notes — ELRING 523500
with Seal RingBolt Head-/Nut Design: Male HexThread Size: M14X1,5x15
GLS IVT
View on
Amazon
ELRING 523480
🇲🇽 MX
without Seal RingThread Size: M14X1,5x15
Fitment notes — ELRING 523480
without Seal RingThread Size: M14X1,5x15
GLS IVT
View on
Amazon
SKP SK090053CD
🇲🇽 MX
Metal
Fitment notes — SKP SK090053CD
Metal
16 mm HeadThread Pitch: 1.5 mm
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
AJUSA 22007100
🇲🇽 MX
Engine # G4FL
View on
Amazon
DORMAN 095147
🇲🇽 MX
SizeM14
Fitment notes — DORMAN 095147
SizeM14Inside Dia: 0.556"/14.12mmOutside Dia.: 0.7875"/20mmThickness: 0.055"/1.41mm
View on
Amazon
DORMAN 995147CD
🇲🇽 MX
View on
Amazon
ELRING 726760
🇲🇽 MX
Material: Aluminium
Fitment notes — ELRING 726760
Material: Aluminium
GLS IVT
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filter

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
MOBIL M1C159A
🇲🇽 MX
Extended Performance
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
VARIOUS MFR PO99518EX
🇲🇽 MX
Extended Life
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
AJUSA 56096500
🇲🇽 MX
Engine # G4FL
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Lifter

Brand Part Number Markets Notes Buy
AJUSA 85025400
🇲🇽 MX
Engine # G4FL
View on
Amazon

This table covers the lifters / tappets that transfer cam motion to the valves.

Valve Stem Seal

Brand Part Number Markets Notes Buy
AJUSA 57070400
🇲🇽 MX
Engine # G4FL
View on
Amazon
AJUSA 12030100
🇲🇽 MX
Intake4.1 X 9.75 X 12
Fitment notes — AJUSA 12030100
Intake4.1 X 9.75 X 12Engine # G4FL
View on
Amazon
AJUSA 12033800
🇲🇽 MX
Exhaust4.35 X 9.75 X 12
Fitment notes — AJUSA 12033800
Exhaust4.35 X 9.75 X 12Engine # G4FL
View on
Amazon
ELRING 330310
🇲🇽 MX
Height [MM]: 12Outer Diameter [MM]: 12,85
Fitment notes — ELRING 330310
Height [MM]: 12Outer Diameter [MM]: 12,85Outside Diameter: 12.85 mm
GLS IVT
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Variable Valve Timing (VVT) Solenoid / Actuator

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS VVT421
🇲🇽 MX
Intake
View on
Amazon

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.

Buying Engine Parts for a 2024 Hyundai Creta

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Confirm you have the 1.5L L4 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Drain Plug and Oil Drain Plug Gasket .

Frequently Asked Questions

How many engine parts fit the 2024 Hyundai Creta?

Our catalog currently lists 28 engine parts for the 2024 Hyundai Creta across 14 subcategories and 7 brands, covering the 1.5L L4 engine. Each part is matched to the engine(s) it fits.

What are the signs of engine problems on a 2024 Hyundai Creta?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2024 Hyundai Creta was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2024 Hyundai Creta?

Every part on this page is matched to the 1.5L L4 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2024 Hyundai Creta

Engine Parts for Other Hyundai Creta Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.