2018 Jaguar Xe Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts are listed for the 2018 Jaguar Xe, from AJUSA and MAHLE / CLEVITE.

Part numbers include AJUSA 54281300 and MAHLE / CLEVITE CS55478.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Crankshaft Seal parts for the 2018 Jaguar Xe come from 3 brands — AJUSA, FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: AJUSA 15104700, AJUSA 71012000 and FEL-PRO BS40795, plus the other parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts are listed for the 2018 Jaguar Xe, from AJUSA and MAHLE / CLEVITE.

Listed part numbers: AJUSA 81065600 and MAHLE / CLEVITE GS34044.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Cylinder Head Gasket parts are listed for the 2018 Jaguar Xe, from AJUSA, APEX and MAHLE / CLEVITE. AJUSA 10222300 carries the "Popular" badge.

This group includes AJUSA 10222300, AJUSA 10222400 and AJUSA 52526600 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts are listed for the 2018 Jaguar Xe, from AJUSA and MAHLE / CLEVITE.

Part numbers include AJUSA 52526800 and MAHLE / CLEVITE HS55478.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2018 Jaguar Xe — AJUSA 50479600.

This table covers the high-pressure oil pumps that fire HEUI diesel injectors. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

This group shows a single part: MARELLI PHP1025.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts are listed for the 2018 Jaguar Xe, from AJUSA and MAHLE / CLEVITE.

Part numbers include AJUSA 13269200 and MAHLE / CLEVITE MS20589.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 01478800.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

3 Motor Mount parts for the 2018 Jaguar Xe come from DEA / MARMON RIDE CONTROL.

Listed part numbers: DEA / MARMON RIDE CONTROL A70221, DEA / MARMON RIDE CONTROL A70232 and DEA / MARMON RIDE CONTROL A70234.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

8 Oil parts for the 2018 Jaguar Xe come from 3 brands — LIQUI MOLY, PENTOSIN and VALVOLINE. The "Popular" part is LIQUI MOLY 22044.

This group includes LIQUI MOLY 22044, LIQUI MOLY 22046 and LIQUI MOLY 20408 and the remaining parts above.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

3 Oil Cooler parts for the 2018 Jaguar Xe come from 3 brands — NISSENS, SKP and ÜRO PARTS.

Part numbers include NISSENS 90944, SKP SK90944 and ÜRO PARTS LR010754.

This table covers the Oil Cooler Hose pipes. Read more

This group shows a single part: REIN CHU1020.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2018 Jaguar Xe come from 3 brands — DORMAN, AGS and SKP. The "Popular" part is AGS ODP00007.

Part numbers include AGS ODP00007, DORMAN 090053 and AGS ODP00012, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2018 Jaguar Xe — AJUSA 01115300.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts for the 2018 Jaguar Xe come from 3 brands — CALORSTAT, MOTORAD and SKP.

Part numbers include CALORSTAT OC2325, MOTORAD MO119 and SKP SKMO119.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts for the 2018 Jaguar Xe come from 16 brands — WIX, ACDELCO, CHAMP / LUBER-FINER and 13 other brands. The "Popular" part is ACDELCO PF659.

The Economy section lists 5 options from CHAMP / LUBER-FINER, FVP, PRO-TEC and 2 other brands — the catalog's value-priced group. CHAMP / LUBER-FINER P986 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1C353A is listed in this group.

In the Standard Replacement grade, ACDELCO, MANN, VARIOUS MFR and 7 other brands supply 11 parts: built to original-equipment specification. A representative part number is ACDELCO PF659.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2018 Jaguar Xe — MAHLE / CLEVITE B33731.

This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

2 Oil Level Sensor parts for the 2018 Jaguar Xe come from 2 brands — HELLA and WELLS.

Listed part numbers: HELLA 013680161 and WELLS 5S12476.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the Supercharger pressure sensors. Typical signs include a check-engine light for MAP or fuel-rail pressure, or a limp mode under load. A vacuum leak or a clogged reference line will fake a bad pressure sensor. Read more

This group shows a single part: WELLS 5S12129.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

This group shows a single part: S.A. GEAR 76405.

This table covers the guides and dampers that keep the timing chain on its path. Read more

One part is listed for the 2018 Jaguar Xe — ÜRO PARTS C2Z28430.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: ÜRO PARTS LR095472.

This table covers the Valve covers. Read more

One part is listed for the 2018 Jaguar Xe — VAICO V410071.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Valve Cover Gasket parts for the 2018 Jaguar Xe come from 3 brands — MAHLE / CLEVITE, AJUSA and APEX. The "Popular" part is AJUSA 56062400.

Part numbers include AJUSA 56062400, MAHLE / CLEVITE VS50891 and AJUSA 56062300, among others listed above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Valve Stem Seal parts for the 2018 Jaguar Xe come from 2 brands — AJUSA and MAHLE / CLEVITE.

Part numbers include AJUSA 57074400, AJUSA 12036300 and MAHLE / CLEVITE SS46145.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: WELLS 2T1298.