2006 International 8000 Series Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

10 Engine parts are listed for the 2006 International 8000 Series, in 4 part types, covering all 3 engine options (11.1L DIESEL, 12.5L DIESEL and 9.3L L6 DIESEL Turbocharged). Each one has a brand, a manufacturer part number and notes that say where it fits.

The engine on the 2006 International 8000 Series covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil (5 parts), Oil Filter (2 parts) and Valve Spring (2 parts). The other 1 part type covers the remaining 1 part.

Oil

Summary: Notes list SAE 10W-30 and SAE 15W-40. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include VALVOLINE.

Full Synthetic

Brand Part Number Markets Notes Buy
VALVOLINE Fits: 11.1L DIESEL, 12.5L DIESEL 909772
🇺🇸 US 🇨🇦 CA
Heavy Duty Full Synthetic SAE 15W-40 DIESEL1 Gallon
View on
Amazon

Heavy Duty / Diesel

Brand Part Number Markets Notes Buy
VALVOLINE Fits: 11.1L DIESEL, 12.5L DIESEL 909778
🇺🇸 US 🇨🇦 CA
Heavy Duty Conventional SAE 15W-40 DIESEL1 Gallon
View on
Amazon

Synthetic Blend

Brand Part Number Markets Notes Buy
VALVOLINE Fits: 11.1L DIESEL, 12.5L DIESEL 909766
🇺🇸 US 🇨🇦 CA
Heavy Duty Synthetic Blend SAE 15W-40 DIESEL1 Gallon
View on
Amazon
VALVOLINE Fits: 11.1L DIESEL, 12.5L DIESEL 909776
🇺🇸 US 🇨🇦 CA
Heavy Duty Synthetic Blend SAE 10W-30 DIESEL1 Gallon
View on
Amazon
VALVOLINE Fits: 11.1L DIESEL, 12.5L DIESEL 909782
🇺🇸 US 🇨🇦 CA
Heavy Duty Synthetic Blend SAE 15W-40 DIESEL2.5 Gallon
View on
Amazon

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.

Oil Filter

Brand Part Number Markets Notes Buy
HASTINGS / BALDWIN Fits: 11.1L DIESEL, 12.5L DIESEL LF567
🇺🇸 US 🇨🇦 CA
View on
Amazon
WIX Fits: 11.1L DIESEL, 12.5L DIESEL 57792
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Turbocharger Gasket

Brand Part Number Markets Notes Buy
GPD Fits: 12.5L DIESEL 2535040
🇺🇸 US 🇨🇦 CA
Only Fits Compatible Aftermarket TurbochargersC13 Acert Production Engine
View on
Amazon

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Spring

Brand Part Number Markets Notes Buy
MELLING Fits: 11.1L DIESEL, 12.5L DIESEL VS1462
🇺🇸 US 🇨🇦 CA
InnerOE 2244441
Fitment notes — MELLING VS1462
InnerOE 2244441OE 7W7083
InnerOE 2140586OE 3322152
View on
Amazon
MELLING Fits: 11.1L DIESEL, 12.5L DIESEL VS1463
🇺🇸 US 🇨🇦 CA
OuterOE 2140586
Fitment notes — MELLING VS1463
OuterOE 2140586OE 3322152OE 7W7082
View on
Amazon

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.

Buying Engine Parts for a 2006 International 8000 Series

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil and Oil Filter .

Frequently Asked Questions

How many engine parts fit the 2006 International 8000 Series?

Our catalog currently lists 10 engine parts for the 2006 International 8000 Series across 4 subcategories and 5 brands, covering all 3 engine options (11.1L DIESEL, 12.5L DIESEL and 9.3L L6 DIESEL Turbocharged). Each part is matched to the engine(s) it fits.

Do engine parts differ between 2006 International 8000 Series engines?

Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2006 International 8000 Series?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What oil viscosity is listed for the 2006 International 8000 Series?

Oil rows on this page include SAE 10W-30 and SAE 15W-40. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2006 International 8000 Series was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2006 International 8000 Series?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2006 International 8000 Series

Engine Parts for Other International 8000 Series Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.