2018 Hyundai Creta Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2018 Hyundai Creta — KING ENGINE BEARINGS CR4575SM.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts are listed for the 2018 Hyundai Creta, from AJUSA and ELRING.

This group includes AJUSA 54244600 and ELRING 332450.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS MB5706SI.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Crankshaft Seal parts for the 2018 Hyundai Creta come from 3 brands — ELRING, AJUSA and VICTOR REINZ. The "Popular" part is ELRING 902760.

Listed part numbers: ELRING 902760, VICTOR REINZ 815406800 and AJUSA 15096500, plus the other parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

One part is listed for the 2018 Hyundai Creta — AJUSA 81061400.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Cylinder Head Gasket parts are listed for the 2018 Hyundai Creta, from AJUSA, ELRING and VICTOR REINZ.

Listed part numbers: AJUSA 10197100, ELRING 933930 and VICTOR REINZ 615402000.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts are listed for the 2018 Hyundai Creta, from AJUSA and ELRING.

Listed part numbers: AJUSA 52468600, AJUSA 52573500 and ELRING 065780.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts are listed for the 2018 Hyundai Creta, from AJUSA and ELRING.

Part numbers include AJUSA 50425400, AJUSA 50525400 and ELRING 550130.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

One part is listed for the 2018 Hyundai Creta — DORMAN 594501.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Manifold Gasket parts are listed for the 2018 Hyundai Creta, from ELRING, AJUSA and VICTOR REINZ.

Listed part numbers: AJUSA 13275000, ELRING 705040 and ELRING 808600, plus the other parts above.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts for the 2018 Hyundai Creta come from 4 brands — ELRING, DORMAN, AGS and 1 other brand. The "Popular" part is DORMAN 090033.

This group includes DORMAN 090033, DORMAN 090053 and AGS ODP00007 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Drain Plug Gasket parts are listed for the 2018 Hyundai Creta, from DORMAN, AJUSA and ELRING.

This group includes AJUSA 22007100, DORMAN 095147 and DORMAN 995147CD and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

This group shows a single part: MOTORAD MO81.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

9 Oil Filter parts for the 2018 Hyundai Creta come from 7 brands — VARIOUS MFR, WIX, FVP and 4 other brands. The "Popular" part is WIX 51334XP.

The Economy section lists 3 options from FVP, PRO-TEC and VARIOUS MFR — the catalog's value-priced group. FVP R1334A is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 51334XP is listed in this group.

In the Standard Replacement grade, WIX, MAHLE / CLEVITE, MANN and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is WIX 51334.

This group includes WIX 51334XP, FVP R1334A and PRO-TEC PXL51334 and the remaining parts above.

This table covers the oil pans that hold the engine's oil sump. Read more

2 Oil Pan parts are listed for the 2018 Hyundai Creta, from AUTOTECNICA and DORMAN.

Part numbers include AUTOTECNICA HY1416216 and DORMAN 264464.

This table covers the timing chains that keep the cams in time with the crank. Read more

One part is listed for the 2018 Hyundai Creta — CLOYES C531.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

2 Timing Chain & Component Kit parts for the 2018 Hyundai Creta come from 2 brands — CLOYES and INA.

Listed part numbers: CLOYES 90531SX and INA ZC76305.

This table covers the guides and dampers that keep the timing chain on its path. Read more

CLOYES supplies both parts for the 2018 Hyundai Creta.

Part numbers include CLOYES 96183 and CLOYES 96184.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: CLOYES 95559.

This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: ELRING 430950.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Valve Cover Gasket parts for the 2018 Hyundai Creta come from 2 brands — AJUSA and ELRING.

This group includes AJUSA 56082200 and ELRING 547460.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Valve Stem Seal parts for the 2018 Hyundai Creta come from 2 brands — AJUSA and ELRING. The "Popular" part is AJUSA 57070400.

This group includes AJUSA 57070400, ELRING 342000 and AJUSA 12030100 and the remaining parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS VVT114.