The 2013 International Transtar has 7 engine parts with verified fitment on this page — 2 part types and 4 brands, covering both the 10.5L L6 DIESEL Turbocharged and the 12.4L L6 DIESEL Turbocharged. Each part includes a manufacturer part number and application notes.
The engine on the 2013 International Transtar covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. All 7 listed parts are Oil Filter (5 parts) and Turbocharger (2 parts).
The 2013 International Transtar was sold with both the 10.5L L6 DIESEL Turbocharged and the 12.4L L6 DIESEL Turbocharged. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2013 International Transtar engine parts are WIX (2 parts), HASTINGS / BALDWIN (2 parts) and GPD (2 parts), plus 1 more brand.
1 part on this 2013 International Transtar page carries a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — WIX WL10047 (Oil Filter). Click any part number to see every vehicle that part fits.
Oil Filter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WIX Popular Fits: 12.4L L6 DIESEL Turbocharged | WL10047 | 🇺🇸 US | Full flow | View on Amazon |
| HASTINGS / BALDWIN Fits: 12.4L L6 DIESEL Turbocharged | BC7485 | 🇺🇸 US 🇨🇦 CA | Centrifuge | View on Amazon |
| HASTINGS / BALDWIN Fits: 12.4L L6 DIESEL Turbocharged | LF672 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| HENGST Fits: 12.4L L6 DIESEL Turbocharged | E422H01D211 | 🇺🇸 US 🇨🇦 CA | Includes Gasket SetCartridge | View on Amazon |
| WIX Fits: 12.4L L6 DIESEL Turbocharged | 57467 | 🇺🇸 US | BypassCentrifuge Type | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
5 Oil Filter parts are listed for the 2013 International Transtar, from WIX, HASTINGS / BALDWIN and HENGST. WIX WL10047 carries the "Popular" badge.
Part numbers include WIX WL10047, HASTINGS / BALDWIN BC7485 and HASTINGS / BALDWIN LF672, among others listed above.
Turbocharger
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GPD Fits: 12.4L L6 DIESEL Turbocharged | 2511538 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GPD Fits: 12.4L L6 DIESEL Turbocharged | 2511990 | 🇺🇸 US 🇨🇦 CA | Original Equipment (OE) Specificationswith Original Equipment (OE) # 3004743C94 | View on Amazon |
This table covers the turbochargers that compress intake air.
GPD supplies both parts for the 2013 International Transtar.
Part numbers include GPD 2511538 and GPD 2511990.
Buying Engine Parts for a 2013 International Transtar
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil Filter and Turbocharger .
Frequently Asked Questions
How many engine parts fit the 2013 International Transtar?
Our catalog currently lists 7 engine parts for the 2013 International Transtar across 2 subcategories and 4 brands, covering both the 10.5L L6 DIESEL Turbocharged and the 12.4L L6 DIESEL Turbocharged. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2013 International Transtar engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2013 International Transtar?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2013 International Transtar was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2013 International Transtar?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2013 International Transtar
Engine Parts for Other International Transtar Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.