2011 International Paystar Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

8 Coolant / Antifreeze parts for the 2011 International Paystar come from 3 brands — VALVOLINE, PRESTONE and PEAK. The "Popular" part is VALVOLINE 719009. Every part fits all 3 engine options (10.8L L6 DIESEL Turbocharged, 14.9L L6 DIESEL Turbocharged and 8.9L L6 DIESEL Turbocharged).

The Economy section lists 1 option from VALVOLINE — the catalog's value-priced group. VALVOLINE 719009 is listed in this group.

In the Heavy Duty grade, PRESTONE, VALVOLINE and PEAK supply 7 parts: rated for severe service. A representative part number is VALVOLINE ZXG051.

Listed part numbers: VALVOLINE 719009, VALVOLINE ZXG051 and PEAK FCA1GAL, plus the other parts above.

This table covers the Coolant filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

6 Coolant Filter parts for the 2011 International Paystar come from 3 brands — DONALDSON, HASTINGS / BALDWIN and WIX.

Part numbers include DONALDSON P550867, DONALDSON P550866 and HASTINGS / BALDWIN WC16, among others listed above.

This table covers the Coolant Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

This group shows a single part: GPD 1816611.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

4 Coolant Reservoir parts are listed for the 2011 International Paystar, from GPD, DORMAN and SKP. 3 parts fit every engine; the other 1 is engine-specific.

This group includes DORMAN 6035103, GPD 2421002 and GPD 2421030 and the remaining parts above.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

4 Coolant Reservoir Cap parts are listed for the 2011 International Paystar, from DORMAN, GATES, MOTORAD and 1 other brand. 2 parts fit every engine; the other 2 are engine-specific.

Part numbers include DORMAN 9025102, GATES 31405 and MOTORAD T39, among others listed above.

This table covers the adapters used to pressure-test this cooling system. Read more

2 Cooling System Tester Adapter parts for the 2011 International Paystar come from GATES.

Part numbers include GATES 31379 and GATES 31410.

This table covers the Hose clamps. Read more

This group shows a single part: DORMAN 9044000.

This table covers the intercoolers that cool turbo or supercharger charge air. Read more

6 Intercooler parts for the 2011 International Paystar come from 2 brands — GPD and SPECTRA PREMIUM. The "Popular" part is SPECTRA PREMIUM 44013530. Every part fits all 3 engine options (10.8L L6 DIESEL Turbocharged, 14.9L L6 DIESEL Turbocharged and 8.9L L6 DIESEL Turbocharged).

Listed part numbers: SPECTRA PREMIUM 44013530, SPECTRA PREMIUM 44013523 and GPD 2711538, plus the other parts above.

This table covers the Intercooler Air Hose pipes. Read more

2 Intercooler Air Hose / Pipe parts for the 2011 International Paystar come from 2 brands — CONTINENTAL and GATES.

This group includes CONTINENTAL 57513 and GATES 26203.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

6 Radiator parts for the 2011 International Paystar come from 3 brands — GPD, SPECTRA PREMIUM and OSC. The "Popular" part is SPECTRA PREMIUM 20013561P. 5 parts fit every engine; the other 1 is engine-specific.

The Economy section: 4 options from GPD. GPD 9282762 is listed in this group.

In the Standard Replacement grade, SPECTRA PREMIUM and OSC supply 2 parts: built to original-equipment specification. A representative part number is SPECTRA PREMIUM 20013561P.

Part numbers include SPECTRA PREMIUM 20013561P, GPD 9282762 and GPD 9282763, among others listed above.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

This group shows a single part: GATES 31567.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

8 Radiator Hose parts are listed for the 2011 International Paystar, from GATES, CONTINENTAL and DAYCO. DAYCO 71812 carries the "Popular" badge.

The Standard Replacement section: 6 options from CONTINENTAL, GATES and DAYCO. DAYCO 71812 is listed in this group.

The Universal Hose (Straight, Bulk) section lists 2 options from GATES — grouped under the catalog's "Universal Hose (Straight, Bulk)" designation — the notes column spells out what sets them apart. GATES 24440 is listed in this group.

This group includes DAYCO 71812, GATES 21891 and CONTINENTAL 60832 and the remaining parts above.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

2 Temperature Sender / Sensor parts for the 2011 International Paystar come from 2 brands — DORMAN and GPD.

Part numbers include DORMAN 9047137 and GPD 1814588.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

18 Thermostat parts are listed for the 2011 International Paystar, from MOTORAD, CALORSTAT, GATES and 1 other brand. GATES 34148 carries the "Popular" badge.

The Heavy Duty section: 5 options from GATES and STANT. GATES 34148 is listed in this group.

The Standard Replacement section: 9 options from MOTORAD and CALORSTAT. CALORSTAT THS1910582 is listed in this group.

4 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Thermostat / Thermostat Housing / Water Outlet Seal parts for the 2011 International Paystar come from DAYTON.

Listed part numbers: DAYTON 6745008G and DAYTON 6745003G.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

25 Water Pump parts are listed for the 2011 International Paystar, from US MOTOR WORKS, GMB, FVP and 4 other brands. US MOTOR WORKS US932 carries the "Popular" badge.

Economy: 7 parts, from US MOTOR WORKS, FVP and WJB / INMOTION PARTS. A representative part number is US MOTOR WORKS US932.

In the High Volume / Pressure grade, GATES supplies 2 parts: grouped under the catalog's "High Volume / Pressure" designation — the notes column spells out what sets them apart. A representative part number is GATES 45055HD.

The Standard Replacement section: 9 options from GMB and DAYCO. DAYCO DP1732 is listed in this group.

7 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the Water Pump Seal O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2011 International Paystar — DORMAN 9045129.