1983 Jeep Cherokee Automatic Transmission Parts

This table covers the apply bands inside the automatic transmission. Read more

7 Band parts are listed for the 1983 Jeep Cherokee, from PIONEER, ATP and BORG-WARNER. BORG-WARNER 16355BW carries the "Popular" badge. All of them fit every engine offered in the 1983 Cherokee.

Part numbers include BORG-WARNER 16355BW, PIONEER 767024 and ATP TX40, among others listed above.

This table covers the bushings in this assembly. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

5 Bushing parts for the 1983 Jeep Cherokee come from 2 brands — ATP and PIONEER. The "Popular" part is PIONEER 755192. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

Listed part numbers: PIONEER 755192, ATP TB9 and ATP TB22, plus the other parts above.

This table covers the Bushing kits. Read more

This group shows a single part: ATP TBS2.

This table covers the seals at the Clutch Pack Piston Dam. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Clutch Pack Piston Dam / Seal parts are listed for the 1983 Jeep Cherokee, from PIONEER and ATP. PIONEER 758012 carries the "Popular" badge. All of them fit every engine offered in the 1983 Cherokee.

Part numbers include PIONEER 758012, PIONEER 758013 and ATP TO18, among others listed above.

This table covers the Clutch plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

PIONEER supplies the 5 Clutch Plate parts for the 1983 Jeep Cherokee. PIONEER 766033 carries the "Popular" badge. All of them fit every engine offered in the 1983 Cherokee.

In the Friction grade, PIONEER supplies 3 parts: grouped under the catalog's "Friction" designation — the notes column spells out what sets them apart. A representative part number is PIONEER 766033.

The Steel section lists 2 options from PIONEER — grouped under the catalog's "Steel" designation — the notes column spells out what sets them apart. PIONEER 766234 is listed in this group.

Part numbers include PIONEER 766033, PIONEER 766034 and PIONEER 766036, among others listed above.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

2 Clutch Plate Pack parts for the 1983 Jeep Cherokee come from RAYBESTOS POWERTRAIN. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

This group includes RAYBESTOS POWERTRAIN RCP96034 and RAYBESTOS POWERTRAIN RCPBP10.

This table covers the Extension Housing bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: TIMKEN 207XLO.

This table covers the Extension Housing bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

5 Extension Housing Bushing parts for the 1983 Jeep Cherokee come from 3 brands — ATP, PIONEER and DURA-BOND. The "Popular" part is ATP TB15. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

Part numbers include ATP TB15, ATP TB12 and DURA-BOND RP6189T, among others listed above.

This table covers the gaskets that seal the Extension Housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Extension Housing Gasket parts are listed for the 1983 Jeep Cherokee, from ATP and PIONEER. All of them fit every engine offered in the 1983 Cherokee.

Listed part numbers: ATP TG15 and PIONEER 749052.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Extension Housing Seal parts are listed for the 1983 Jeep Cherokee, from TIMKEN, NATIONAL, BCA and 1 other brand. NATIONAL 710928 carries the "Popular" badge. All of them fit every engine offered in the 1983 Cherokee.

Part numbers include NATIONAL 710928, BCA NS710928 and TIMKEN 7300S, among others listed above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

10 Filter parts for the 1983 Jeep Cherokee come from 6 brands — ATP, VARIOUS MFR, ACDELCO and 3 other brands. The "Popular" part is ACDELCO TF247. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

The Economy section lists 2 options from ATP and VARIOUS MFR — the catalog's value-priced group. ATP TF42 is listed in this group.

In the Standard Replacement grade, ATP, ACDELCO, WIX and 2 other brands supply 8 parts: built to original-equipment specification. A representative part number is ACDELCO TF247.

This table covers the flexplates that connect the crankshaft to the torque converter. Read more

5 Flexplate parts are listed for the 1983 Jeep Cherokee, from ATP, PIONEER and DORMAN. ATP Z101 carries the "Popular" badge. 3 parts fit every engine; the other 2 are engine-specific.

The Daily Driver section lists 4 options from ATP and PIONEER — grouped for everyday commuting duty. ATP Z101 is listed in this group.

Economy: 1 part, from DORMAN. A representative part number is DORMAN 04302.

Listed part numbers: ATP Z101, ATP Z102 and PIONEER FRA108, plus the other parts above.

This table covers the heat exchangers that cool transmission fluid. Typical signs include fluid that overheats, a leak at the cooler fittings, or milky fluid that says coolant and ATF have mixed. Flush the lines when you replace a cooler. Cross-contamination is how a small leak becomes a transmission job. Read more

This group shows a single part: GPD 2611405.

This table covers the pans that hold automatic-transmission fluid. Read more

One part is listed for the 1983 Jeep Cherokee — ATP 103019.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Fluid Pan Gasket parts for the 1983 Jeep Cherokee come from 5 brands — MAHLE / CLEVITE, ATP, PIONEER and 2 other brands. The "Popular" part is FEL-PRO TOS18583. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

Part numbers include FEL-PRO TOS18583, MAHLE / CLEVITE W39003TC and ATP TG10, among others listed above.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

5 Fluid Pump Bushing parts for the 1983 Jeep Cherokee come from 3 brands — DURA-BOND, ATP and PIONEER. The "Popular" part is DURA-BOND 01998TG. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

Part numbers include DURA-BOND 01998TG, ATP TB11 and DURA-BOND DOT21T, among others listed above.

This table covers the gaskets that seal the Fluid Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Fluid Pump Gasket parts are listed for the 1983 Jeep Cherokee, from ATP and PIONEER. All of them fit every engine offered in the 1983 Cherokee.

This group includes ATP TG5, ATP TG11 and PIONEER 749071 and the remaining parts above.

This table covers the Fluid Pump O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

4 Fluid Pump O-Ring parts for the 1983 Jeep Cherokee come from 2 brands — ATP and PIONEER. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

Listed part numbers: ATP TO7, ATP TG6 and PIONEER 760015, plus the other parts above.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

3 Fluid Pump Repair Sleeve parts are listed for the 1983 Jeep Cherokee, from BCA, NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 1983 Cherokee.

This group includes BCA NS88187, NATIONAL 99187 and WJB / INMOTION PARTS WS99187.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Fluid Pump Seal parts are listed for the 1983 Jeep Cherokee, from ATP, NATIONAL, BCA and 3 other brands. ATP TO8 carries the "Popular" badge. All of them fit every engine offered in the 1983 Cherokee.

This table covers the seals at the Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Input Shaft Seal parts are listed for the 1983 Jeep Cherokee, from ATP and PIONEER. All of them fit every engine offered in the 1983 Cherokee.

Listed part numbers: ATP TR14, ATP TR17 and PIONEER 761025, plus the other parts above.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Manual Shaft Seal parts are listed for the 1983 Jeep Cherokee, from BCA, NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 1983 Cherokee.

Part numbers include BCA NS8609, NATIONAL 8609 and WJB / INMOTION PARTS WS8609.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Output Shaft Seal parts for the 1983 Jeep Cherokee come from 2 brands — SCHAEFFLER and SKF. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

Listed part numbers: SCHAEFFLER SS2606 and SKF 19244.

This table covers the rebuild kits for this assembly. Read more

11 Rebuild Kit parts are listed for the 1983 Jeep Cherokee, from PIONEER and ATP. PIONEER 753036 carries the "Popular" badge. All of them fit every engine offered in the 1983 Cherokee.

In the Deluxe Kit (Master Kit + Filter, Band & Common Bushings) grade, PIONEER supplies 2 parts: grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. A representative part number is PIONEER 753036.

The Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) section lists 5 options from ATP and PIONEER — grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. ATP TMS14 is listed in this group.

In the Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) grade, PIONEER and ATP supply 4 parts: grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. A representative part number is ATP TGS23.

This table covers the wear sleeves used to restore a grooved seal surface. Read more

One part is listed for the 1983 Jeep Cherokee — SKF 99193.

This table covers the seals at the Servo Piston. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Servo Piston Seal parts are listed for the 1983 Jeep Cherokee, from ATP and PIONEER. All of them fit every engine offered in the 1983 Cherokee.

This group includes ATP TO11 and PIONEER 762012.

This table covers the Shift Improvement kits. Read more

6 Shift Improvement Kit parts for the 1983 Jeep Cherokee come from 3 brands — TRANSGO, PIONEER and ATP. The "Popular" part is TRANSGO SKTFSC. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

Daily Driver: 2 parts, from TRANSGO and PIONEER. A representative part number is TRANSGO SKTFSC.

In the Heavy Duty grade, ATP supplies 1 part: rated for severe service. A representative part number is ATP TK2.

The High Performance section lists 3 options from TRANSGO — engineered beyond original-equipment specification. TRANSGO TF2 is listed in this group.

This group includes TRANSGO SKTFSC, PIONEER 765011 and ATP TK2 and the remaining parts above.

This table covers the Shift Linkage bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1983 Jeep Cherokee — ATP TO41.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Shift Shaft Seal parts are listed for the 1983 Jeep Cherokee, from ATP, PIONEER and SCHAEFFLER. All of them fit every engine offered in the 1983 Cherokee.

Listed part numbers: ATP TO15, PIONEER 759037 and SCHAEFFLER SS2178.

This table covers the Stator Support Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Stator Support Shaft Bushing parts for the 1983 Jeep Cherokee come from 2 brands — ATP and PIONEER. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

This group includes ATP TB19 and PIONEER 755109.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

4 Torque Converter parts for the 1983 Jeep Cherokee come from TC REMANUFACTURING.

This group includes TC REMANUFACTURING R26, TC REMANUFACTURING R30 and TC REMANUFACTURING R28 and the remaining parts above.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

2 Torque Converter Repair Sleeve parts are listed for the 1983 Jeep Cherokee, from SCHAEFFLER and TIMKEN. All of them fit every engine offered in the 1983 Cherokee.

Part numbers include SCHAEFFLER SR3477 and TIMKEN KWK99187.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1983 Jeep Cherokee — TIMKEN 331227H.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

6 Transmission Fluid parts for the 1983 Jeep Cherokee come from 2 brands — MOBIL and VALVOLINE. The "Popular" part is MOBIL 126505. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

The Dexron section lists 1 option from MOBIL — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. MOBIL 123130 is listed in this group.

The Multi-Vehicle section lists 5 options from VALVOLINE and MOBIL — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. MOBIL 126505 is listed in this group.

Listed part numbers: MOBIL 126505, MOBIL 123130 and VALVOLINE VV3246, plus the other parts above.

This table covers the conditioners and additives used with this transmission fluid. Read more

7 Transmission Fluid Additive parts for the 1983 Jeep Cherokee come from 2 brands — LUBEGARD and ATP. The "Popular" part is LUBEGARD 19610. Every part fits both the 4.2L 258cid L6 and the 5.9L 360cid V8.

Part numbers include LUBEGARD 19610, LUBEGARD 60902 and ATP AT202, among others listed above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Transmission Mount parts are listed for the 1983 Jeep Cherokee, from DEA / MARMON RIDE CONTROL, SKP, ANCHOR and 2 other brands. ANCHOR 2693 carries the "Popular" badge. All of them fit every engine offered in the 1983 Cherokee.

Economy: 1 part, from SKP. A representative part number is SKP SKM2693.

The Standard Replacement section: 5 options from DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 1 other brand. ANCHOR 2693 is listed in this group.

This group includes ANCHOR 2693, SKP SKM2693 and DEA / MARMON RIDE CONTROL A2268 and the remaining parts above.