2007 International 8000 Series Engine Parts

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2007 International 8000 Series — DURA-BOND IN24.

This table covers the high-pressure oil pumps that fire HEUI diesel injectors. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

2 High Pressure Diesel Injection Oil Pump (HPOP) parts for the 2007 International 8000 Series come from STANDARD MOTOR PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS HPI9 and STANDARD MOTOR PRODUCTS HPI14.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

5 Oil parts for the 2007 International 8000 Series come from VALVOLINE.

The Full Synthetic section lists 1 option from VALVOLINE — full-synthetic oils. VALVOLINE 909772 is listed in this group.

The Heavy Duty / Diesel section lists 1 option from VALVOLINE — grouped under the catalog's "Heavy Duty / Diesel" designation — the notes column spells out what sets them apart. VALVOLINE 909778 is listed in this group.

The Synthetic Blend section lists 3 options from VALVOLINE — synthetic-blend oils. VALVOLINE 909766 is listed in this group.

This group includes VALVOLINE 909772, VALVOLINE 909778 and VALVOLINE 909766 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2007 International 8000 Series — DORMAN 0955002.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

16 Oil Filter parts for the 2007 International 8000 Series come from 5 brands — HASTINGS / BALDWIN, WIX, VARIOUS MFR and 2 other brands. The "Popular" part is WIX 57744XD.

The Economy section lists 1 option from VARIOUS MFR — the catalog's value-priced group. VARIOUS MFR PG5335 is listed in this group.

The High Performance / Heavy Duty section lists 3 options from WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 57744XD is listed in this group.

In the Standard Replacement grade, HASTINGS / BALDWIN, HENGST, MANN and 2 other brands supply 10 parts: built to original-equipment specification. A representative part number is HASTINGS / BALDWIN LF597.

2 further parts sit outside the graded sections, with the same engine-level match.

This table covers the oil pans that hold the engine's oil sump. Read more

7 Oil Pan parts are listed for the 2007 International 8000 Series, from DORMAN, SPECTRA PREMIUM and SKP.

This group includes DORMAN 2645054, DORMAN 2645006 and DORMAN 2645104 and the remaining parts above.

This table covers the Oil Temperature senders. Read more

2 Oil Temperature Sender parts are listed for the 2007 International 8000 Series, from DORMAN and HOLSTEIN.

This group includes DORMAN 9047549 and HOLSTEIN 2OTS0002.

This table covers the rings that seal each piston to the cylinder wall. Read more

HASTINGS MANUFACTURING supplies the 3 Piston Ring parts for the 2007 International 8000 Series.

Part numbers include HASTINGS MANUFACTURING 2D7276S, HASTINGS MANUFACTURING 2D7276 and HASTINGS MANUFACTURING 2D7484.

This table covers the turbochargers that compress intake air. Read more

4 Turbocharger parts for the 2007 International 8000 Series come from GPD.

Listed part numbers: GPD 2511890, GPD 2513053 and GPD 2511475, plus the other parts above.

This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

One part is listed for the 2007 International 8000 Series — DORMAN 9047130.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

GPD supplies both parts for the 2007 International 8000 Series.

Part numbers include GPD 2535040 and GPD 2535058.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

2 Turbocharger Oil Line parts for the 2007 International 8000 Series come from 2 brands — GATES and TERREPOWER.

Listed part numbers: GATES TL137 and TERREPOWER TO92696.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: DORMAN 2645124.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

MELLING supplies both parts for the 2007 International 8000 Series.

Part numbers include MELLING VS1462 and MELLING VS1463.