1983 Jeep Cherokee Drivetrain Parts

This table covers the 4WD Actuator housings. Read more

This group shows a single part: DORMAN 917500.

This table covers the 4WD Actuator Retaining clips. Read more

This group shows a single part: DANA 621059.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Axle Shaft Seal parts for the 1983 Jeep Cherokee come from 4 brands — SKF, BCA, SCHAEFFLER and 1 other brand. The "Popular" part is SKF 16083. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

Part numbers include SKF 16083, BCA NS2300 and SCHAEFFLER SS2367, among others listed above.

This table covers the carriers that hold the differential gears in the axle. Read more

3 Differential Carrier parts for the 1983 Jeep Cherokee come from 2 brands — DANA and MOTIVE GEAR. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

Part numbers include DANA 706025X, DANA 707115X and MOTIVE GEAR D44LCL.

This table covers the bearings and races that support the differential carrier. Read more

18 Differential Carrier Bearing / Race parts for the 1983 Jeep Cherokee come from 7 brands — SCHAEFFLER, WJB / INMOTION PARTS, SKF and 4 other brands. The "Popular" part is MEVOTECH HLM501349. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

The Economy section lists 5 options from WJB / INMOTION PARTS and MEVOTECH — the catalog's value-priced group. MEVOTECH HLM501349 is listed in this group.

In the Standard Replacement grade, SCHAEFFLER, SKF, BCA and 2 other brands supply 13 parts: built to original-equipment specification. A representative part number is ACDELCO A36.

This table covers the Differential Carrier shims. Read more

MOTIVE GEAR supplies both parts for the 1983 Jeep Cherokee. All of them fit every engine offered in the 1983 Cherokee.

Part numbers include MOTIVE GEAR 1115 and MOTIVE GEAR 1130.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Differential Cover Gasket parts for the 1983 Jeep Cherokee come from 4 brands — MAHLE / CLEVITE, FEL-PRO, VICTOR REINZ and 1 other brand. The "Popular" part is FEL-PRO RDS6629. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

This group includes FEL-PRO RDS6629, VICTOR REINZ 711481100 and MAHLE / CLEVITE P27801 and the remaining parts above.

This table covers the Differential Cross pins. Read more

3 Differential Cross Pin parts are listed for the 1983 Jeep Cherokee, from RICHMOND and MOTIVE GEAR. All of them fit every engine offered in the 1983 Cherokee.

This group includes MOTIVE GEAR 39194, RICHMOND CSPD44 and RICHMOND XL5605.

This table covers the Differential Gear Installation kits. Read more

MOTIVE GEAR supplies both parts for the 1983 Jeep Cherokee. All of them fit every engine offered in the 1983 Cherokee.

Listed part numbers: MOTIVE GEAR D44IK and MOTIVE GEAR AM20IK.

This table covers the bearings and races on the differential pinion. Read more

34 Differential Pinion Bearing / Race parts are listed for the 1983 Jeep Cherokee, from SCHAEFFLER, SKF, WJB / INMOTION PARTS and 5 other brands. FAMOUS BRAND SM802048 carries the "Popular" badge. Grades run from Economy through Standard Replacement; Standard Replacement is the most populated section, led by SCHAEFFLER, SKF, BCA and 2 other brands.

This table covers the baffles that control oil at the pinion bearings. Read more

3 Differential Pinion Bearing Baffle parts are listed for the 1983 Jeep Cherokee, from MOTIVE GEAR and RICHMOND. All of them fit every engine offered in the 1983 Cherokee.

Listed part numbers: MOTIVE GEAR 4105, MOTIVE GEAR 4104 and RICHMOND 0400111.

This table covers the Differential Pinion nuts. Read more

2 Differential Pinion Nut parts for the 1983 Jeep Cherokee come from MOTIVE GEAR. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

Listed part numbers: MOTIVE GEAR 30185 and MOTIVE GEAR 379570S.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

3 Differential Pinion Repair Sleeve parts for the 1983 Jeep Cherokee come from 3 brands — NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

Part numbers include NATIONAL 99193, SCHAEFFLER SR3481 and WJB / INMOTION PARTS WS99155.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Differential Pinion Seal parts for the 1983 Jeep Cherokee come from 4 brands — SKF, BCA, SCHAEFFLER and 1 other brand. The "Popular" part is SKF 15788. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

This group includes SKF 15788, WJB / INMOTION PARTS WS5778 and BCA NS5778 and the remaining parts above.

This table covers the Differential Pinion Shaft Lock bolts. Read more

One part is listed for the 1983 Jeep Cherokee — MOTIVE GEAR 305105S.

This table covers the Differential Pinion shims. Read more

5 Differential Pinion Shim parts for the 1983 Jeep Cherokee come from 2 brands — MOTIVE GEAR and RICHMOND. The "Popular" part is MOTIVE GEAR 1114. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

Part numbers include MOTIVE GEAR 1114, MOTIVE GEAR 1113 and MOTIVE GEAR 1104, among others listed above.

This table covers kits that group the bearings, races and seals for a differential rebuild. Read more

31 Differential Rebuild Kit parts are listed for the 1983 Jeep Cherokee, from MOTIVE GEAR, BCA, RICHMOND and 6 other brands. RICHMOND XL10541 carries the "Popular" badge. Master Kit and Standard Kit are all represented, and Master Kit alone accounts for 17 parts.

This table covers the ring-and-pinion gear sets that set the axle ratio. Read more

6 Differential Ring and Pinion parts for the 1983 Jeep Cherokee come from 3 brands — MOTIVE GEAR, DORMAN and RICHMOND. The "Popular" part is DORMAN 697340. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

The Economy section: 2 options from DORMAN and RICHMOND. DORMAN 697340 is listed in this group.

Standard Replacement: 4 parts, from MOTIVE GEAR. A representative part number is MOTIVE GEAR D44.

This group includes DORMAN 697340, RICHMOND D44RUB and MOTIVE GEAR D44 and the remaining parts above.

This table covers the Differential Ring Gear bolts. Read more

2 Differential Ring Gear Bolt parts for the 1983 Jeep Cherokee come from MOTIVE GEAR. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

Part numbers include MOTIVE GEAR RGBT004 and MOTIVE GEAR D8OZ4216B.

This table covers the Differential Spider gears. Read more

This group shows a single part: RICHMOND XL4070.

This table covers the spools that lock the differential side gears together. Read more

5 Differential Spool parts are listed for the 1983 Jeep Cherokee, from RICHMOND and MOTIVE GEAR. RICHMOND XL5105 carries the "Popular" badge. All of them fit every engine offered in the 1983 Cherokee.

Part numbers include RICHMOND XL5105, MOTIVE GEAR MSD4430 and MOTIVE GEAR FSD4430, among others listed above.

This table covers the Differential washers. Read more

3 Differential Washer parts for the 1983 Jeep Cherokee come from MOTIVE GEAR. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

Listed part numbers: MOTIVE GEAR C9OZ4230A, MOTIVE GEAR C9OZ4228A and MOTIVE GEAR RGB5LW.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

10 Drive Shaft parts are listed for the 1983 Jeep Cherokee, from TRAKMOTIVE, DORMAN, WJB / INMOTION PARTS and 1 other brand. DORMAN 938233 carries the "Popular" badge. 3 parts fit every engine; the other 7 are engine-specific.

This table covers the Drive Shaft End yokes. Read more

This group shows a single part: MOTIVE GEAR MG1350D44.

This table covers the seals at the Drive Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: DANA 620257.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

4 Gear Oil parts for the 1983 Jeep Cherokee come from 2 brands — LUCAS OIL and MOBIL. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

The SAE 75W-90 section lists 1 option from MOBIL — grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. MOBIL 104361 is listed in this group.

The SAE 80W-90 section lists 3 options from LUCAS OIL — grouped under the catalog's "SAE 80W-90" designation — the notes column spells out what sets them apart. LUCAS OIL 10043 is listed in this group.

This group includes MOBIL 104361, LUCAS OIL 10043 and LUCAS OIL 10046 and the remaining parts above.

This table covers the Gear Oil additives. Read more

This group shows a single part: USA STANDARD GEAR USA15018.

This table covers the gaskets that seal the Power Take Off (PTO). Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Power Take Off (PTO) Gasket parts are listed for the 1983 Jeep Cherokee, from MAHLE / CLEVITE and VICTOR REINZ. MAHLE / CLEVITE H36080 carries the "Popular" badge. All of them fit every engine offered in the 1983 Cherokee.

Part numbers include MAHLE / CLEVITE H36080, MAHLE / CLEVITE H26206 and MAHLE / CLEVITE H26205, among others listed above.

This table covers the seals at the Transfer Case Adapter. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Adapter Seal parts for the 1983 Jeep Cherokee come from 2 brands — ATP and PIONEER. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

This group includes ATP TO38 and PIONEER 759104.

This table covers the chains that drive the transfer case. Read more

One part is listed for the 1983 Jeep Cherokee — USA STANDARD GEAR ZTCHHV025.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

3 Transfer Case Fluid parts for the 1983 Jeep Cherokee come from MOBIL. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

The Dexron section lists 1 option from MOBIL — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. MOBIL 123130 is listed in this group.

The Multi-Vehicle section lists 2 options from MOBIL — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. MOBIL 126505 is listed in this group.

Listed part numbers: MOBIL 123130, MOBIL 126505 and MOBIL 112980.

This table covers the gaskets that seal the Transfer Case. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

USA STANDARD GEAR supplies both parts for the 1983 Jeep Cherokee. All of them fit every engine offered in the 1983 Cherokee.

Listed part numbers: USA STANDARD GEAR ZTGASTC203012 and USA STANDARD GEAR ZTTSK208.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Transfer Case Input Shaft Bearing parts for the 1983 Jeep Cherokee come from 5 brands — BCA, NATIONAL, SKF and 2 other brands. The "Popular" part is BCA NBB5020. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

Part numbers include BCA NBB5020 and NATIONAL B5020, among others listed above.

This table covers the Transfer Case Input Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Transfer Case Input Shaft Pilot Bearing parts for the 1983 Jeep Cherokee come from 4 brands — BCA, NATIONAL, TIMKEN and 1 other brand. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

Part numbers include BCA NBB2012 and NATIONAL B2012, among others listed above.