2016 Jaguar Xe Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

60 Engine parts are listed for the 2016 Jaguar Xe, in 19 part types, covering both the 2.0L L4 Turbocharged and the 3.0L V6 Supercharged. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 2016 Jaguar Xe, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Oil Filter (11 parts), Oil Drain Plug (10 parts) and Cylinder Head Gasket (6 parts). The other 16 part types cover the remaining 33 parts.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 Turbocharged 54185800
🇲🇽 MX
Engine # 204PT
View on
Amazon
AJUSA Fits: 3.0L V6 Supercharged 54281300
🇲🇽 MX
Engine # 306PS
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 Turbocharged 15093400
🇲🇽 MX
FrontClockwise
Fitment notes — AJUSA 15093400
FrontClockwiseEngine # 204PT
View on
Amazon
AJUSA Fits: 2.0L L4 Turbocharged 71003700
🇲🇽 MX
RearEngine # 204PT
View on
Amazon
AJUSA Fits: 3.0L V6 Supercharged 15104700
🇲🇽 MX
Front45 x 91.5 x 20.5
Fitment notes — AJUSA 15104700
Front45 x 91.5 x 20.5ClockwiseEngine # 306PS
View on
Amazon
AJUSA Fits: 3.0L V6 Supercharged 71012000
🇲🇽 MX
RearEngine # 306PS
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 Turbocharged 81035200
🇲🇽 MX
Engine # 204PT
View on
Amazon
AJUSA Fits: 3.0L V6 Supercharged 81065600
🇲🇽 MX
Engine # 306PS
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 Turbocharged 10196300
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10196300
Multi Layered Steel
89 Bore DiameterEngine # 204PT
View on
Amazon
AJUSA Fits: 3.0L V6 Supercharged 10222300
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10222300
Multi Layered Steel
Right85.5 Bore DiameterEngine # 306PS
View on
Amazon
AJUSA Fits: 3.0L V6 Supercharged 10222400
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10222400
Multi Layered Steel
Left85.5 Bore DiameterEngine # 306PS
View on
Amazon
AJUSA Fits: 3.0L V6 Supercharged 52526600
🇲🇽 MX
RightEngine # 306PS
View on
Amazon
AJUSA Fits: 3.0L V6 Supercharged 52526700
🇲🇽 MX
LeftEngine # 306PS
View on
Amazon
VICTOR REINZ Fits: 2.0L L4 Turbocharged 613629000
🇲🇽 MX
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 Turbocharged 52358500
🇲🇽 MX
Engine # 204PT
View on
Amazon
AJUSA Fits: 3.0L V6 Supercharged 52526800
🇲🇽 MX
Complete Set
Fitment notes — AJUSA 52526800
Complete Set
Engine # 306PS
View on
Amazon
VICTOR REINZ Fits: 2.0L L4 Turbocharged 023629002
🇲🇽 MX
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 Turbocharged 50323600
🇲🇽 MX
Engine # 204PT
View on
Amazon
AJUSA Fits: 3.0L V6 Supercharged 50479600
🇲🇽 MX
Engine # 306PS
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

High Pressure Diesel Injection Oil Pump (HPOP)

Brand Part Number Markets Notes Buy
MARELLI Fits: all 2016 Xe engines PHP1025
🇲🇽 MX
View on
Amazon

This table covers the high-pressure oil pumps that fire HEUI diesel injectors. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 Turbocharged 13238000
🇲🇽 MX
Engine # 204PT
View on
Amazon
AJUSA Fits: 3.0L V6 Supercharged 13269200
🇲🇽 MX
Engine # 306PS
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intake Plenum Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 3.0L V6 Supercharged 01478800
🇲🇽 MX
Engine # 306PS
View on
Amazon

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Drain Plug

Economy

Brand Part Number Markets Notes Buy
DORMAN Fits: 2.0L L4 Turbocharged 090175
🇲🇽 MX
Integrated GasketM12 x 1.75 Thread
View on
Amazon

Twist Drain

Brand Part Number Markets Notes Buy
DORMAN Fits: 2.0L L4 Turbocharged 092018
🇲🇽 MX
Thread Size: M12-1.75Twist Style
View on
Amazon
Brand Part Number Markets Notes Buy
AGS Popular Fits: 3.0L V6 Supercharged ODP00007
🇲🇽 MX
M14x1.50
View on
Amazon
DORMAN Popular Fits: 3.0L V6 Supercharged 090053
🇲🇽 MX
MetalPilot Point
Fitment notes — DORMAN 090053
MetalPilot PointM14-1.50Head Size 16MM
M14 x 1.50 Thread
View on
Amazon
AGS Fits: 2.0L L4 Turbocharged ODP00009
🇲🇽 MX
M12x1.75
View on
Amazon
AGS Fits: 3.0L V6 Supercharged ODP00012
🇲🇽 MX
M16x1.50
View on
Amazon
DORMAN Fits: 2.0L L4 Turbocharged 090034
🇲🇽 MX
M12 x 1.75 Thread
Fitment notes — DORMAN 090034
M12 x 1.75 Thread
Gasket Included
View on
Amazon
DORMAN Fits: 3.0L V6 Supercharged 090115
🇲🇽 MX
Pilot PointM14-1.50
Fitment notes — DORMAN 090115
Pilot PointM14-1.50Head Size 13MM
View on
Amazon
DORMAN Fits: 3.0L V6 Supercharged 092020
🇲🇽 MX
Thread Size: M14-1.50Twist Style
View on
Amazon
SKP Fits: 3.0L V6 Supercharged SK090053CD
🇲🇽 MX
Metal
Fitment notes — SKP SK090053CD
Metal
Fits:
Multi-Fitor 16 MM Heador Pilot Pointor Shank Length: 0.85"
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 3.0L V6 Supercharged 01115300
🇲🇽 MX
Engine # 306PS
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filler Cap

Brand Part Number Markets Notes Buy
MOTORAD Fits: 3.0L V6 Supercharged MO119
🇲🇽 MX
View on
Amazon

This table covers the caps on the oil filler neck.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
FVP Fits: 2.0L L4 Turbocharged R1348
🇲🇽 MX
Spin-On Filter
Fitment notes — FVP R1348
Spin-On Filter
OE# C2Z 21964
View on
Amazon
PRO-TEC Fits: 2.0L L4 Turbocharged PXL51348
🇲🇽 MX
Spin-On Filter
View on
Amazon
VARIOUS MFR Fits: 2.0L L4 Turbocharged PG241
🇲🇽 MX
Spin-On
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
WIX Fits: 2.0L L4 Turbocharged 51348XP
🇲🇽 MX
XP Extreme DutyBest for Synthetic Motor Oils
Fitment notes — WIX 51348XP
XP Extreme DutyBest for Synthetic Motor OilsSpin-On Filter
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
MOTORCRAFT Popular Fits: 2.0L L4 Turbocharged FL910S
🇲🇽 MX
OE Design3/4" Thread
View on
Amazon
WIX Popular Fits: 2.0L L4 Turbocharged 51348
🇲🇽 MX
Bypass Relief Valve Setting: 8-11 PSISpin-On Filter
View on
Amazon
ACDELCO Fits: 2.0L L4 Turbocharged PF671
🇺🇸 US 🇨🇦 CA
Gold / ProfessionalSpin-On
Fitment notes — ACDELCO PF671
Gold / ProfessionalSpin-On
79 mm Long
View on
Amazon
MOTORCRAFT Fits: 2.0L L4 Turbocharged FL2114
🇲🇽 MX
Retail Spec
View on
Amazon
VARIOUS MFR Fits: 2.0L L4 Turbocharged PG241EX
🇲🇽 MX
Extended LifeSpin-On
View on
Amazon
Brand Part Number Markets Notes Buy
ACDELCO Fits: 3.0L V6 Supercharged PF659
🇺🇸 US 🇨🇦 CA
Gold / ProfessionalCartridge
View on
Amazon
VARIOUS MFR Fits: 3.0L V6 Supercharged PG6290EX
🇲🇽 MX
Extended Life
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Filter Adapter Gasket / O-Ring

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 Turbocharged 01061600
🇲🇽 MX
View on
Amazon

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Piston Ring

Brand Part Number Markets Notes Buy
HASTINGS MANUFACTURING Fits: 2.0L L4 Turbocharged 2C4150S
🇲🇽 MX
1 Cylinder SetChrome Top Ring
Fitment notes — HASTINGS MANUFACTURING 2C4150S
1 Cylinder SetChrome Top RingTop Groove: 1.20 mm2nd Groove: 1.50 mm1st Oil Groove: 2.00 mmFor 2 Ring Piston
Engine. Bore (in.): 3.445 (Size: Standard)
View on
Amazon
HASTINGS MANUFACTURING Fits: 2.0L L4 Turbocharged 2C4150
🇲🇽 MX
Full SetTop Ring Surface Treatment: Chrome
Fitment notes — HASTINGS MANUFACTURING 2C4150
Full SetTop Ring Surface Treatment: ChromeTop Groove: 1.20 mm2nd Groove: 1.50 mm1ST Oil Groove: 2.00 mmfor 2 Ring Piston
Engine. Bore (in.): 3.445 (Size: Standard)
View on
Amazon

This table covers the rings that seal each piston to the cylinder wall.

Turbocharger Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 Turbocharged JTC11700
🇲🇽 MX
Mounting Gasket Set
Fitment notes — AJUSA JTC11700
Mounting Gasket Set
Engine # 204PT
View on
Amazon

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Turbocharger Oil Line

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 Turbocharged OP10544
🇲🇽 MX
Engine # 204PTSupply Tube
View on
Amazon
AJUSA Fits: 2.0L L4 Turbocharged OPR00158
🇲🇽 MX
Engine # 204PTReturn Line
View on
Amazon

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 Turbocharged 56051800
🇲🇽 MX
Engine # 204PT
View on
Amazon
AJUSA Fits: 3.0L V6 Supercharged 56062400
🇲🇽 MX
RightEngine # 306PS
View on
Amazon
AJUSA Fits: 3.0L V6 Supercharged 56062300
🇲🇽 MX
LeftEngine # 306PS
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Stem Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 Turbocharged 57043100
🇲🇽 MX
Engine # 204PT
View on
Amazon
AJUSA Fits: 2.0L L4 Turbocharged 12022500
🇲🇽 MX
Intake4.5 x 11 x 17.5
Fitment notes — AJUSA 12022500
Intake4.5 x 11 x 17.5Engine # 204PT
View on
Amazon
AJUSA Fits: 2.0L L4 Turbocharged 12022501
🇲🇽 MX
Exhaust4.5 x 11 x 17.5
Fitment notes — AJUSA 12022501
Exhaust4.5 x 11 x 17.5Engine # 204PT
View on
Amazon
AJUSA Fits: 3.0L V6 Supercharged 57074400
🇲🇽 MX
Engine # 306PS
View on
Amazon
AJUSA Fits: 3.0L V6 Supercharged 12036300
🇲🇽 MX
4.5 x 9.75 x 15.5Engine # 306PS
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 2016 Jaguar Xe

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter and Oil Drain Plug .

Frequently Asked Questions

How many engine parts fit the 2016 Jaguar Xe?

Our catalog currently lists 60 engine parts for the 2016 Jaguar Xe across 19 subcategories and 14 brands, covering both the 2.0L L4 Turbocharged and the 3.0L V6 Supercharged. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2016 Jaguar Xe engines?

Some do. 1 part fits every engine; the other 59 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2016 Jaguar Xe?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2016 Jaguar Xe was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2016 Jaguar Xe?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2016 Jaguar Xe

Engine Parts for Other Jaguar Xe Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.