819 Engine parts are listed for the 2005 Jeep Liberty, in 91 part types, covering all 3 engine options (2.4L L4, 2.8L L4 DIESEL Turbocharged and 3.7L V6). Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2005 Jeep Liberty, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Crankshaft Seal (45 parts), Oil Filter (42 parts) and Oil (34 parts). The other 88 part types cover the remaining 698 parts.
The 2005 Jeep Liberty was sold with 3 engines. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
75 brands supply engine parts for the 2005 Jeep Liberty, led by ENGINETECH (81 parts), MOPAR (65 parts) and MAHLE / CLEVITE (57 parts), plus 72 more brands. Quality grades include Standard Replacement, Economy and Premium.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2005 Jeep Liberty. 158 parts have it, including CLOYES 94191 (Balance Shaft Chain) and MELLING BG297 (Balance Shaft Chain Guide). Each part number opens a page with every vehicle that part fits.
Auxiliary Shaft Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 3.7L V6 | SH1997S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Set | View on Amazon |
This table covers the Auxiliary Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
This group shows a single part: MAHLE / CLEVITE SH1997S.
Balance Shaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 3.7L V6 | 53020818 | 🇺🇸 US 🇨🇦 CA | Includes Shaft, Gear, Pin, Bolt, and Plate | View on Amazon |
| MOPAR Fits: 3.7L V6 | 53021298AB | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
This table covers the Balance shafts.
2 Balance Shaft parts for the 2005 Jeep Liberty come from MOPAR.
This group includes MOPAR 53020818 and MOPAR 53021298AB.
Balance Shaft Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.7L V6 | CC485 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Balance Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
This group shows a single part: ENGINETECH CC485.
Balance Shaft Chain
Chain Only
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 2.4L L4 | 94191 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| INA Fits: 2.4L L4 | ZC94191 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 2.4L L4 | 201 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 2.4L L4 | C4150 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 2.4L L4 | 2SR60 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 2.4L L4 | 76194 | 🇺🇸 US 🇨🇦 CA | Includes 2 Balance Shaft Sprockets, Chain, Guide, Tensioner | View on Amazon |
Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 2.4L L4 | 94191SA | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 2.4L L4 | TS14151A | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
This table covers the chains that drive the balance shafts.
8 Balance Shaft Chain parts are listed for the 2005 Jeep Liberty, from CLOYES, PREFERRED COMPONENTS INC, S.A. GEAR and 2 other brands. CLOYES 94191 carries the "Popular" badge.
The Chain Only section lists 6 options from S.A. GEAR, CLOYES, INA and 2 other brands — grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. CLOYES 94191 is listed in this group.
In the Kit grade, CLOYES and PREFERRED COMPONENTS INC supply 2 parts: grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. A representative part number is CLOYES 94191SA.
Part numbers include CLOYES 94191, INA ZC94191 and MELLING 201, among others listed above.
Balance Shaft Chain Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 2.4L L4 | BG297 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 2.4L L4 | 95297 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| INA Fits: 2.4L L4 | ZG95297 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 2.4L L4 | R75297 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 2.4L L4 | 7297 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the guides that keep the balance-shaft chain on its path.
5 Balance Shaft Chain Guide parts are listed for the 2005 Jeep Liberty, from MELLING, CLOYES, INA and 2 other brands. MELLING BG297 carries the "Popular" badge.
Part numbers include MELLING BG297, CLOYES 95297 and INA ZG95297, among others listed above.
Balance Shaft Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | 95298 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FVP Fits: 2.4L L4 | 95298 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 2.4L L4 | T65298A | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 2.4L L4 | 9298 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
4 Balance Shaft Chain Tensioner parts for the 2005 Jeep Liberty come from 4 brands — CLOYES, FVP, PREFERRED COMPONENTS INC and 1 other brand.
Part numbers include CLOYES 95298 and PREFERRED COMPONENTS INC T65298A, among others listed above.
Balance Shaft Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PREFERRED COMPONENTS INC Popular Fits: 2.4L L4 | G55642 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 2.4L L4 | S642 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| INA Fits: 2.4L L4 | ZSS642 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.7L V6 | G57017 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 3.7L V6 | G57018 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| S.A. GEAR Fits: 2.4L L4 | S803 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| S.A. GEAR Fits: 2.4L L4 | S642 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
This table covers the Balance Shaft sprockets.
7 Balance Shaft Sprocket parts are listed for the 2005 Jeep Liberty, from PREFERRED COMPONENTS INC, S.A. GEAR, CLOYES and 1 other brand. PREFERRED COMPONENTS INC G55642 carries the "Popular" badge.
Part numbers include PREFERRED COMPONENTS INC G55642, CLOYES S642 and INA ZSS642, among others listed above.
Camshaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 3.7L V6 | SKES1892 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| SKP Popular Fits: 3.7L V6 | SKES1893 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | ES1892 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | ES1893 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| MELLING Fits: 3.7L V6 | MC1400L | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LeftUpgraded Billet Steel Material | View on Amazon |
| MELLING Fits: 3.7L V6 | MC1400R | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightUpgraded Billet Steel Material | View on Amazon |
| MOPAR Fits: 2.4L L4 | 4781679AB | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| MOPAR Fits: 2.4L L4 | 4781681AB | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
| SKP Fits: 2.4L L4 | SKES0353 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
| SKP Fits: 2.4L L4 | SKES0354 | 🇺🇸 US 🇨🇦 CA | Exhaustwith Federal Emissions System | View on Amazon |
This table covers the camshafts that open the valves.
10 Camshaft parts are listed for the 2005 Jeep Liberty, from SKP, ENGINETECH, MELLING and 1 other brand. SKP SKES1892 carries the "Popular" badge.
Camshaft Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: 3.7L V6 | CS2101BB | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bi-Metal (Babbitt) | View on Amazon |
This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
One part is listed for the 2005 Jeep Liberty — KING ENGINE BEARINGS CS2101BB.
Camshaft Dowel Pin
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 2.4L L4 | 6100997 | 🇺🇸 US 🇨🇦 CA | [M4x14]Camshaft Sprocket | View on Amazon |
This table covers the Camshaft Dowel pins.
One part is listed for the 2005 Jeep Liberty — MOPAR 6100997.
Camshaft Hardware Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.7L V6 | HK121 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Cylinder Head Access PlugReplaces OE 53021031 | View on Amazon |
This table covers the Camshaft hardware kits.
One part is listed for the 2005 Jeep Liberty — ENGINETECH HK121.
Camshaft Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.7L V6 | 555076 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Nominal Dia.: 2-9/64"SCMetric Dia. | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | B32890 | 🇺🇸 US 🇨🇦 CA | Plastic | View on Amazon |
| MOPAR Fits: 2.4L L4 | 4667731 | 🇺🇸 US 🇨🇦 CA | Fits CYLINDER HEAD | View on Amazon |
| MOPAR Fits: 2.4L L4 | 4667731AB | 🇺🇸 US 🇨🇦 CA | CYLINDER HEAD | View on Amazon |
This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
4 Camshaft Plug parts are listed for the 2005 Jeep Liberty, from MOPAR, DORMAN and MAHLE / CLEVITE.
Part numbers include DORMAN 555076, MAHLE / CLEVITE B32890 and MOPAR 4667731, among others listed above.
Camshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 2.4L L4, 3.7L V6 | NS99139 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| NATIONAL Fits: 2.4L L4 | 99139 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WJB / INMOTION PARTS Fits: 2.4L L4 | WS99139 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the wear sleeves used to restore a Camshaft seal surface.
3 Camshaft Repair Sleeve parts for the 2005 Jeep Liberty come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.
Listed part numbers: BCA NS99139, NATIONAL 99139 and WJB / INMOTION PARTS WS99139.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 2.4L L4 | TCS45961 | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
| NATIONAL Popular Fits: 2.4L L4 | 320249 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKF Popular Fits: 2.4L L4 | 13709 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| AJUSA Fits: 2.4L L4 | 15012600 | 🇺🇸 US 🇨🇦 CA | 35 X 48 X 7Clockwise | View on Amazon |
| APEX Fits: 2.4L L4 | ATC11030 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| BCA Fits: 2.4L L4 | NS320249 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CONTINENTAL Fits: 2.4L L4 | CS13709 | 🇺🇸 US 🇨🇦 CA | Front35x48x7mm | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | 48392 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| MOPAR Fits: 2.4L L4 | 4777086 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| SCHAEFFLER Fits: 2.4L L4 | SS2412 | 🇺🇸 US 🇨🇦 CA | DOHC7 MM Width | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 811051700 | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 812490910 | 🇺🇸 US 🇨🇦 CA | Material: Molded Rubber and Metal | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.4L L4 | WS320249 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
13 Camshaft Seal parts for the 2005 Jeep Liberty come from 12 brands — VICTOR REINZ, FEL-PRO, NATIONAL and 9 other brands. The "Popular" part is FEL-PRO TCS45961.
Circular / Semi-Circular Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Fits: 2.4L L4 | ACP204 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FEL-PRO Fits: 2.4L L4 | ES72357 | 🇺🇸 US 🇨🇦 CA | RearValve Cover Camshaft Bore Plug | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 711382500 | 🇺🇸 US 🇨🇦 CA | Valve Cover | View on Amazon |
This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
3 Circular / Semi-Circular Plug parts for the 2005 Jeep Liberty come from 3 brands — APEX, FEL-PRO and VICTOR REINZ.
This group includes APEX ACP204, FEL-PRO ES72357 and VICTOR REINZ 711382500.
Connecting Rod
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.4L L4 | ECR116 | 🇺🇸 US 🇨🇦 CA | Reconditioned | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | ECR111 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ReconditionedContains New TY bolts | View on Amazon |
| TOPLINE Fits: 2.4L L4 | CRC28 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the connecting rods between each piston and the crankshaft.
3 Connecting Rod parts are listed for the 2005 Jeep Liberty, from ENGINETECH and TOPLINE.
This group includes ENGINETECH ECR116, ENGINETECH ECR111 and TOPLINE CRC28.
Connecting Rod Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 2.4L L4 | CB1813H | 🇺🇸 US 🇨🇦 CA | High PerformanceH Series (Tri-Metal) | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.4L L4 | BB308J | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 2.4L L4 | CB1813A | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Pair | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 2.4L L4 | CB1813A4 | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Set | View on Amazon |
| ENGINETECH Fits: 2.4L L4 | BB327J | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| KING ENGINE BEARINGS Fits: 2.4L L4 | CR4256AM | 🇺🇸 US 🇨🇦 CA | SetBimetal (Aluminum Base) | View on Amazon |
| KING ENGINE BEARINGS Fits: 2.4L L4 | CR4271AM | 🇺🇸 US 🇨🇦 CA | SetBimetal (Aluminum Base) | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | CB1813P | 🇺🇸 US 🇨🇦 CA | P Series (Tri-Metal)Pair | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | CB1817A | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Pair | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | CB1817A4 | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Set | View on Amazon |
| SEALED POWER Fits: 2.4L L4 | 4565AA | 🇺🇸 US 🇨🇦 CA | A-Series aluminum bearings | View on Amazon |
| TOPLINE Fits: 2.4L L4 | RBC28 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| TOPLINE Fits: 2.4L L4 | RBC28S | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.7L V6 | BB123J | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.7L V6 | CB1818A6 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | A Series (Aluminum)Set | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | BB219J | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| KING ENGINE BEARINGS Fits: 3.7L V6 | CR6822SI | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | BI-Metal (aluminum silicon base)Set | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | CB1818A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | A Series (Aluminum)Pair | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | CB1819A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | A Series (Aluminum)Pair | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | CB1819A6 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | A Series (Aluminum)Set | View on Amazon |
| SEALED POWER Fits: 3.7L V6 | 64840A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetA-Series aluminum bearings | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
21 Connecting Rod Bearing parts are listed for the 2005 Jeep Liberty, from MAHLE / CLEVITE, ENGINETECH, KING ENGINE BEARINGS and 2 other brands. ENGINETECH BB308J carries the "Popular" badge.
In the High Performance grade, MAHLE / CLEVITE supplies 1 part: engineered beyond original-equipment specification. A representative part number is MAHLE / CLEVITE CB1813H.
The Standard Replacement section lists 12 options from MAHLE / CLEVITE, ENGINETECH, KING ENGINE BEARINGS and 2 other brands — built to original-equipment specification. ENGINETECH BB308J is listed in this group.
8 ungrouped parts are not assigned to a grade, with the same engine-level match.
Connecting Rod Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 2.4L L4 | 6508307AA | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MOPAR Fits: 3.7L V6 | 6504720 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Connecting Rod bolts.
2 Connecting Rod Bolt parts for the 2005 Jeep Liberty come from MOPAR.
Listed part numbers: MOPAR 6508307AA and MOPAR 6504720.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.4L L4 | CR148CSB | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINETECH Popular Fits: 3.7L V6 | CR226CSB | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Oil Pan Gasket not Included | View on Amazon |
| FEL-PRO Popular Fits: 2.4L L4 | CS9924 | 🇺🇸 US 🇨🇦 CA | Permadry Rubber Oil Pan Gasket(s) Included | View on Amazon |
| ULTRA-POWER Popular Fits: 3.7L V6 | CS26229 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber Oil Pan Gasket(s) Included | View on Amazon |
| AJUSA Fits: 2.4L L4 | 54146400 | 🇺🇸 US 🇨🇦 CA | Engine EDO | View on Amazon |
| AJUSA Fits: 3.7L V6 | 54287900 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| APEX Fits: 2.4L L4 | ACS11008 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 3.7L V6 | ACS2074 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ENGINE PRO Fits: 2.4L L4 | 379924 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINE PRO Fits: 3.7L V6 | 3726229 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FEL-PRO Fits: 3.7L V6 | CS26229 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Permadry Rubber Oil Pan Gasket(s) Included | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | CS54044A | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.7L V6 | CS54250 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| SKP Fits: 3.7L V6 | SKCS26229 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| TOPLINE Fits: 2.4L L4 | CBSC28 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 3.7L V6 | 081006601 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
16 Conversion / Lower Gasket Set parts are listed for the 2005 Jeep Liberty, from ENGINETECH, FEL-PRO, AJUSA and 7 other brands. ENGINETECH CR148CSB carries the "Popular" badge.
Crankshaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.7L V6 | 253600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Connecting Rod Bearings & Crankshaft Main BearingsReman | View on Amazon |
| MOPAR Fits: 2.4L L4 | 4781643AA | 🇺🇸 US 🇨🇦 CA | Reman. | View on Amazon |
| MOPAR Fits: 3.7L V6 | 53020959AB | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the crankshafts that turn piston motion into rotation.
3 Crankshaft parts are listed for the 2005 Jeep Liberty, from MOPAR and ENGINETECH.
Listed part numbers: ENGINETECH 253600, MOPAR 4781643AA and MOPAR 53020959AB.
Crankshaft Main Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: 2.4L L4 | MB5270XP | 🇺🇸 US 🇨🇦 CA | SetRace bearings, Trimetal [Pmax Black] | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.4L L4 | BC410J | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| KING ENGINE BEARINGS Fits: 2.4L L4 | MB5270AM | 🇺🇸 US 🇨🇦 CA | SetBimetal (Aluminum Base) | View on Amazon |
| SEALED POWER Fits: 2.4L L4 | 7313M | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| TOPLINE Fits: 2.4L L4 | MBC28 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.7L V6 | BC200J | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| KING ENGINE BEARINGS Fits: 3.7L V6 | MB4102SI | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | BI-Metal (aluminum silicon base)Set | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | MS2244A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | A Series (Aluminum)Set | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | MS2286A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | A Series (Aluminum)Set | View on Amazon |
| SEALED POWER Fits: 3.7L V6 | 7386MA | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetA-Series aluminum bearings | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
10 Crankshaft Main Bearing parts for the 2005 Jeep Liberty come from 5 brands — KING ENGINE BEARINGS, ENGINETECH, SEALED POWER and 2 other brands. The "Popular" part is ENGINETECH BC410J.
The High Performance section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5270XP is listed in this group.
Standard Replacement: 4 parts, from ENGINETECH, KING ENGINE BEARINGS, SEALED POWER and 1 other brand. A representative part number is ENGINETECH BC410J.
5 further parts sit outside the graded sections, with the same engine-level match.
Crankshaft Main Bearing Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ Fits: 3.7L V6 | 711347800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | CRANKSHAFT | View on Amazon |
This table covers the wear sleeves used to restore a Crankshaft Main Bearing seal surface.
One part is listed for the 2005 Jeep Liberty — VICTOR REINZ 711347800.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: 2.4L L4 | 99128 | 🇺🇸 US 🇨🇦 CA | Front0.315 IN Width | View on Amazon |
| SCHAEFFLER Popular Fits: 3.7L V6 | SR3501 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| WJB / INMOTION PARTS Popular Fits: 3.7L V6 | WS99181 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| ENGINETECH Fits: 2.4L L4 | SS342 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FEL-PRO Fits: 3.7L V6 | 16230 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearUse with Installation tool | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | A358 | 🇺🇸 US 🇨🇦 CA | Steel | View on Amazon |
| NATIONAL Fits: 3.7L V6 | 99181 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| SCHAEFFLER Fits: 3.7L V6 | SR3567 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear15.88 mm Width | View on Amazon |
| TIMKEN Fits: 2.4L L4 | KWK99360 | 🇺🇸 US 🇨🇦 CA | Kwik-Sleeve | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.4L L4 | WS99128 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.7L V6 | WS99393 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
11 Crankshaft Repair Sleeve parts for the 2005 Jeep Liberty come from 7 brands — WJB / INMOTION PARTS, NATIONAL, SCHAEFFLER and 4 other brands. The "Popular" part is NATIONAL 99128.
Crankshaft Repair Sleeve Tool
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 3.7L V6 | 16328 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| VICTOR REINZ Fits: 3.7L V6 | 711620300 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes.
2 Crankshaft Repair Sleeve Tool parts for the 2005 Jeep Liberty come from 2 brands — FEL-PRO and VICTOR REINZ.
This group includes FEL-PRO 16328 and VICTOR REINZ 711620300.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 2.4L L4 | TCS45962 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| FEL-PRO Popular Fits: 2.4L L4 | BS40182 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| FEL-PRO Popular Fits: 2.4L L4 | BS40627 | 🇺🇸 US 🇨🇦 CA | PTFE RubberIncludes Sleeve | View on Amazon |
| FEL-PRO Popular Fits: 3.7L V6 | BS40186 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.7L V6 | JV1659 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Seal OnlySet | View on Amazon |
| MOPAR Popular Fits: 3.7L V6 | 53021313AA | 🇺🇸 US 🇨🇦 CA | Crankshaft Oil Seal | View on Amazon |
| NATIONAL Popular Fits: 2.4L L4 | 320348 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| NATIONAL Popular Fits: 3.7L V6 | 710472 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| TIMKEN Popular Fits: 2.4L L4 | 320348 | 🇺🇸 US 🇨🇦 CA | Material: V-Fluoro-Elastomer | View on Amazon |
| APEX Fits: 2.4L L4 | ATC11031 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| APEX Fits: 2.4L L4 | ABS1103 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| APEX Fits: 3.7L V6 | ABS265 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| BCA Fits: 2.4L L4 | NS320348 | 🇺🇸 US 🇨🇦 CA | Viton | View on Amazon |
| BCA Fits: 2.4L L4 | NS710056 | 🇺🇸 US 🇨🇦 CA | RearViton Type | View on Amazon |
| BCA Fits: 3.7L V6 | NS710472 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| BCA Fits: 3.7L V6 | NS710471 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| DAYCO Fits: 2.4L L4 | SK0003 | 🇺🇸 US 🇨🇦 CA | Includes 2 Camshaft Seals, Crankshaft Seal, Pre-Assembly Seal Lubricant | View on Amazon |
| ENGINETECH Fits: 2.4L L4 | S2629 | 🇺🇸 US 🇨🇦 CA | 1 piece Viton | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | S7632 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 2.4L L4 | JV1654 | 🇺🇸 US 🇨🇦 CA | FluoroelastomerIncludes Seal Only | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | JV5220 | 🇺🇸 US 🇨🇦 CA | Crankshaft Seal KitMolded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | JV1600 | 🇺🇸 US 🇨🇦 CA | Includes Seal and GasketPaper | View on Amazon |
| MOPAR Fits: 3.7L V6 | 53020788AB | 🇺🇸 US 🇨🇦 CA | Crankshaft Oil Seal | View on Amazon |
| NATIONAL Fits: 2.4L L4 | 710056 | 🇺🇸 US 🇨🇦 CA | RearViton Type | View on Amazon |
| NATIONAL Fits: 3.7L V6 | 710471 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| SCHAEFFLER Fits: 3.7L V6 | SS2856 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front1.81" I:D X 2.84" O.D. X 0.33" Width | View on Amazon |
| SCHAEFFLER Fits: 3.7L V6 | SS3410 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear4.74" O.D. X 0.37" Width | View on Amazon |
| SKF Fits: 2.4L L4 | 35828 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| SKF Fits: 3.7L V6 | 39361 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| TIMKEN Fits: 2.4L L4 | 710056 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| TIMKEN Fits: 3.7L V6 | 710472 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.811 in. Shaft Size2.835 in. Bore | View on Amazon |
| TIMKEN Fits: 3.7L V6 | 710471 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| ULTRA-POWER Fits: 3.7L V6 | BS40186 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| ULTRA-POWER Fits: 3.7L V6 | 710472 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 813480500 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 191005601 | 🇺🇸 US 🇨🇦 CA | SetRubber | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 191007901 | 🇺🇸 US 🇨🇦 CA | RubberSet | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 813479800 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 191007501 | 🇺🇸 US 🇨🇦 CA | PTFESet | View on Amazon |
| VICTOR REINZ Fits: 3.7L V6 | 191008201 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.4L L4 | WS320348 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.4L L4 | WS710056 | 🇺🇸 US 🇨🇦 CA | RearViton Type | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.4L L4 | WS5279 | 🇺🇸 US 🇨🇦 CA | PTFE Rubber Material | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.7L V6 | WS710472 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.7L V6 | WS710471 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
45 Crankshaft Seal parts for the 2005 Jeep Liberty come from 14 brands — VICTOR REINZ, WJB / INMOTION PARTS, FEL-PRO and 11 other brands. The "Popular" part is FEL-PRO TCS45962. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.
Cylinder Head
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CYLINDER HEAD EXPRESS Popular Fits: 3.7L V6 | CI213BR | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | New Bare Cylinder Head Casting - No Valves or Springs | View on Amazon |
| CYLINDER HEAD EXPRESS Fits: 3.7L V6 | CI212BL | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | New Bare Cylinder Head Casting - No Valves or Springs | View on Amazon |
| ENGINETECH Fits: 2.4L L4 | CH1078R | 🇺🇸 US 🇨🇦 CA | RemanufacturedIncludes Valves and springs | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | EHCR226L1 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bare (without valves or springs) | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | EHCR226R1 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bare (without valves or springs) | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | CH1001R | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RemanufacturedIncludes valves, springs, camshaft and lifters | View on Amazon |
This table covers the cylinder heads that close the top of the block.
6 Cylinder Head parts for the 2005 Jeep Liberty come from 2 brands — ENGINETECH and CYLINDER HEAD EXPRESS. The "Popular" part is CYLINDER HEAD EXPRESS CI213BR.
Listed part numbers: CYLINDER HEAD EXPRESS CI213BR, CYLINDER HEAD EXPRESS CI212BL and ENGINETECH CH1078R, plus the other parts above.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.4L L4 | HB195 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| ENGINETECH Popular Fits: 3.7L V6 | HB202 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| FEL-PRO Popular Fits: 2.4L L4 | ES71028 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.7L V6 | GS33534 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Steel | View on Amazon |
| AJUSA Fits: 2.4L L4 | 81028400 | 🇺🇸 US 🇨🇦 CA | Engine EDO | View on Amazon |
| APEX Fits: 2.4L L4 | AHB1108 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| APEX Fits: 3.7L V6 | AHB274 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| FEL-PRO Fits: 3.7L V6 | ES711291 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 2.4L L4 | 10000301 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | GS33343 | 🇺🇸 US 🇨🇦 CA | Cylinder Head Bolt KitSet | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | GS33785 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Long & Short BoltsSteel | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | GS33441 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Steel | View on Amazon |
| MOPAR Fits: 2.4L L4 | 6504033 | 🇺🇸 US 🇨🇦 CA | M11X1.50X146.00 | View on Amazon |
| SKP Fits: 2.4L L4 | SK71028 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| SKP Fits: 3.7L V6 | SKAHB274 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 141006001 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ Fits: 3.7L V6 | 141014601 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetContains 4 Pieces | View on Amazon |
| VICTOR REINZ Fits: 3.7L V6 | 141011001 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetContains 12 Pieces | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
18 Cylinder Head Bolt parts are listed for the 2005 Jeep Liberty, from MAHLE / CLEVITE, VICTOR REINZ, ENGINETECH and 6 other brands. ENGINETECH HB195 carries the "Popular" badge.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.7L V6 | HCR226A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi-Layer Steel Gasket | View on Amazon |
| FEL-PRO Popular Fits: 2.4L L4 | 26202PT | 🇺🇸 US 🇨🇦 CA | Permatorquemls Laserweld Technology | View on Amazon |
| FEL-PRO Popular Fits: 3.7L V6 | 26229PT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Perma TorqueMLS | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 2.4L L4 | 54420 | 🇺🇸 US 🇨🇦 CA | Multi-Layered Steel | View on Amazon |
| ULTRA-POWER Popular Fits: 3.7L V6 | 26229PT | 🇺🇸 US 🇨🇦 CA | Head Bolt Replacement RecommendedHead Bolts Not Included | View on Amazon |
| AJUSA Fits: 2.4L L4 | 10157900 | 🇺🇸 US 🇨🇦 CA | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.7L V6 | 10217900 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| APEX Fits: 2.4L L4 | AHG278 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 3.7L V6 | AHG274 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ENGINETECH Fits: 2.4L L4 | HCR24B | 🇺🇸 US 🇨🇦 CA | Multi-Layer Steel | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 2.4L L4 | 0949123 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.7L V6 | 54250A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | 54250B | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| MOPAR Fits: 2.4L L4 | 4884443AD | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MOPAR Fits: 3.7L V6 | 53020989AB | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| SKP Fits: 3.7L V6 | SK26229PT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VICTOR REINZ Fits: 2.4L L4 | 611002800 | 🇺🇸 US 🇨🇦 CA | Improved Design | View on Amazon |
| VICTOR REINZ Fits: 3.7L V6 | 611002000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VICTOR REINZ Fits: 3.7L V6 | 611037600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
19 Cylinder Head Gasket parts are listed for the 2005 Jeep Liberty, from MAHLE / CLEVITE, VICTOR REINZ, ENGINETECH and 7 other brands. ENGINETECH HCR226A carries the "Popular" badge.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 2.4L L4 | AHS2117 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINETECH Popular Fits: 2.4L L4 | CR148HSJ | 🇺🇸 US 🇨🇦 CA | Includes Multi-Layer Steel Head Gasket | View on Amazon |
| ENGINETECH Popular Fits: 3.7L V6 | CR226HSA | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with MLS head gaskets | View on Amazon |
| ENGINETECH Popular Fits: 3.7L V6 | CR226HSB | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi-Layer Steel Head Gaskets | View on Amazon |
| ENGINETECH Popular Fits: 3.7L V6 | CR226HSBWB | 🇺🇸 US | Includes Head Boltswith MLS head gaskets | View on Amazon |
| FEL-PRO Popular Fits: 2.4L L4 | HS26202PT3 | 🇺🇸 US 🇨🇦 CA | Includes Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals | View on Amazon |
| FEL-PRO Popular Fits: 3.7L V6 | HS26229PT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals | View on Amazon |
| FEL-PRO Popular Fits: 3.7L V6 | HS26229PT1 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals | View on Amazon |
| AJUSA Fits: 2.4L L4 | 52258700 | 🇺🇸 US 🇨🇦 CA | Engine EDO | View on Amazon |
| AJUSA Fits: 3.7L V6 | 52544600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Steel Valve Cover | View on Amazon |
| AJUSA Fits: 3.7L V6 | 52544700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Plastic Valve Cover | View on Amazon |
| APEX Fits: 3.7L V6 | AHS2074 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Stamped Steel Valve Covers | View on Amazon |
| APEX Fits: 3.7L V6 | AHS2082 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Plastic Valve Covers | View on Amazon |
| ENGINE PRO Fits: 2.4L L4 | 3626202PT3 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINE PRO Fits: 3.7L V6 | 3626229PT1 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Use with Plastic Valve Covers | View on Amazon |
| ENGINE PRO Fits: 3.7L V6 | 3626229PT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Use with Stamped Steel Valve Covers | View on Amazon |
| ENGINETECH Fits: 2.4L L4 | CR148HSJWB | 🇺🇸 US | Includes Multi-Layer Steel Head Gasket, Head Bolts | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | CR226HSAWB | 🇺🇸 US | Includes Head Boltswith MLS head gaskets | View on Amazon |
| FEL-PRO Fits: 2.4L L4 | HS26202PT3VK | 🇺🇸 US 🇨🇦 CA | Permadry Molded Rubber Valve Cover Gasket(s) IncludedIncludes Head Bolts, Valve Stem Seals | View on Amazon |
| FEL-PRO Fits: 3.7L V6 | HS26229PTVK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Permadry Molded Rubber Valve Cover Gasket(s) IncludedIncludes Head Bolts, Valve Stem Seals | View on Amazon |
| FEL-PRO Fits: 3.7L V6 | HS26229PT1VK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Head Bolts, Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 2.4L L4 | 0919828 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 3.7L V6 | 0916370 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with PLASTIC VALVE COVER GASKETS | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 3.7L V6 | 0916371 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with STAMPED STEEL VALVE COVER GASKETS | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | HS54420F | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | HS54250 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | HS54250A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Valve Stem Seals | View on Amazon |
| SKP Fits: 3.7L V6 | SKHS26229PT1 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Use with Plastic Valve Covers | View on Amazon |
| TOPLINE Fits: 2.4L L4 | HSC28LL | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| ULTRA-POWER Fits: 3.7L V6 | HS26229PT | 🇺🇸 US 🇨🇦 CA | Head Bolts Not IncludedHead Bolt Replacement Recommended | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 021002801 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 3.7L V6 | 021043301 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Plastic Valve Cover | View on Amazon |
| VICTOR REINZ Fits: 3.7L V6 | 021043201 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Stamped Steel Valve Cover | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
33 Cylinder Head Gasket Set parts are listed for the 2005 Jeep Liberty, from ENGINETECH, FEL-PRO, APEX and 8 other brands. APEX AHS2117 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.
Cylinder Head Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 2.4L L4, 3.7L V6 | 4556020AB | 🇺🇸 US 🇨🇦 CA | 1.25 Diameter | View on Amazon |
| MOPAR Fits: 3.7L V6 | 53021031 | 🇺🇸 US 🇨🇦 CA | Includes O-Ring | View on Amazon |
This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
2 Cylinder Head Plug parts for the 2005 Jeep Liberty come from MOPAR.
Part numbers include MOPAR 4556020AB and MOPAR 53021031.
Cylinder Head Spacer Shim
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.4L L4 | CHS1044 | 🇺🇸 US 🇨🇦 CA | 0.020 Thick | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | CHS1045 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0.020 Thick | View on Amazon |
| SBI Fits: 2.4L L4 | 2302120 | 🇺🇸 US 🇨🇦 CA | New Height - 5.411 - 5.419MIN Height 5.403 | View on Amazon |
This table covers the Cylinder Head Spacer shims.
3 Cylinder Head Spacer Shim parts are listed for the 2005 Jeep Liberty, from ENGINETECH and SBI.
This group includes ENGINETECH CHS1044, ENGINETECH CHS1045 and SBI 2302120.
Cylinder Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.7L V6 | ESL174 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the wear sleeves used to restore a Cylinder seal surface.
One part is listed for the 2005 Jeep Liberty — ENGINETECH ESL174.
Engine Block Heater
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KAT'S HEATERS Fits: 2.4L L4 | 11414 | 🇺🇸 US 🇨🇦 CA | Freeze Plug Heater | View on Amazon |
| KAT'S HEATERS Fits: 3.7L V6 | 11618 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Freeze Plug Heater | View on Amazon |
| KAT'S HEATERS Fits: 3.7L V6 | 13100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Circulation Tank Heater Thermostatically Controlled | View on Amazon |
| MOPAR Fits: 3.7L V6 | 56041304AB | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the block heaters that warm the coolant or oil in cold weather.
4 Engine Block Heater parts for the 2005 Jeep Liberty come from 2 brands — KAT'S HEATERS and MOPAR.
This group includes KAT'S HEATERS 11414, KAT'S HEATERS 11618 and KAT'S HEATERS 13100 and the remaining parts above.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.7L V6 | CR226K2 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi-Layer Steel Head Gaskets | View on Amazon |
| FEL-PRO Popular Fits: 3.7L V6 | 2601959 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Perma Dry Molded Rubber Oil Pan Gasket(s) & Valve Cover Gasket(s) Included | View on Amazon |
| AJUSA Fits: 2.4L L4 | 50281500 | 🇺🇸 US 🇨🇦 CA | Engine EDO | View on Amazon |
| AJUSA Fits: 3.7L V6 | 50488700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Plastic Valve Cover | View on Amazon |
| AJUSA Fits: 3.7L V6 | 50488600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Steel Valve Cover | View on Amazon |
| APEX Fits: 3.7L V6 | AFS2074 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Stamped Steel Valve Covers | View on Amazon |
| APEX Fits: 3.7L V6 | AFS2082 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Plastic Valve Covers | View on Amazon |
| ENGINETECH Fits: 2.4L L4 | CR148K13 | 🇺🇸 US 🇨🇦 CA | Multi-Layer Steel Head Gasket | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | CR226K1 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with MLS head gaskets | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | CR226 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rebuilder Set without rear main or valve stem sealswith MLS head gaskets | View on Amazon |
| FEL-PRO Fits: 3.7L V6 | 2601960 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Perma Dry Molded Rubber Oil Pan Gasket(s) & Valve Cover Gasket(s) Included | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | 953714 | 🇺🇸 US 🇨🇦 CA | Full Gasket Set | View on Amazon |
| TOPLINE Fits: 2.4L L4 | CGSC28LL | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ULTRA-POWER Fits: 3.7L V6 | 2601960 | 🇺🇸 US 🇨🇦 CA | Head Bolts Not IncludedIncludes Molded Rubber Oil Pan Gasket(s), Molded Rubber Valve Cover Gasket(s), Premium Valve Stem Seals | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
14 Engine Kit Gasket Set parts are listed for the 2005 Jeep Liberty, from ENGINETECH, AJUSA, FEL-PRO and 4 other brands. ENGINETECH CR226K2 carries the "Popular" badge.
Engine Lift Bracket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 2.4L L4 | 53013486AA | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the brackets that mount the Engine Lift. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners.
One part is listed for the 2005 Jeep Liberty — MOPAR 53013486AA.
Engine Rebuild Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.7L V6 | RCCR226AP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Recon KitPremium | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | RCCR226BP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Recon KitPremium | View on Amazon |
This table covers the Engine rebuild kits.
ENGINETECH supplies both parts for the 2005 Jeep Liberty.
This group includes ENGINETECH RCCR226AP and ENGINETECH RCCR226BP.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.4L L4 | V4353 | 🇺🇸 US 🇨🇦 CA | 3 Groove.2329 stem | View on Amazon |
| ENGINETECH Popular Fits: 3.7L V6 | V4357 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | .2722 stem1.457 Head | View on Amazon |
| MELLING Popular Fits: 2.4L L4 | V2009 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Popular Fits: 3.7L V6 | V5560 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ITM ENGINE COMPONENTS Fits: 3.7L V6 | RX5047 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.7L V6 | 2114074 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.457 IN Head Diameter0.2722 IN Stem Diameter | View on Amazon |
| MOPAR Fits: 2.4L L4 | 4777898AA | 🇺🇸 US 🇨🇦 CA | Standard | View on Amazon |
| MOPAR Fits: 3.7L V6 | 53021916AB | 🇺🇸 US 🇨🇦 CA | Standard | View on Amazon |
| QUALCAST Fits: 2.4L L4 | 102009 | 🇺🇸 US 🇨🇦 CA | 1.120 Head Diameter. Non Turbo. 3 Groove | View on Amazon |
| QUALCAST Fits: 2.4L L4 | 102035 | 🇺🇸 US 🇨🇦 CA | 1.120 Head Diameter. Turbo. 3 Groove | View on Amazon |
| QUALCAST Fits: 3.7L V6 | 101919 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.457 Head Diameter. 3 Groove | View on Amazon |
| SBI Fits: 2.4L L4 | 02009 | 🇺🇸 US 🇨🇦 CA | 3 Groove | View on Amazon |
| TOPLINE Fits: 2.4L L4 | EVC26L | 🇺🇸 US 🇨🇦 CA | 3 keeper | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
13 Exhaust Valve parts for the 2005 Jeep Liberty come from 8 brands — QUALCAST, ENGINETECH, MELLING and 5 other brands. The "Popular" part is ENGINETECH V4353.
Expansion Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 2.4L L4, 3.7L V6 | 555025 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Nominal Dia.: 1-3/8"Metric Dia. | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | PK824 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Steel | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | PK824B | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Brass | View on Amazon |
| MOPAR Fits: 2.4L L4 | 5096861AB | 🇺🇸 US 🇨🇦 CA | Transmission-6-Speed Manual, NSG3704WD | View on Amazon |
| MOPAR Fits: 2.4L L4 | 6036543AA | 🇺🇸 US 🇨🇦 CA | .125-27x.310 Oil Galley | View on Amazon |
| QUALCAST Fits: 2.4L L4 | 97167 | 🇺🇸 US 🇨🇦 CA | Steel | View on Amazon |
| QUALCAST Fits: 2.4L L4 | 97167B | 🇺🇸 US 🇨🇦 CA | Brass | View on Amazon |
| QUALCAST Fits: 3.7L V6 | 97166 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Steel | View on Amazon |
| QUALCAST Fits: 3.7L V6 | 97166B | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Brass | View on Amazon |
| TOPLINE Fits: 2.4L L4 | EPSC26 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
10 Expansion Plug parts are listed for the 2005 Jeep Liberty, from QUALCAST, ENGINETECH, MOPAR and 2 other brands. DORMAN 555025 carries the "Popular" badge.
Harmonic Balancer
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Fits: 3.7L V6 | SK594191 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DAYCO Popular Fits: 3.7L V6 | PB1353N | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Premium | View on Amazon |
| DORMAN Popular Fits: 3.7L V6 | 594191 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Serpentine BeltDiameter | View on Amazon |
| ATP Fits: 3.7L V6 | 102166 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Serpentine | View on Amazon |
| MOPAR Fits: 3.7L V6 | 53020689AB | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PIONEER Fits: 3.7L V6 | DA321 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Groove Quantity 6Serpentine | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP Fits: 2.4L L4 | 102492 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DORMAN Fits: 2.4L L4 | 594802 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.
8 Harmonic Balancer parts are listed for the 2005 Jeep Liberty, from DORMAN, ATP, SKP and 3 other brands. DAYCO PB1353N carries the "Popular" badge.
In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594191.
The Standard Replacement section: 5 options from DAYCO, DORMAN, ATP and 2 other brands. DAYCO PB1353N is listed in this group.
2 ungrouped parts are not assigned to a grade, with the same engine-level match.
Listed part numbers: DAYCO PB1353N, SKP SK594191 and DORMAN 594191, plus the other parts above.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 3.7L V6 | AMS2740 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| FEL-PRO Popular Fits: 2.4L L4 | MS93219 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| FEL-PRO Popular Fits: 3.7L V6 | MS932051 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| AJUSA Fits: 3.7L V6 | 13200500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| APEX Fits: 2.4L L4 | AMS2470 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| ENGINE PRO Fits: 3.7L V6 | 31109552 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | ICR226A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 2.4L L4 | MS19235 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | MS16353 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMolded Rubber | View on Amazon |
| MOPAR Fits: 2.4L L4 | 4777873AB | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MOPAR Fits: 3.7L V6 | 53010310AB | 🇺🇸 US 🇨🇦 CA | Intake Manifold Seal | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 111028101 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ Fits: 3.7L V6 | 111026101 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMolded Rubber | View on Amazon |
| VICTOR REINZ Fits: 3.7L V6 | 111068901 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
14 Intake Manifold Gasket parts are listed for the 2005 Jeep Liberty, from VICTOR REINZ, APEX, FEL-PRO and 5 other brands. APEX AMS2740 carries the "Popular" badge.
Intake Plenum Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 2.4L L4 | MS93220 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| AJUSA Fits: 2.4L L4 | 13171400 | 🇺🇸 US 🇨🇦 CA | Engine EDO | View on Amazon |
| APEX Fits: 2.4L L4 | AMS2474 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | MS19521 | 🇺🇸 US 🇨🇦 CA | Plenum Gasket SetFuel Injection | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 151033001 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Intake Plenum Gasket parts for the 2005 Jeep Liberty come from 5 brands — FEL-PRO, AJUSA, APEX and 2 other brands. The "Popular" part is FEL-PRO MS93220.
Listed part numbers: FEL-PRO MS93220, AJUSA 13171400 and APEX AMS2474, plus the other parts above.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.4L L4 | V4354 | 🇺🇸 US 🇨🇦 CA | .2340 stem1.370 Head | View on Amazon |
| MELLING Popular Fits: 2.4L L4 | V2008 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Popular Fits: 3.7L V6 | V1918 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| SKP Popular Fits: 3.7L V6 | SKV1918 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 3 GrooveStandard Size | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | V3704 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | .2734 stem1.917 Head | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 3.7L V6 | RV5047 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.7L V6 | 2114073 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.915 IN Head Diameter0.2734 IN Stem Diameter | View on Amazon |
| QUALCAST Fits: 2.4L L4 | 102008 | 🇺🇸 US 🇨🇦 CA | 1.370 Head Diameter. Non and Turbo. 3 Groove | View on Amazon |
| QUALCAST Fits: 3.7L V6 | 101918 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.915 Head Diameter. 3 Groove | View on Amazon |
| SBI Fits: 2.4L L4 | 02008 | 🇺🇸 US 🇨🇦 CA | 3 Groove | View on Amazon |
| SEALED POWER Fits: 2.4L L4 | V4606 | 🇺🇸 US 🇨🇦 CA | 3 GrooveChrome Plated Stem | View on Amazon |
| TOPLINE Fits: 2.4L L4 | IVC26L | 🇺🇸 US 🇨🇦 CA | 3 keeper | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
12 Intake Valve parts for the 2005 Jeep Liberty come from 9 brands — ENGINETECH, MELLING, QUALCAST and 6 other brands. The "Popular" part is ENGINETECH V4354.
Motor Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Popular Fits: 2.4L L4 | 3010 | 🇺🇸 US 🇨🇦 CA | Front RightCOMPLETE ASSEMBLY | View on Amazon |
| DEA / MARMON RIDE CONTROL Popular Fits: 2.4L L4 | A3009 | 🇺🇸 US 🇨🇦 CA | Front Left | View on Amazon |
| DEA / MARMON RIDE CONTROL Popular Fits: 3.7L V6 | A3014 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Front RightRWD | View on Amazon |
| DEA / MARMON RIDE CONTROL Popular Fits: 3.7L V6 | A5284 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Front LeftRWD | View on Amazon |
| ANCHOR Fits: 2.4L L4 | 3009 | 🇺🇸 US 🇨🇦 CA | Front LeftComplete Assembly | View on Amazon |
| ANCHOR Fits: 3.7L V6 | 3015 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Front Left4WD | View on Amazon |
| ANCHOR Fits: 3.7L V6 | 3014 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Front Right4WD | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 2.4L L4 | A3010 | 🇺🇸 US 🇨🇦 CA | Front Right | View on Amazon |
| PIONEER Fits: 3.7L V6 | 603014 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right | View on Amazon |
| PIONEER Fits: 3.7L V6 | 605284 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left | View on Amazon |
| WESTAR Fits: 2.4L L4 | EM3009 | 🇺🇸 US 🇨🇦 CA | Front Left | View on Amazon |
| WESTAR Fits: 2.4L L4 | EM3010 | 🇺🇸 US 🇨🇦 CA | Front Right | View on Amazon |
| WESTAR Fits: 3.7L V6 | EM3014 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right | View on Amazon |
| WESTAR Fits: 3.7L V6 | EM3015 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
14 Motor Mount parts for the 2005 Jeep Liberty come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 1 other brand. The "Popular" part is ANCHOR 3010.
Oil
Summary: Notes list SAE 5W-30 and SAE 10W-30. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include MOBIL, VALVOLINE and LIQUI MOLY.
Full Synthetic
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Popular Fits: 2.4L L4, 3.7L V6 | 125195 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic 5W-30Mobil Full Synthetic | View on Amazon |
| MOBIL Popular Fits: 2.4L L4, 3.7L V6 | 124315 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 5W-30Mobil 1 Advanced | View on Amazon |
| IDEMITSU Fits: 2.4L L4, 3.7L V6 | 30015204750 | 🇺🇸 US | IFG3 5W-30 SP/Motor Oil1 Quart | View on Amazon |
| IDEMITSU Fits: 2.4L L4, 3.7L V6 | 30013015750 | 🇺🇸 US | Full Synthetic 5W-30 GF-6/SP1 Quart | View on Amazon |
| IDEMITSU Fits: 2.4L L4, 3.7L V6 | 30013015953 | 🇺🇸 US | Full Synthetic 5W-30 GF-6/SP5 Quart | View on Amazon |
| LIQUI MOLY Fits: 2.4L L4, 3.7L V6 | 20136 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec AA 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 2.4L L4, 3.7L V6 | 20226 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molygen New Generation 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 2.4L L4, 3.7L V6 | 20138 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec AA 5W-305 Liter | View on Amazon |
| LIQUI MOLY Fits: 2.4L L4, 3.7L V6 | 20228 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molygen New Generation 5W-305 Liter | View on Amazon |
| MOBIL Fits: 2.4L L4, 3.7L V6 | 122319 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 10W-30Mobil 1 Advanced | View on Amazon |
| MOBIL Fits: 2.4L L4, 3.7L V6 | 102990 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance 10W-30Mobil 1 Extended Performance | View on Amazon |
| MOBIL Fits: 2.4L L4, 3.7L V6 | 112627 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance 5W-30Mobil 1 Extended Performance | View on Amazon |
| MOBIL Fits: 2.4L L4, 3.7L V6 | 124595 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Truck & SUV 5W-30Mobil 1 Truck & SUV | View on Amazon |
| PENTOSIN Fits: 2.4L L4, 3.7L V6 | 8044214 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 5W-30-Pentospeed-DEXOS1 GEN31 Liter | View on Amazon |
| PENTOSIN Fits: 2.4L L4, 3.7L V6 | 8044216 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 5W-30-Pentospeed-DEXOS1 GEN35 Liters | View on Amazon |
| VALVOLINE Fits: 2.4L L4, 3.7L V6 | VV955 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Protection Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 2.4L L4, 3.7L V6 | 891678 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Protection Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 2.4L L4, 3.7L V6 | 904564 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Restore & Protect Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 2.4L L4, 3.7L V6 | 891670 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 2.4L L4, 3.7L V6 | 904566 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Restore & Protect Full Synthetic SAE 5W-305 Quart | View on Amazon |
| VALVOLINE Fits: 2.4L L4, 3.7L V6 | 881164 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart | View on Amazon |
High Mileage (>75,000 Miles)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Popular Fits: 2.4L L4, 3.7L V6 | VV1556 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Max Life High Mileage Synthetic Blend SAE 5W-301 Quart | View on Amazon |
| MOBIL Fits: 2.4L L4, 3.7L V6 | 125201 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage 5W-301 Quart | View on Amazon |
| MOBIL Fits: 2.4L L4, 3.7L V6 | 103535 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | High Mileage 10W-30Mobil 1 High Mileage | View on Amazon |
| MOBIL Fits: 2.4L L4, 3.7L V6 | 103767 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | High Mileage 5W-30Mobil 1 High Mileage | View on Amazon |
| MOBIL Fits: 2.4L L4, 3.7L V6 | 123842 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance High Mileage 5W-30Synthetic | View on Amazon |
| VALVOLINE Fits: 2.4L L4, 3.7L V6 | VV179 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage with Max Life Technology SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 2.4L L4, 3.7L V6 | 881163 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Max Life High Mileage Synthetic Blend SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 2.4L L4, 3.7L V6 | 881169 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage with Max Life Technology SAE 5W-30Easy Pour 5 Quart | View on Amazon |
Synthetic Blend
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 2.4L L4, 3.7L V6 | 109290 | 🇺🇸 US | Synthetic BlendAPI SP Specifications | View on Amazon |
| MOBIL Popular Fits: 2.4L L4, 3.7L V6 | 124406 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Super 10W-30Mobil Super | View on Amazon |
| MOBIL Popular Fits: 2.4L L4, 3.7L V6 | 124407 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Super 5W-30Mobil Super | View on Amazon |
| VALVOLINE Fits: 2.4L L4, 3.7L V6 | 797975 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Daily Protection SAE 5W-30 Synthetic Blend1 Quart | View on Amazon |
| VALVOLINE Fits: 2.4L L4, 3.7L V6 | 881159 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Daily Protection SAE 5W-30 Synthetic BlendEasy Pour 5 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
34 Oil parts for the 2005 Jeep Liberty come from 6 brands — MOBIL, VALVOLINE, LIQUI MOLY and 3 other brands. The "Popular" part is MOBIL 125195. Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend are all represented, and Full Synthetic alone accounts for 21 parts.
Oil Cooler Mounting Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HAYDEN Fits: 2.4L L4, 3.7L V6 | 238 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber Block Mounting Kit for Heavy Duty Oil Cooler | View on Amazon |
| HAYDEN Fits: 2.4L L4, 3.7L V6 | 153 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Metal Mounting Bracket Kit for Heavy Duty Oil Cooler | View on Amazon |
This table covers the Oil Cooler Mounting kits.
HAYDEN supplies both parts for the 2005 Jeep Liberty.
Listed part numbers: HAYDEN 238 and HAYDEN 153.
Oil Dipstick / Tube
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.4L L4 | 917329 | 🇺🇸 US 🇨🇦 CA | Dipstick Only | View on Amazon |
| MOPAR Fits: 2.4L L4 | 53010494AD | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MOPAR Fits: 3.7L V6 | 53021026AJ | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKP Fits: 2.4L L4 | SK917344 | 🇺🇸 US 🇨🇦 CA | Tube Only | View on Amazon |
| ULTRA-POWER Fits: 2.4L L4 | 917344 | 🇺🇸 US 🇨🇦 CA | Oil Dipstick Tube | View on Amazon |
This table covers the Oil Dipstick tubes.
5 Oil Dipstick / Tube parts for the 2005 Jeep Liberty come from 4 brands — MOPAR, DORMAN, SKP and 1 other brand.
Listed part numbers: DORMAN 917329, MOPAR 53010494AD and MOPAR 53021026AJ, plus the other parts above.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AGS Popular Fits: 3.7L V6 | ODP00007 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | M14x1.50 | View on Amazon |
| DORMAN Popular Fits: 2.4L L4 | 090052 | 🇺🇸 US 🇨🇦 CA | Pilot PointThread Size | View on Amazon |
| AGS Fits: 2.4L L4 | ODP00016 | 🇺🇸 US 🇨🇦 CA | 1/2-20 | View on Amazon |
| DORMAN Fits: 2.4L L4 | 090058 | 🇺🇸 US 🇨🇦 CA | Pilot PointMolded Gasket | View on Amazon |
| DORMAN Fits: 3.7L V6 | 090172 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Pilot Point Molded GasketThread Size | View on Amazon |
| DORMAN Fits: 3.7L V6 | 092020 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Thread Size: M14-1.50Twist Style | View on Amazon |
| MOPAR Fits: 2.4L L4 | 4763739 | 🇺🇸 US 🇨🇦 CA | .500-20x.90 | View on Amazon |
| MOPAR Fits: 3.7L V6 | 6504894AA | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| REIN Fits: 2.4L L4 | HWU0116 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| REIN Fits: 3.7L V6 | HWU0106 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the drain plugs in the oil pan.
10 Oil Drain Plug parts for the 2005 Jeep Liberty come from 4 brands — DORMAN, AGS, MOPAR and 1 other brand. The "Popular" part is AGS ODP00007.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GATES Popular Fits: 2.4L L4 | 31118 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CALORSTAT Fits: 2.4L L4 | OC2317 | 🇺🇸 US 🇨🇦 CA | PlasticScrewithoutn | View on Amazon |
| MOPAR Fits: 2.4L L4 | 53010656AA | 🇺🇸 US 🇨🇦 CA | Includes O-Ring | View on Amazon |
| MOPAR Fits: 3.7L V6 | 53032389AD | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MOTORAD Fits: 2.4L L4 | MO111 | 🇺🇸 US 🇨🇦 CA | Material: Plastic | View on Amazon |
| MOTORAD Fits: 3.7L V6 | MO120 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Diameter: 3.236 inLower Diameter: 2.768" | View on Amazon |
| SKP Fits: 2.4L L4 | SKMO111 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| TECHPRO Fits: 3.7L V6 | 87AM009 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the caps on the oil filler neck.
8 Oil Filler Cap parts for the 2005 Jeep Liberty come from 6 brands — MOPAR, MOTORAD, GATES and 3 other brands. The "Popular" part is GATES 31118.
Listed part numbers: GATES 31118, CALORSTAT OC2317 and MOPAR 53010656AA, plus the other parts above.
Oil Filler Tube
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 2.4L L4 | 53010476AB | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MOPAR Fits: 3.7L V6 | 53020890 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Filler tubes.
2 Oil Filler Tube parts for the 2005 Jeep Liberty come from MOPAR.
This group includes MOPAR 53010476AB and MOPAR 53020890.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| K&N Popular Fits: 3.7L V6 | PS2009 | 🇺🇸 US 🇨🇦 CA | Pro-Series without Wrench Off Nut | View on Amazon |
| BOSCH Fits: 2.4L L4 | 72161WS | 🇺🇸 US 🇨🇦 CA | Workshop Oil Filter | View on Amazon |
| BOSCH Fits: 3.7L V6 | 72143WS | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Workshop Oil Filter | View on Amazon |
| CHAMP / LUBER-FINER Fits: 3.7L V6 | PH400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Inside Diameter: 3/4-16 Thread.Spin-On | View on Amazon |
| FRAM Fits: 2.4L L4 | FE3614 | 🇺🇸 US 🇨🇦 CA | Spin-OnTough Guard or Synthetic Endurance | View on Amazon |
| FRAM Fits: 3.7L V6 | FE3600 | 🇺🇸 US 🇨🇦 CA | Spin-OnTough Guard or Synthetic Endurance | View on Amazon |
| FVP Fits: 2.4L L4 | R1348 | 🇺🇸 US 🇨🇦 CA | Spin-On Filter | View on Amazon |
| FVP Fits: 3.7L V6 | R1516 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Burst Pressure: 275 PSI | View on Amazon |
| PRO-TEC Fits: 2.4L L4 | PXL51348 | 🇺🇸 US 🇨🇦 CA | Spin-On Filter | View on Amazon |
| PRO-TEC Fits: 3.7L V6 | PXL51516 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Outer Diameter Top: 2.921 In | View on Amazon |
| PUROLATOR Fits: 3.7L V6 | TL20195 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bypass Relief Valve Setting: 12-15 PSIMedia Material: Cellulose | View on Amazon |
| VARIOUS MFR Fits: 2.4L L4 | PG241 | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
| VARIOUS MFR Fits: 3.7L V6 | PG195 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WIX Popular Fits: 2.4L L4 | 51348XP | 🇺🇸 US 🇨🇦 CA | XP Extreme DutyBest for Synthetic Motor Oils | View on Amazon |
| WIX Popular Fits: 3.7L V6 | 51516XP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | XP Extreme DutyBest For Synthetic Motor Oils | View on Amazon |
| MOBIL Fits: 2.4L L4 | M1102A | 🇺🇸 US 🇨🇦 CA | Extended Performance | View on Amazon |
| MOBIL Fits: 3.7L V6 | M1209A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 3.7L V6 | PFL400A | 🇺🇸 US 🇨🇦 CA | Gold / ProfessionalSpin-On | View on Amazon |
| DENSO Popular Fits: 2.4L L4 | 1502010 | 🇺🇸 US 🇨🇦 CA | Engine Oil Filter or FTF Engine Oil Filter | View on Amazon |
| MOTORCRAFT Popular Fits: 2.4L L4 | FL910S | 🇺🇸 US 🇨🇦 CA | OE Design3/4" Thread | View on Amazon |
| MOTORCRAFT Popular Fits: 3.7L V6 | FL400S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WIX Popular Fits: 2.4L L4 | 51348 | 🇺🇸 US 🇨🇦 CA | Spin-On Filter | View on Amazon |
| WIX Popular Fits: 3.7L V6 | 51516 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Burst Pressure: 275 PSIBypass Relief Valve Setting: 16 PSI | View on Amazon |
| ACDELCO Fits: 2.4L L4 | PF53 | 🇺🇸 US 🇨🇦 CA | Gold / Professional or Gold / Professional DurapackSpin-On | View on Amazon |
| BECK/ARNLEY Fits: 3.7L V6 | 0410807 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ST-ST Type | View on Amazon |
| BECK/ARNLEY Fits: 3.7L V6 | 0418095 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| BOSCH Fits: 2.4L L4 | 3330 | 🇺🇸 US 🇨🇦 CA | Premium Oil FilterConnection Size: 3/4-16 | View on Amazon |
| BOSCH Fits: 3.7L V6 | 3422 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Premium Oil Filter | View on Amazon |
| DENSO Fits: 3.7L V6 | 1502013 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Oil Filter or FTF Engine Oil Filter | View on Amazon |
| HASTINGS / BALDWIN Fits: 2.4L L4 | LF157 | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
| HASTINGS / BALDWIN Fits: 3.7L V6 | LF134 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| HENGST Fits: 3.7L V6 | H14W23 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Filter Media Material: CelluloseSpin-On | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | OC338 | 🇺🇸 US 🇨🇦 CA | Spin-On87.00mm Height | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | OC479 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spin-On118.00mm Height | View on Amazon |
| MANN Fits: 3.7L V6 | W71912 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bypass Relief Valve Setting: 15 PSIHeight: 4.84 In | View on Amazon |
| MANN Fits: 3.7L V6 | W71936 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Synthetic Oil Application. Premium filter recommended | View on Amazon |
| MOPAR Fits: 2.4L L4 | 4105409BB | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MOPAR Fits: 3.7L V6 | 4781452AA | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MOTORCRAFT Fits: 2.4L L4 | FL2114 | 🇺🇸 US 🇨🇦 CA | Retail Spec | View on Amazon |
| MOTORCRAFT Fits: 3.7L V6 | FL2120 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VARIOUS MFR Fits: 2.4L L4 | PG241EX | 🇺🇸 US 🇨🇦 CA | Extended LifeSpin-On | View on Amazon |
| VARIOUS MFR Fits: 3.7L V6 | PG195EX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Life | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
42 Oil Filter parts for the 2005 Jeep Liberty come from 19 brands — BOSCH, VARIOUS MFR, WIX and 16 other brands. The "Popular" part is K&N PS2009. Economy, High Performance / Heavy Duty and Standard Replacement are all represented, and Standard Replacement alone accounts for 25 parts.
Oil Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 3.7L V6 | SK264249 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ULTRA-POWER Popular Fits: 3.7L V6 | 264249 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ATP Fits: 3.7L V6 | 103280 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| AUTOTECNICA Fits: 3.7L V6 | CY1416241 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| DORMAN Fits: 2.4L L4 | 264859 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DORMAN Fits: 3.7L V6 | 264249 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| LILAND GLOBAL Fits: 3.7L V6 | ICRP33A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MOPAR Fits: 2.4L L4 | 53010491AA | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MOPAR Fits: 3.7L V6 | 53021779AB | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PIONEER Fits: 3.7L V6 | 501333 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| SPECTRA PREMIUM Fits: 3.7L V6 | CRP33A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | GASKET AND/OR SEALANT NOT INCLUDED | View on Amazon |
| ULTRA-POWER Fits: 2.4L L4 | 264859 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the oil pans that hold the engine's oil sump.
12 Oil Pan parts are listed for the 2005 Jeep Liberty, from ULTRA-POWER, DORMAN, MOPAR and 6 other brands. SKP SK264249 carries the "Popular" badge.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.7L V6 | OCR226 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FEL-PRO Popular Fits: 2.4L L4 | OS30676R | 🇺🇸 US 🇨🇦 CA | Permadry Molded Rubber | View on Amazon |
| FEL-PRO Popular Fits: 3.7L V6 | OS30743R | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Permadry RubberIncludes Windage Tray | View on Amazon |
| AJUSA Fits: 2.4L L4 | 14082500 | 🇺🇸 US 🇨🇦 CA | Multi Layered Steel | View on Amazon |
| APEX Fits: 2.4L L4 | AOP1108 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 3.7L V6 | AOP274 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 2.4L L4 | OS32155 | 🇺🇸 US 🇨🇦 CA | Molded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | OS32234 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molded Rubber | View on Amazon |
| MOPAR Fits: 2.4L L4 | 4621579 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MOPAR Fits: 3.7L V6 | 53021001 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKP Fits: 3.7L V6 | SKOS30743R | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Windage Tray, Rubber Gasket(s) | View on Amazon |
| ULTRA-POWER Fits: 2.4L L4 | OS30676R | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber Gasket(s) Included | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 101021201 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 3.7L V6 | 101022001 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
14 Oil Pan Gasket parts for the 2005 Jeep Liberty come from 9 brands — FEL-PRO, APEX, MAHLE / CLEVITE and 6 other brands. The "Popular" part is ENGINETECH OCR226.
Oil Pump
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.7L V6 | EPK124 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 'Pressure King' Value Line Pump | View on Amazon |
| SKP Fits: 3.7L V6 | SKOM297 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ULTRA-POWER Fits: 3.7L V6 | M297 | 🇺🇸 US 🇨🇦 CA | Does Not Include Oil Pickup Tube Assy | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.7L V6 | M297 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include Oil Pickup Tube Assembly | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | EP297 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 3.7L V6 | M297351S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Oil Pickup Tube Assembly | View on Amazon |
| MOPAR Fits: 3.7L V6 | 68045796AA | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SEALED POWER Fits: 3.7L V6 | 22443647 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include Oil Pickup Tube Assembly | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.4L L4 | EP346 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 2.4L L4 | M346 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SEALED POWER Fits: 2.4L L4 | 22443675 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.
11 Oil Pump parts for the 2005 Jeep Liberty come from 6 brands — ENGINETECH, MELLING, SEALED POWER and 3 other brands. The "Popular" part is ENGINETECH EPK124.
The Economy section: 3 options from ENGINETECH, SKP and ULTRA-POWER. ENGINETECH EPK124 is listed in this group.
Standard Replacement: 5 parts, from MELLING, ENGINETECH, MOPAR and 1 other brand. A representative part number is MELLING M297.
3 further parts sit outside the graded sections, with the same engine-level match.
Oil Pump Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.4L L4, 3.7L V6 | 284390 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Suction Pipe | View on Amazon |
This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2005 Jeep Liberty — ELRING 284390.
Oil Pump Pickup Tube / Screen
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 3.7L V6 | 351S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MOPAR Fits: 3.7L V6 | 53021776AA | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SEALED POWER Fits: 3.7L V6 | 22415071 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the pickup tubes and screens that feed the oil pump.
3 Oil Pump Pickup Tube / Screen parts are listed for the 2005 Jeep Liberty, from MELLING, MOPAR and SEALED POWER.
This group includes MELLING 351S, MOPAR 53021776AA and SEALED POWER 22415071.
Oil Pump Pickup Tube O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 2.4L L4 | 6032920 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MOPAR Fits: 3.7L V6 | 53020861 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the O-rings that seal the oil-pump pickup tube. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
2 Oil Pump Pickup Tube O-Ring parts for the 2005 Jeep Liberty come from MOPAR.
Listed part numbers: MOPAR 6032920 and MOPAR 53020861.
Oil Pump Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 2.4L L4, 3.7L V6 | 4659945 | 🇺🇸 US 🇨🇦 CA | Transmission-4-SPD. Automatic, 42RLE4WD | View on Amazon |
This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2005 Jeep Liberty — MOPAR 4659945.
Piston
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.4L L4 | P5055 | 🇺🇸 US | Dome Top .450 HighHypereutectic Coated skirt | View on Amazon |
| ENGINETECH Popular Fits: 3.7L V6 | P30606 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Flat TopCoated Skirt | View on Amazon |
| ENGINETECH Fits: 2.4L L4 | K50554P | 🇺🇸 US | Dome Top .450 Highwith Premium Rings | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | 2243564 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Skirt Coated | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | 2243564WR | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with RingsSkirt Coated | View on Amazon |
| SILV-O-LITE Fits: 2.4L L4 | 3249HC | 🇺🇸 US 🇨🇦 CA | Hyper-CoatedOffset Pin Configuration | View on Amazon |
| SILV-O-LITE Fits: 3.7L V6 | 3251HC | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hyper-CoatedFloating Pin Type | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SEALED POWER Fits: 2.4L L4 | H893CP | 🇺🇸 US 🇨🇦 CA | HypereutecticAlloy | View on Amazon |
| SEALED POWER Fits: 3.7L V6 | H884CP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Flat HeadRing Groove Widths: 1.5mm, 1.5mm, 3.0mm | View on Amazon |
| TOPLINE Fits: 2.4L L4 | PAC30PTL | 🇺🇸 US 🇨🇦 CA | with Rings | View on Amazon |
This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.
10 Piston parts are listed for the 2005 Jeep Liberty, from ENGINETECH, MAHLE / CLEVITE, SILV-O-LITE and 2 other brands. ENGINETECH P5055 carries the "Popular" badge.
The Premium section lists 7 options from ENGINETECH, MAHLE / CLEVITE and SILV-O-LITE — a step above OE specification in materials, tolerances or warranty terms. ENGINETECH P5055 is listed in this group.
The Standard Replacement section: 3 options from SEALED POWER and TOPLINE. SEALED POWER H893CP is listed in this group.
Piston Ring
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.4L L4 | C87544 | 🇺🇸 US 🇨🇦 CA | PremiumSet | View on Amazon |
| ENGINETECH Popular Fits: 3.7L V6 | S93136 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PremiumSet | View on Amazon |
| HASTINGS MANUFACTURING Fits: 3.7L V6 | 2M4636S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Plasma Moly Top Ring1 Cylinder Set | View on Amazon |
| HASTINGS MANUFACTURING Fits: 3.7L V6 | 2M4636 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Plasma Moly Top RingTop Ring Surface Treatment: Plasma Moly | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | 41676 | 🇺🇸 US 🇨🇦 CA | PremiumMaterial Carbon Steel / Carbon Steel / Stainless Steel | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | 41857CP | 🇺🇸 US 🇨🇦 CA | PremiumMaterial Carbon Steel / Carbon Steel / Stainless Steel | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | 41860CP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PremiumMaterial Carbon Steel / Cast Iron / Stainless Steel | View on Amazon |
| SEALED POWER Fits: 2.4L L4 | E640K | 🇺🇸 US 🇨🇦 CA | PremiumRing Groove Widths: 1.5mm, 1.5mm, 3.0mm | View on Amazon |
| SEALED POWER Fits: 3.7L V6 | E906K | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PremiumRing Groove Widths: 1.5mm, 1.5mm, 3.0mm | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HASTINGS MANUFACTURING Popular Fits: 3.7L V6 | 4636 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full SetTop Ring Surface Treatment: Phosphate | View on Amazon |
| HASTINGS MANUFACTURING Fits: 3.7L V6 | 4636S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1 Cylinder SetFor 2 Ring Piston | View on Amazon |
| TOPLINE Fits: 2.4L L4 | RSC28L | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
12 Piston Ring parts are listed for the 2005 Jeep Liberty, from HASTINGS MANUFACTURING, MAHLE / CLEVITE, ENGINETECH and 2 other brands. ENGINETECH C87544 carries the "Popular" badge.
The Premium section: 9 options from MAHLE / CLEVITE, ENGINETECH, HASTINGS MANUFACTURING and 1 other brand. ENGINETECH C87544 is listed in this group.
The Standard Replacement section: 3 options from HASTINGS MANUFACTURING and TOPLINE. HASTINGS MANUFACTURING 4636 is listed in this group.
Re-Ring Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.4L L4 | RMJ148P | 🇺🇸 US | Re-Main KitPremium | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | RMCR226AP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Re-Main KitPremium | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | RMCR226BP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Re-Main KitPremium | View on Amazon |
This table covers the Re-Ring kits.
3 Re-Ring Kit parts for the 2005 Jeep Liberty come from ENGINETECH.
This group includes ENGINETECH RMJ148P, ENGINETECH RMCR226AP and ENGINETECH RMCR226BP.
Rocker Arm
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.7L V6 | MR1345 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ENGINETECH Fits: 3.7L V6 | ER9064 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Roller Follower | View on Amazon |
| MELLING Fits: 2.4L L4 | MR1324 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MOPAR Fits: 3.7L V6 | 53020742AC | 🇺🇸 US 🇨🇦 CA | VALVE | View on Amazon |
| QUALCAST Fits: 3.7L V6 | 402906 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rocker Arm, Roller CAM Follower | View on Amazon |
| SBI Fits: 2.4L L4 | 1801324 | 🇺🇸 US 🇨🇦 CA | Intake and ExhaustRoller cam follower | View on Amazon |
| SKP Fits: 3.7L V6 | SKMR1345 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| TOPLINE Fits: 2.4L L4 | RAC26 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the rocker arms that transfer cam motion to the valves.
8 Rocker Arm parts for the 2005 Jeep Liberty come from 7 brands — MELLING, ENGINETECH, MOPAR and 4 other brands. The "Popular" part is MELLING MR1345.
Listed part numbers: MELLING MR1345, ENGINETECH ER9064 and MELLING MR1324, plus the other parts above.
Thrust Washer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.7L V6 | TW608 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | (Size: Standard) | View on Amazon |
| KING ENGINE BEARINGS Fits: 3.7L V6 | TW167AM | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | BI-Metal (aluminum base) | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | TW608S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Position: 3 (Size: Standard) | View on Amazon |
| SEALED POWER Fits: 3.7L V6 | 4706F | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | (Size: Standard) | View on Amazon |
This table covers the Thrust washers.
4 Thrust Washer parts for the 2005 Jeep Liberty come from 4 brands — ENGINETECH, KING ENGINE BEARINGS, MAHLE / CLEVITE and 1 other brand.
This group includes ENGINETECH TW608, KING ENGINE BEARINGS TW167AM and MAHLE / CLEVITE TW608S and the remaining parts above.
Timing Belt
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 2.4L L4 | B265 | 🇺🇸 US 🇨🇦 CA | Camshaft | View on Amazon |
| ENGINETECH Fits: 2.4L L4 | TB265 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ITM ENGINE COMPONENTS Fits: 2.4L L4 | 4356 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DAYCO Popular Fits: 2.4L L4 | 95265 | 🇺🇸 US 🇨🇦 CA | Camshaft | View on Amazon |
| GATES Popular Fits: 2.4L L4 | T265 | 🇺🇸 US 🇨🇦 CA | Power Grip | View on Amazon |
| ACDELCO Fits: 2.4L L4 | TB265 | 🇺🇸 US 🇨🇦 CA | Professional / Gold | View on Amazon |
| BANDO Fits: 2.4L L4 | TB265 | 🇺🇸 US 🇨🇦 CA | Camshaft | View on Amazon |
| CONTINENTAL Fits: 2.4L L4 | 40265 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 2.4L L4 | B0265 | 🇺🇸 US 🇨🇦 CA | At CamshaftAt Camshaft Timing Belt | View on Amazon |
| MOPAR Fits: 2.4L L4 | 4621844 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 2.4L L4 | B265 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| TOPLINE Fits: 2.4L L4 | TBC28 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off.
12 Timing Belt parts are listed for the 2005 Jeep Liberty, from CLOYES, ENGINETECH, ITM ENGINE COMPONENTS and 9 other brands. CLOYES B265 carries the "Popular" badge.
Economy: 3 parts, from CLOYES, ENGINETECH and ITM ENGINE COMPONENTS. A representative part number is CLOYES B265.
The Standard Replacement section: 9 options from DAYCO, GATES, ACDELCO and 6 other brands. DAYCO 95265 is listed in this group.
Timing Belt & Component Kit
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 2.4L L4 | BK265B | 🇺🇸 US 🇨🇦 CA | Automatic Tensioner Adjusterwithout Bracket | View on Amazon |
| CLOYES Popular Fits: 2.4L L4 | BK265 | 🇺🇸 US 🇨🇦 CA | with BRACKET | View on Amazon |
| CONTINENTAL Fits: 2.4L L4 | GTKWP265A | 🇺🇸 US 🇨🇦 CA | Black SeriesEconomy | View on Amazon |
| CONTINENTAL Fits: 2.4L L4 | GTKWP265B | 🇺🇸 US 🇨🇦 CA | Black SeriesEconomy | View on Amazon |
| CONTINENTAL Fits: 2.4L L4 | GTKWP265 | 🇺🇸 US 🇨🇦 CA | Economy | View on Amazon |
| ULTRA-POWER Fits: 2.4L L4 | TCKWP265 | 🇺🇸 US 🇨🇦 CA | with Water Pumpwithout BRACKET | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CONTINENTAL Popular Fits: 2.4L L4 | PP265LK2 | 🇺🇸 US 🇨🇦 CA | Pro Series PLUSIncludes seals | View on Amazon |
| DAYCO Popular Fits: 2.4L L4 | WP265K4A | 🇺🇸 US 🇨🇦 CA | Includes Water Pump, Timing Belt, Camshaft Belt Tensioner, Camshaft Belt Idler | View on Amazon |
| GATES Popular Fits: 2.4L L4 | TCKWP265 | 🇺🇸 US 🇨🇦 CA | Power Gripwith Water Pump | View on Amazon |
| GATES Popular Fits: 2.4L L4 | TCKWP265A | 🇺🇸 US 🇨🇦 CA | Power GripIncludes Bracket, Water Pump | View on Amazon |
| ACDELCO Fits: 2.4L L4 | TCK265 | 🇺🇸 US 🇨🇦 CA | Professional / Gold | View on Amazon |
| ACDELCO Fits: 2.4L L4 | TCK265A | 🇺🇸 US 🇨🇦 CA | Professional / Gold | View on Amazon |
| ACDELCO Fits: 2.4L L4 | TCKWP265A | 🇺🇸 US 🇨🇦 CA | Professional / Goldwith Water Pump | View on Amazon |
| ACDELCO Fits: 2.4L L4 | TCKWP265 | 🇺🇸 US 🇨🇦 CA | Professional / Goldwith Water Pump | View on Amazon |
| CONTINENTAL Fits: 2.4L L4 | TB265K3 | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
| CONTINENTAL Fits: 2.4L L4 | TB265K2 | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
| CONTINENTAL Fits: 2.4L L4 | PP265LK3 | 🇺🇸 US 🇨🇦 CA | Pro Series PLUSIncludes seals | View on Amazon |
| DAYCO Fits: 2.4L L4 | 95265K4 | 🇺🇸 US 🇨🇦 CA | Includes: Timing Belt, Camshaft Belt Tensioner, Camshaft Belt Idler (Hydraulic Actuator Not Included)Kit | View on Amazon |
| ENGINETECH Fits: 2.4L L4 | TS265M | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
| GATES Fits: 2.4L L4 | TCK265 | 🇺🇸 US 🇨🇦 CA | Power Grip | View on Amazon |
| GATES Fits: 2.4L L4 | TCK265A | 🇺🇸 US 🇨🇦 CA | Includes BracketPower Grip | View on Amazon |
| GMB Fits: 2.4L L4 | 24200265 | 🇺🇸 US 🇨🇦 CA | without Tensioner Bracket | View on Amazon |
| GMB Fits: 2.4L L4 | 24201265 | 🇺🇸 US 🇨🇦 CA | without Tensioner Bracket | View on Amazon |
| GMB Fits: 2.4L L4 | 24203265 | 🇺🇸 US 🇨🇦 CA | with Tensioner Bracket | View on Amazon |
| GMB Fits: 2.4L L4 | 34201265 | 🇺🇸 US 🇨🇦 CA | Includes Water Pump | View on Amazon |
| GMB Fits: 2.4L L4 | 34200265 | 🇺🇸 US 🇨🇦 CA | Includes Water Pump | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 2.4L L4 | TS26265M | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
| US MOTOR WORKS Fits: 2.4L L4 | USTK265A | 🇺🇸 US 🇨🇦 CA | Includes Tensioner Bracket | View on Amazon |
| US MOTOR WORKS Fits: 2.4L L4 | USTK265 | 🇺🇸 US 🇨🇦 CA | without Tensioner Bracket | View on Amazon |
This table covers the Timing Belt & component kits.
29 Timing Belt & Component Kit parts for the 2005 Jeep Liberty come from 10 brands — CONTINENTAL, GMB, GATES and 7 other brands. The "Popular" part is CLOYES BK265B. Grades run from Economy through Standard Replacement; Standard Replacement is the most populated section, led by GMB, CONTINENTAL, GATES and 5 other brands.
Timing Belt Pulley
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 2.4L L4 | SKT42121 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ACDELCO Fits: 2.4L L4 | T43008 | 🇺🇸 US 🇨🇦 CA | Gold / ProfessionalSteel Smooth/Backside (67mm x 8mm x 33mm) | View on Amazon |
| GATES Fits: 2.4L L4 | T43008 | 🇺🇸 US 🇨🇦 CA | Steel Smooth/Backside (67mm x 8mm x 33mm) | View on Amazon |
| INA Fits: 2.4L L4 | ZT95544 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 2.4L L4 | 9610 | 🇺🇸 US 🇨🇦 CA | Adjuster | View on Amazon |
This table covers the Timing Belt pulleys. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt.
5 Timing Belt Pulley parts for the 2005 Jeep Liberty come from 5 brands — SKP, ACDELCO, GATES and 2 other brands. The "Popular" part is SKP SKT42121.
This group includes SKP SKT42121 and ACDELCO T43008 and the remaining parts above.
Timing Belt Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 2.4L L4 | 95543 | 🇺🇸 US 🇨🇦 CA | Frontwithout Bracket | View on Amazon |
| CLOYES Popular Fits: 2.4L L4 | 95544 | 🇺🇸 US 🇨🇦 CA | Automatic Tensioner Adjusterwith Bracket | View on Amazon |
| GMB Popular Fits: 2.4L L4 | 4203275 | 🇺🇸 US 🇨🇦 CA | 2nd Designwith Mounting Bracket | View on Amazon |
| CONTINENTAL Fits: 2.4L L4 | 48012 | 🇺🇸 US 🇨🇦 CA | Automatic Timing Tensioner Assembly2nd Design Mechanical Tensioner | View on Amazon |
| GATES Fits: 2.4L L4 | T43131 | 🇺🇸 US 🇨🇦 CA | Steel Smooth/Backside (67mm x 9mm x 33mm) - with Bracket | View on Amazon |
| GMB Fits: 2.4L L4 | 4207204 | 🇺🇸 US 🇨🇦 CA | without Mounting Bracket | View on Amazon |
| GMB Fits: 2.4L L4 | 4207203 | 🇺🇸 US 🇨🇦 CA | 1st Designwith Mounting Bracket | View on Amazon |
| INA Fits: 2.4L L4 | ZT95499 | 🇺🇸 US 🇨🇦 CA | Hydraulic Assembly | View on Amazon |
| INA Fits: 2.4L L4 | ZT95544 | 🇺🇸 US 🇨🇦 CA | Bearing & Bracket | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 2.4L L4 | T66205 | 🇺🇸 US 🇨🇦 CA | Bracket not Included | View on Amazon |
| S.A. GEAR Fits: 2.4L L4 | 9613 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| S.A. GEAR Fits: 2.4L L4 | 9609 | 🇺🇸 US 🇨🇦 CA | Hydraulic Assembly | View on Amazon |
| S.A. GEAR Fits: 2.4L L4 | 9610 | 🇺🇸 US 🇨🇦 CA | Bearing & Bracket | View on Amazon |
| SKP Fits: 2.4L L4 | SKT43131 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
14 Timing Belt Tensioner parts for the 2005 Jeep Liberty come from 8 brands — GMB, S.A. GEAR, CLOYES and 5 other brands. The "Popular" part is CLOYES 95543.
Timing Cam Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 3.7L V6 | S824 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left | View on Amazon |
| CLOYES Popular Fits: 3.7L V6 | S868 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right | View on Amazon |
| INA Fits: 3.7L V6 | ZSS868 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rightwith New Generation Controller (NGC) Target Wheel Electro Magnetic Reader | View on Amazon |
| MELLING Fits: 3.7L V6 | S824 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| MELLING Fits: 3.7L V6 | S868 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rightwith NGC Target Wheel | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.7L V6 | G55824 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.7L V6 | G55868 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightNGC System | View on Amazon |
| S.A. GEAR Fits: 3.7L V6 | S824 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| S.A. GEAR Fits: 3.7L V6 | S868 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightNGC (New Generation Controller - Target Wheel) Electro Magnetic | View on Amazon |
This table covers the Timing Cam sprockets.
9 Timing Cam Sprocket parts for the 2005 Jeep Liberty come from 5 brands — CLOYES, MELLING, PREFERRED COMPONENTS INC and 2 other brands. The "Popular" part is CLOYES S824.
Listed part numbers: CLOYES S824, CLOYES S868 and INA ZSS868, plus the other parts above.
Timing Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.7L V6 | 393 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LowerPrimary Timing Chain | View on Amazon |
| S.A. GEAR Popular Fits: 3.7L V6 | C393 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PRIMARY | View on Amazon |
| CLOYES Fits: 3.7L V6 | C194 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Upper | View on Amazon |
| CLOYES Fits: 3.7L V6 | C393 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Center Lower | View on Amazon |
| INA Fits: 3.7L V6 | ZCC393 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Link Quantity: 70Timing Chain Type: Silent Chain | View on Amazon |
| INA Fits: 3.7L V6 | ZCC194 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Timing Chain Type: Roller Chain | View on Amazon |
| MELLING Fits: 3.7L V6 | 194 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Secondary Timing Chain | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.7L V6 | C194 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | UpperSecondary Timing Chain | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.7L V6 | C393 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LowerPrimary Timing Chain | View on Amazon |
| S.A. GEAR Fits: 3.7L V6 | C194 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Secondary | View on Amazon |
This table covers the timing chains that keep the cams in time with the crank.
10 Timing Chain parts are listed for the 2005 Jeep Liberty, from MELLING, S.A. GEAR, CLOYES and 2 other brands. MELLING 393 carries the "Popular" badge.
Timing Chain & Component Kit
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.7L V6 | 3393SBH | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Service GradeDoes Not Include Sprockets | View on Amazon |
| S.A. GEAR Popular Fits: 3.7L V6 | 76144 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include SprocketsIncludes 3 Chains, 2 Guides, 2 Tensioner Arms, 3 Tensioners | View on Amazon |
| GATES Fits: 3.7L V6 | CHK106 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes 3 Timing Chains, 3 Tensioners, 4 Guides | View on Amazon |
| GATES Fits: 3.7L V6 | CHK106A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes 3 Timing Chains, 3 Tensioners, 4 Guides, VVT Sprockets, Primary Sprockets | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 3.7L V6 | 05397380 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 3.7L V6 | TS22393 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Sprockets Not Included | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.7L V6 | TS12395 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Secondary Idler Sprocket and Balance Shaft Sprockets Not Included | View on Amazon |
| S.A. GEAR Fits: 3.7L V6 | 76106 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes 2 Camshaft Sprockets, 3 Chains, Crank Sprocket, 2 Guides, Idler Sprocket, 2 Tensioner Arms, 3 Tensioners | View on Amazon |
| SKP Fits: 3.7L V6 | SK90393SB | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes NGC Target Controller (Target Wheel), Electro Magnetic Reader, Camshaft Sprocket (2), Crankshaft Sprocket, Idler Sprocket, Chain (2), Tensioner (3), Guide (2), Tensioner Arm (2) | View on Amazon |
| ULTRA-POWER Fits: 3.7L V6 | 90393SB | 🇺🇸 US 🇨🇦 CA | Electro Magnetic Readerwith NGC Target Controller (Target Wheel) | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 3.7L V6 | 90393SB | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes: Timing Chain (3), Timing Chain Tensioner (3), Timing Chain Guide (2), Timing Chain Tensioner Guide (2), Crankshaft Sprocket, Camshaft Sprocket (2), Timing Idler Sprocket | View on Amazon |
| ENGINETECH Popular Fits: 3.7L V6 | TS2500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include Sprockets | View on Amazon |
| CLOYES Fits: 3.7L V6 | 90393SC | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include SprocketsIncludes: Timing Chain (3), Timing Chain Tensioner (3), Timing Chain Guide (2), Timing Chain Tensioner Guide (2) | View on Amazon |
| INA Fits: 3.7L V6 | ZC90393SC | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes 3 Chains, 2 Guides, 2 Tensioner Arms, 3 TensionersDoes Not Include Cam Sprocket | View on Amazon |
| INA Fits: 3.7L V6 | ZC90393SB | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes 2 CAM Sprocket, 3 Chains, 1 Crank Sprocket, 2 Guides, Idler Sprocket, 2 Tens. Arms, 3 Tensioners | View on Amazon |
| MELLING Fits: 3.7L V6 | 3393SB | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include Sprockets | View on Amazon |
| MELLING Fits: 3.7L V6 | 3393SD | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Camshaft Sprocket with NGC Target Wheel | View on Amazon |
| MELLING Fits: 3.7L V6 | 3393SDWP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Water Pump | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| INA Fits: 2.4L L4 | ZC94191SA | 🇺🇸 US 🇨🇦 CA | Includes 2 Balance Shaft Sprocket, 1 Chain, 1 Guide, 1 TensionerDoes Not Include Cam Sprocket | View on Amazon |
This table covers kits that group a timing chain with the related tensioners and guides.
19 Timing Chain & Component Kit parts for the 2005 Jeep Liberty come from 10 brands — MELLING, INA, S.A. GEAR and 7 other brands. The "Popular" part is MELLING 3393SBH.
The Economy section: 10 options from S.A. GEAR, GATES, PREFERRED COMPONENTS INC and 4 other brands. MELLING 3393SBH is listed in this group.
Standard Replacement: 8 parts, from MELLING, CLOYES, INA and 1 other brand. A representative part number is CLOYES 90393SB.
1 further part sits outside the graded sections, with the same engine-level match.
Timing Chain Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 3.7L V6 | 53021226AA | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the gaskets that seal the Timing Chain Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2005 Jeep Liberty — MOPAR 53021226AA.
Timing Chain Guide / Damper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| S.A. GEAR Popular Fits: 3.7L V6 | 7435 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| S.A. GEAR Popular Fits: 3.7L V6 | 7434 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| S.A. GEAR Popular Fits: 3.7L V6 | 9433 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner ArmArm | View on Amazon |
| CLOYES Fits: 3.7L V6 | 95457 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Guide | View on Amazon |
| CLOYES Fits: 3.7L V6 | 95458 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Guide | View on Amazon |
| CLOYES Fits: 3.7L V6 | 95456 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner Arm | View on Amazon |
| INA Fits: 3.7L V6 | ZG95457 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| INA Fits: 3.7L V6 | ZG95458 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| INA Fits: 3.7L V6 | ZG95456 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner Arm | View on Amazon |
| MELLING Fits: 3.7L V6 | BG434 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightSecondary Timing Chain Guide | View on Amazon |
| MELLING Fits: 3.7L V6 | BG435 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LeftSecondary Timing Chain Guide | View on Amazon |
| MELLING Fits: 3.7L V6 | BT433 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Secondary Chain Tensioner Arm | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.7L V6 | R75434 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.7L V6 | R75435 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.7L V6 | R75433 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner Arm | View on Amazon |
This table covers the guides and dampers that keep the timing chain on its path.
15 Timing Chain Guide / Damper parts are listed for the 2005 Jeep Liberty, from S.A. GEAR, CLOYES, INA and 2 other brands. S.A. GEAR 7435 carries the "Popular" badge.
Timing Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.7L V6 | TT5423 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Metal Plate with 2 Chain Guides | View on Amazon |
| S.A. GEAR Popular Fits: 3.7L V6 | 9418 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PRIMARY | View on Amazon |
| S.A. GEAR Popular Fits: 3.7L V6 | 9432 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| S.A. GEAR Popular Fits: 3.7L V6 | 9431 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| CLOYES Fits: 3.7L V6 | 95423 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Center | View on Amazon |
| CLOYES Fits: 3.7L V6 | 95455 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left Upper | View on Amazon |
| CLOYES Fits: 3.7L V6 | 95454 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right Upper | View on Amazon |
| INA Fits: 3.7L V6 | ZT95423 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PRIMARY | View on Amazon |
| INA Fits: 3.7L V6 | ZT95455 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| INA Fits: 3.7L V6 | ZT95454 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| MELLING Fits: 3.7L V6 | BT418 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PRIMARY | View on Amazon |
| MELLING Fits: 3.7L V6 | BT431 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightSecondary | View on Amazon |
| MELLING Fits: 3.7L V6 | BT432 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LeftSecondary | View on Amazon |
| MOPAR Fits: 2.4L L4 | 4884473AA | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MOPAR Fits: 3.7L V6 | 53020681 | 🇺🇸 US 🇨🇦 CA | Primary | View on Amazon |
| MOPAR Fits: 3.7L V6 | 53021250AA | 🇺🇸 US 🇨🇦 CA | LeftSecondary | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.7L V6 | T65423 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | CenterPrimary | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.7L V6 | T66431 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightSecondary | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.7L V6 | T66432 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LeftSecondary | View on Amazon |
This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
19 Timing Chain Tensioner parts for the 2005 Jeep Liberty come from 7 brands — S.A. GEAR, CLOYES, INA and 4 other brands. The "Popular" part is ENGINETECH TT5423.
Timing Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 3.7L V6 | 53021231AD | 🇺🇸 US 🇨🇦 CA | 104.2" wheelbase4WD | View on Amazon |
This table covers the Timing covers.
One part is listed for the 2005 Jeep Liberty — MOPAR 53021231AD.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.7L V6 | TCS46022 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RTV Sealant Included for Timing Cover Gasket | View on Amazon |
| SKP Popular Fits: 3.7L V6 | SKTCG003 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| APEX Fits: 3.7L V6 | ATC2740 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ENGINETECH Fits: 3.7L V6 | TCCR226A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FEL-PRO Fits: 3.7L V6 | TCS46022T | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Permadryplus Speedfit Timing Cover Gasket | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | JV5137 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| VICTOR REINZ Fits: 3.7L V6 | 151021001 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
7 Timing Cover Gasket parts for the 2005 Jeep Liberty come from 6 brands — FEL-PRO, SKP, APEX and 3 other brands. The "Popular" part is FEL-PRO TCS46022.
Listed part numbers: FEL-PRO TCS46022, SKP SKTCG003 and APEX ATC2740, plus the other parts above.
Timing Cover Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.4L L4 | 16224 | 🇺🇸 US 🇨🇦 CA | Use with Installation Tool | View on Amazon |
| SKF Fits: 2.4L L4 | 99128 | 🇺🇸 US 🇨🇦 CA | Shaft Diameter: 1.260 In | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 711347900 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the wear sleeves used to restore a Timing Cover seal surface.
3 Timing Cover Repair Sleeve parts for the 2005 Jeep Liberty come from 3 brands — FEL-PRO, SKF and VICTOR REINZ.
This group includes FEL-PRO 16224, SKF 99128 and VICTOR REINZ 711347900.
Timing Cover Repair Sleeve Tool
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.4L L4 | 16325 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 2.4L L4 | 711646700 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Timing Cover Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes.
2 Timing Cover Repair Sleeve Tool parts for the 2005 Jeep Liberty come from 2 brands — FEL-PRO and VICTOR REINZ.
Listed part numbers: FEL-PRO 16325 and VICTOR REINZ 711646700.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 2.4L L4 | 68011 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | 67629 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber | View on Amazon |
| SCHAEFFLER Fits: 2.4L L4 | SS2343 | 🇺🇸 US 🇨🇦 CA | DOHC1.78" O.D. X 0.24" Width | View on Amazon |
| SKF Fits: 2.4L L4 | 12717 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKF Fits: 3.7L V6 | 18096 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
5 Timing Cover Seal parts for the 2005 Jeep Liberty come from 3 brands — MAHLE / CLEVITE, SKF and SCHAEFFLER.
Listed part numbers: MAHLE / CLEVITE 68011, MAHLE / CLEVITE 67629 and SCHAEFFLER SS2343, plus the other parts above.
Timing Crank Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.7L V6 | S861 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| S.A. GEAR Popular Fits: 3.7L V6 | S861 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| CLOYES Fits: 2.4L L4 | S803 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 3.7L V6 | S861 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OuterRequires Silent Type Chain | View on Amazon |
| FVP Fits: 2.4L L4 | S803 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| INA Fits: 2.4L L4 | ZSS803 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| INA Fits: 3.7L V6 | ZSS861 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MOPAR Fits: 3.7L V6 | 53020679 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 2.4L L4 | G55803 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 3.7L V6 | G55861 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the crankshaft sprockets that drive the timing chain or belt.
10 Timing Crank Sprocket parts for the 2005 Jeep Liberty come from 7 brands — CLOYES, INA, PREFERRED COMPONENTS INC and 4 other brands. The "Popular" part is MELLING S861.
Timing Idler
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 2.4L L4 | 95542 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKP Popular Fits: 2.4L L4 | SKT42121 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ULTRA-POWER Popular Fits: 2.4L L4 | T42121 | 🇺🇸 US 🇨🇦 CA | Timing Idler Or PulleyIDLER | View on Amazon |
| ACDELCO Fits: 2.4L L4 | T42121 | 🇺🇸 US 🇨🇦 CA | Professional / GoldSteel Smooth/Backside (58mm x N/A x 35.2mm) - with Bolt | View on Amazon |
| CONTINENTAL Fits: 2.4L L4 | 48201 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DAYCO Fits: 2.4L L4 | 84102 | 🇺🇸 US 🇨🇦 CA | Includes: Camshaft Belt Tensioner, Camshaft Belt Idler (Hydraulic Actuator Not Included) | View on Amazon |
| GATES Fits: 2.4L L4 | T42121 | 🇺🇸 US 🇨🇦 CA | Timing Belt PulleySteel Smooth/Backside (58mm x N/A x 35.2mm) - with Bolt | View on Amazon |
| GMB Fits: 2.4L L4 | 4209530 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| INA Fits: 2.4L L4 | ZP95542 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 2.4L L4 | T66042 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 2.4L L4 | 9611 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| SKF Fits: 2.4L L4 | TBP51007 | 🇺🇸 US 🇨🇦 CA | Includes Housing | View on Amazon |
This table covers the Timing idlers. Typical signs include a chirp that follows engine speed, or an idler that feels rough or has play. Replace a noisy idler with the belt — the labor is already paid for.
12 Timing Idler parts for the 2005 Jeep Liberty come from 12 brands — CLOYES, SKP, ULTRA-POWER and 9 other brands. The "Popular" part is CLOYES 95542.
Timing Idler Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.7L V6 | S863 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PrimaryDoes Not Include Idler Gear Shaft | View on Amazon |
| S.A. GEAR Popular Fits: 3.7L V6 | S863 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PRIMARY | View on Amazon |
| CLOYES Fits: 3.7L V6 | S863A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Complete Assembly | View on Amazon |
| INA Fits: 3.7L V6 | ZSS864 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Secondary | View on Amazon |
| INA Fits: 3.7L V6 | ZSS863A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PRIMARY | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.7L V6 | G55863 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PRIMARY | View on Amazon |
| S.A. GEAR Fits: 3.7L V6 | S864 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Secondary | View on Amazon |
This table covers the Timing Idler sprockets.
7 Timing Idler Sprocket parts are listed for the 2005 Jeep Liberty, from S.A. GEAR, INA, MELLING and 2 other brands. MELLING S863 carries the "Popular" badge.
Listed part numbers: MELLING S863 and CLOYES S863A, plus the other parts above.
Valve Adjuster
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 3.7L V6 | 53021894AA | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the adjusters that set valve lash.
This group shows a single part: MOPAR 53021894AA.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 3.7L V6 | SK510A09 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| SKP Popular Fits: 3.7L V6 | SK510A10 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| APEX Fits: 3.7L V6 | VCS282R | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Gasket and Screws | View on Amazon |
| APEX Fits: 3.7L V6 | VCS282L | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Gasket and Screws | View on Amazon |
| AUTOTECNICA Fits: 3.7L V6 | CY1416692 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| AUTOTECNICA Fits: 3.7L V6 | CY1416693 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| MOPAR Fits: 3.7L V6 | 53021937AC | 🇺🇸 US 🇨🇦 CA | LeftPlastic Cover, with Gasket and Screws | View on Amazon |
This table covers the Valve covers.
7 Valve Cover parts are listed for the 2005 Jeep Liberty, from SKP, APEX, AUTOTECNICA and 1 other brand. SKP SK510A09 carries the "Popular" badge.
This group includes SKP SK510A09, SKP SK510A10 and APEX VCS282R and the remaining parts above.
Valve Cover Gasket
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ Fits: 3.7L V6 | 151068501 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetIncludes Grommets | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.7L V6 | VS50652R | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Permadry Molded RubberIncludes Valve Cover Grommets | View on Amazon |
| FEL-PRO Popular Fits: 3.7L V6 | VS50594R | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Permadry Molded RubberIncludes Valve Cover Grommets | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.7L V6 | VS50407 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMolded Rubber | View on Amazon |
| ULTRA-POWER Popular Fits: 3.7L V6 | VS50652R | 🇺🇸 US 🇨🇦 CA | SetIncludes Molded Rubber Gasket(s), Valve Cover Grommets | View on Amazon |
| APEX Fits: 3.7L V6 | AVC282S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Grommets | View on Amazon |
| APEX Fits: 3.7L V6 | AVC274S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Grommets | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | VCCR226B | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | VCCR226A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | VS50325 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMolded Rubber | View on Amazon |
| SKP Fits: 3.7L V6 | SKVCG002 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left Hand and Right Hand | View on Amazon |
| SKP Fits: 3.7L V6 | SKVCG004 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VICTOR REINZ Fits: 3.7L V6 | 711043200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| VICTOR REINZ Fits: 3.7L V6 | 711043300 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| VICTOR REINZ Fits: 3.7L V6 | 151071401 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetIncludes Grommets | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.4L L4 | VCCR24B | 🇺🇸 US 🇨🇦 CA | SetIncludes Spark Plug Seals | View on Amazon |
| FEL-PRO Popular Fits: 2.4L L4 | VS50518R | 🇺🇸 US 🇨🇦 CA | Permadry Molded RubberIncludes Spark Plug Tube Seals | View on Amazon |
| AJUSA Fits: 2.4L L4 | 56030200 | 🇺🇸 US 🇨🇦 CA | Engine EDO | View on Amazon |
| APEX Fits: 2.4L L4 | AVC247S | 🇺🇸 US 🇨🇦 CA | Includes Spark Plug Tube Seals | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 2.4L L4 | 0939838 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 2.4L L4 | VS50354 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| MOPAR Fits: 3.7L V6 | 53021959AA | 🇺🇸 US 🇨🇦 CA | LeftUse with Plastic Cylinder Head Covers | View on Amazon |
| MOPAR Fits: 3.7L V6 | 53021958AA | 🇺🇸 US 🇨🇦 CA | RightUse with Plastic Cylinder Head Covers | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 151057701 | 🇺🇸 US 🇨🇦 CA | SetIncludes Spark Plug Tube Seals | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
24 Valve Cover Gasket parts for the 2005 Jeep Liberty come from 10 brands — VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 7 other brands. The "Popular" part is FEL-PRO VS50652R.
Premium: 1 part, from VICTOR REINZ. A representative part number is VICTOR REINZ 151068501.
Standard Replacement: 14 parts, from VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 4 other brands. A representative part number is FEL-PRO VS50652R.
9 further parts sit outside the graded sections, with the same engine-level match.
Valve Cover Grommet
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.4L L4 | ES73026 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | GS33846 | 🇺🇸 US 🇨🇦 CA | KitSet | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 151013301 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the Valve Cover grommets.
3 Valve Cover Grommet parts for the 2005 Jeep Liberty come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
This group includes FEL-PRO ES73026, MAHLE / CLEVITE GS33846 and VICTOR REINZ 151013301.
Valve Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.4L L4 | GD8556 | 🇺🇸 US 🇨🇦 CA | Iron | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | GD3026 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Iron | View on Amazon |
| MOPAR Fits: 2.4L L4 | 4667411 | 🇺🇸 US 🇨🇦 CA | 104.2" wheelbase | View on Amazon |
| QUALCAST Fits: 2.4L L4 | 308556 | 🇺🇸 US 🇨🇦 CA | 1.735 OAL 0.436 O.D. 0.236 I.D. | View on Amazon |
| QUALCAST Fits: 3.7L V6 | 303026 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.702 OAL | View on Amazon |
| SBI Fits: 2.4L L4 | 1408556 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2355 I.D. | View on Amazon |
| TOPLINE Fits: 2.4L L4 | VGC26 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.
7 Valve Guide parts for the 2005 Jeep Liberty come from 5 brands — ENGINETECH, QUALCAST, MOPAR and 2 other brands.
Listed part numbers: ENGINETECH GD8556, ENGINETECH GD3026 and MOPAR 4667411, plus the other parts above.
Valve Lifter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ULTRA-POWER Popular Fits: 3.7L V6 | JB7520 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.7L V6 | L2308 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hydraulic | View on Amazon |
| MELLING Fits: 3.7L V6 | JB7520 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hydraulic | View on Amazon |
| QUALCAST Fits: 3.7L V6 | 362271 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hydraulic Lash Adjuster | View on Amazon |
| SEALED POWER Fits: 3.7L V6 | HT2308 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Outside Diameter (In): 0.6305 In | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.4L L4 | L2278 | 🇺🇸 US 🇨🇦 CA | Hydraulic | View on Amazon |
| MELLING Popular Fits: 2.4L L4 | JB2240 | 🇺🇸 US 🇨🇦 CA | Hydraulic | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 2.4L L4 | 0565149 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| QUALCAST Fits: 2.4L L4 | 362278 | 🇺🇸 US 🇨🇦 CA | Hydraulic | View on Amazon |
| SBI Fits: 2.4L L4 | VL173 | 🇺🇸 US 🇨🇦 CA | Hydraulic Lash Adjuster Type | View on Amazon |
| SEALED POWER Fits: 2.4L L4 | HT2278 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| TOPLINE Fits: 2.4L L4 | LIFC28 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
12 Valve Lifter parts for the 2005 Jeep Liberty come from 8 brands — ENGINETECH, MELLING, QUALCAST and 5 other brands. The "Popular" part is ULTRA-POWER JB7520.
The Economy section: 1 option from ULTRA-POWER. ULTRA-POWER JB7520 is listed in this group.
Standard Replacement: 4 parts, from ENGINETECH, MELLING, QUALCAST and 1 other brand. A representative part number is ENGINETECH L2308.
7 further parts sit outside the graded sections, with the same engine-level match.
Valve Seat
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.7L V6 | ST150050 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hi-Chrome1.203/1.266T X 1.5042 X .2800 | View on Amazon |
| ENGINETECH Popular Fits: 3.7L V6 | ST200051 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hi-ChromeOutside Diameter: 2.0042 | View on Amazon |
| DURA-BOND Fits: 3.7L V6 | 31286 | 🇺🇸 US 🇨🇦 CA | ExhaustAlternate O.D., Check Casting Before Use | View on Amazon |
| ENGINETECH Fits: 2.4L L4 | ST150077 | 🇺🇸 US 🇨🇦 CA | Hi-Chrome1.175/1.235T X 1.5042 X .2360 | View on Amazon |
| QUALCAST Fits: 2.4L L4 | 21125063 | 🇺🇸 US 🇨🇦 CA | INSERT | View on Amazon |
| QUALCAST Fits: 2.4L L4 | 21150077 | 🇺🇸 US 🇨🇦 CA | INSERT | View on Amazon |
| QUALCAST Fits: 3.7L V6 | 21156266 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | INSERT | View on Amazon |
| QUALCAST Fits: 3.7L V6 | 21150050 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | INSERT | View on Amazon |
| QUALCAST Fits: 3.7L V6 | 21200051 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | INSERT | View on Amazon |
| SBI Fits: 2.4L L4 | SB150077 | 🇺🇸 US 🇨🇦 CA | High ChromeFor Aluminum Cylinder Head | View on Amazon |
This table covers the Valve seats.
10 Valve Seat parts are listed for the 2005 Jeep Liberty, from QUALCAST, ENGINETECH, DURA-BOND and 1 other brand. ENGINETECH ST150050 carries the "Popular" badge.
Valve Spring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.7L V6 | VS1612 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake | View on Amazon |
| MOPAR Popular Fits: 3.7L V6 | 53021887AA | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | ERV1614 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| ENGINETECH Fits: 3.7L V6 | ERV1612 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Conical | View on Amazon |
| MELLING Fits: 3.7L V6 | VS1614 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| QUALCAST Fits: 2.4L L4 | 322230 | 🇺🇸 US 🇨🇦 CA | 1.905 Free Length | View on Amazon |
| QUALCAST Fits: 3.7L V6 | 322482 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.950 Free Length. Revised Conical Design | View on Amazon |
| SBI Fits: 2.4L L4 | 1601426 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust1.933 Length | View on Amazon |
This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.
8 Valve Spring parts are listed for the 2005 Jeep Liberty, from MELLING, ENGINETECH, QUALCAST and 2 other brands. MELLING VS1612 carries the "Popular" badge.
Part numbers include MELLING VS1612, MOPAR 53021887AA and ENGINETECH ERV1614, among others listed above.
Valve Spring Retainer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 3.7L V6 | VSR705 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MOPAR Fits: 3.7L V6 | 4781090AA | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| QUALCAST Fits: 3.7L V6 | 556197 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Chrome Moly. 0.980 O.D. 7mm Stem | View on Amazon |
This table covers the Valve Spring retainers.
3 Valve Spring Retainer parts are listed for the 2005 Jeep Liberty, from MELLING, MOPAR and QUALCAST.
This group includes MELLING VSR705, MOPAR 4781090AA and QUALCAST 556197.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 3.7L V6 | VL1093 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MOPAR Fits: 3.7L V6 | 53022277AA | 🇺🇸 US 🇨🇦 CA | 104.2" wheelbase4WD | View on Amazon |
| QUALCAST Fits: 2.4L L4 | 3407050 | 🇺🇸 US 🇨🇦 CA | 3 Groove | View on Amazon |
| QUALCAST Fits: 3.7L V6 | 3406513 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 3 Round Beads. 0.273 Stem DIA. | View on Amazon |
| SBI Fits: 2.4L L4 | 1211087 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2900 Length | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
5 Valve Spring Retainer Keeper parts are listed for the 2005 Jeep Liberty, from QUALCAST, MELLING, MOPAR and 1 other brand.
This group includes MELLING VL1093, MOPAR 53022277AA and QUALCAST 3407050 and the remaining parts above.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.4L L4 | S20NV | 🇺🇸 US 🇨🇦 CA | Viton | View on Amazon |
| ENGINETECH Popular Fits: 3.7L V6 | S470V | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Viton | View on Amazon |
| FEL-PRO Popular Fits: 2.4L L4 | SS72871 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| FEL-PRO Popular Fits: 3.7L V6 | SS710411 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| APEX Fits: 2.4L L4 | AVS11003 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| APEX Fits: 3.7L V6 | AVS2074 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 2.4L L4 | SS45844 | 🇺🇸 US 🇨🇦 CA | SetMetal with Molded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 3.7L V6 | SS45909A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMetal with Molded Rubber | View on Amazon |
| MOPAR Fits: 2.4L L4 | 4648619 | 🇺🇸 US 🇨🇦 CA | .015" oversize | View on Amazon |
| MOPAR Fits: 3.7L V6 | 53021974AA | 🇺🇸 US 🇨🇦 CA | Sold Individually | View on Amazon |
| QUALCAST Fits: 2.4L L4 | 382045 | 🇺🇸 US 🇨🇦 CA | Viton Top Hat | View on Amazon |
| QUALCAST Fits: 3.7L V6 | 3875245 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Viton Top Hat | View on Amazon |
| SBI Fits: 2.4L L4 | 1221251 | 🇺🇸 US 🇨🇦 CA | Intake and ExhaustViton Material | View on Amazon |
| TOPLINE Fits: 2.4L L4 | VSSC26 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 2.4L L4 | 121002601 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ Fits: 3.7L V6 | 121003201 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetContains 12 Pieces | View on Amazon |
| VICTOR REINZ Fits: 3.7L V6 | 121003001 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetContains 16 Pieces | View on Amazon |
| VICTOR REINZ Fits: 3.7L V6 | 121944801 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetContains 16 Pieces | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
18 Valve Stem Seal parts for the 2005 Jeep Liberty come from 9 brands — VICTOR REINZ, ENGINETECH, FEL-PRO and 6 other brands. The "Popular" part is ENGINETECH S20NV.
Buying Engine Parts for a 2005 Jeep Liberty
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Crankshaft Seal and Oil Filter .
Frequently Asked Questions
How many engine parts fit the 2005 Jeep Liberty?
Our catalog currently lists 819 engine parts for the 2005 Jeep Liberty across 91 subcategories and 75 brands, covering all 3 engine options (2.4L L4, 2.8L L4 DIESEL Turbocharged and 3.7L V6). Each part is matched to the engine(s) it fits.
Do engine parts differ between 2005 Jeep Liberty engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2005 Jeep Liberty?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2005 Jeep Liberty?
Oil rows on this page include SAE 5W-30 and SAE 10W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2005 Jeep Liberty was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2005 Jeep Liberty?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2005 Jeep Liberty
Engine Parts for Other Jeep Liberty Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.