2013 Jeep Liberty Engine Parts

This table covers the camshafts that open the valves. Read more

2 Camshaft parts for the 2013 Jeep Liberty come from MELLING.

This group includes MELLING MC1400L and MELLING MC1400R.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS CS2101BB.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS CR6822SI.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 54153900.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2013 Jeep Liberty — KING ENGINE BEARINGS MB4102SI.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

AJUSA supplies both parts for the 2013 Jeep Liberty.

This group includes AJUSA 15086200 and AJUSA 15086300.

This table covers the cylinder heads that close the top of the block. Read more

CYLINDER HEAD EXPRESS supplies both parts for the 2013 Jeep Liberty.

Part numbers include CYLINDER HEAD EXPRESS CI212BL and CYLINDER HEAD EXPRESS CI213BR.

This table covers the bolts that clamp the cylinder head to the block. Read more

This group shows a single part: AJUSA 81052300.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts for the 2013 Jeep Liberty come from 2 brands — AJUSA and VICTOR REINZ. The "Popular" part is VICTOR REINZ 611037600.

This group includes VICTOR REINZ 611037600, AJUSA 10217900 and AJUSA 52427800 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 52427700.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50389700.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2013 Jeep Liberty — MELLING V5560.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

This group shows a single part: DORMAN 594191.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 77023200.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2013 Jeep Liberty — AJUSA 13200500.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Intake Valve parts are listed for the 2013 Jeep Liberty, from MELLING and SKP.

This group includes MELLING V1918 and SKP SKV1918.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2013 Jeep Liberty come from HAYDEN.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

8 Oil Filter parts are listed for the 2013 Jeep Liberty, from VARIOUS MFR, WIX, FVP and 3 other brands. WIX 51516XP carries the "Popular" badge.

In the Economy grade, FVP, PRO-TEC and VARIOUS MFR supply 3 parts: the catalog's value-priced group. A representative part number is FVP R1516.

In the High Performance / Heavy Duty grade, WIX supplies 1 part: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 51516XP.

The Standard Replacement section lists 4 options from WIX, ACDELCO, MANN and 1 other brand — built to original-equipment specification. WIX 51516 is listed in this group.

This group includes WIX 51516XP, FVP R1516 and PRO-TEC PXL51516 and the remaining parts above.

This table covers the oil pans that hold the engine's oil sump. Read more

4 Oil Pan parts for the 2013 Jeep Liberty come from 4 brands — AUTOTECNICA, DORMAN, SKP and 1 other brand.

This group includes AUTOTECNICA CY1416241, DORMAN 264249 and SKP SK264249 and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pan Gasket parts are listed for the 2013 Jeep Liberty, from AJUSA and VICTOR REINZ.

This group includes AJUSA 14091700, AJUSA 59019800 and VICTOR REINZ 101022001.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Oil Pump parts are listed for the 2013 Jeep Liberty, from SKP, MELLING and SEALED POWER.

Economy: 1 part, from SKP. A representative part number is SKP SKOM297.

The Standard Replacement section: 2 options from MELLING and SEALED POWER. MELLING M297 is listed in this group.

Listed part numbers: SKP SKOM297, MELLING M297 and SEALED POWER 22443647.

This table covers the rings that seal each piston to the cylinder wall. Read more

This group shows a single part: MAHLE / CLEVITE 41860CP.

This table covers the Thrust washers. Read more

One part is listed for the 2013 Jeep Liberty — KING ENGINE BEARINGS TW167AM.

This table covers the Timing Cam sprockets. Read more

6 Timing Cam Sprocket parts are listed for the 2013 Jeep Liberty, from CLOYES, FVP and MELLING. CLOYES S824 carries the "Popular" badge.

This group includes CLOYES S824 and CLOYES S868 and the remaining parts above.

This table covers the timing chains that keep the cams in time with the crank. Read more

5 Timing Chain parts for the 2013 Jeep Liberty come from 3 brands — MELLING, CLOYES and PREFERRED COMPONENTS INC. The "Popular" part is MELLING 393.

This group includes MELLING 393, CLOYES C194 and CLOYES C393 and the remaining parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

6 Timing Chain & Component Kit parts are listed for the 2013 Jeep Liberty, from MELLING, CLOYES and SKP. MELLING 3393SBH carries the "Popular" badge.

Economy: 2 parts, from MELLING and SKP. A representative part number is MELLING 3393SBH.

The Standard Replacement section: 4 options from CLOYES and MELLING. CLOYES 90393SB is listed in this group.

This group includes MELLING 3393SBH, SKP SK90393SB and CLOYES 90393SB and the remaining parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

6 Timing Chain Guide / Damper parts for the 2013 Jeep Liberty come from 2 brands — MELLING and CLOYES. The "Popular" part is MELLING BG434.

This group includes MELLING BG434, MELLING BG435 and CLOYES 95457 and the remaining parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

9 Timing Chain Tensioner parts are listed for the 2013 Jeep Liberty, from MELLING, CLOYES and PREFERRED COMPONENTS INC. MELLING BT418 carries the "Popular" badge.

Part numbers include MELLING BT418, MELLING BT431 and CLOYES 95423, among others listed above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Timing Cover Gasket parts are listed for the 2013 Jeep Liberty, from AJUSA and VICTOR REINZ.

Listed part numbers: AJUSA 01163400 and VICTOR REINZ 151021001.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

3 Timing Crank Sprocket parts are listed for the 2013 Jeep Liberty, from CLOYES, FVP and MELLING.

Listed part numbers: CLOYES S861, plus the other parts above.

This table covers the Timing Idler sprockets. Read more

3 Timing Idler Sprocket parts for the 2013 Jeep Liberty come from 3 brands — CLOYES, FVP and MELLING.

This group includes CLOYES S863A and MELLING S863 and the remaining parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Valve Cover Gasket parts are listed for the 2013 Jeep Liberty, from AJUSA and VICTOR REINZ.

This group includes AJUSA 11111900, AJUSA 11112000 and VICTOR REINZ 151071401.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

3 Valve Lifter parts are listed for the 2013 Jeep Liberty, from AJUSA, MELLING and SEALED POWER.

Part numbers include AJUSA 85018600, MELLING JB7520 and SEALED POWER HT2308.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

This group shows a single part: MELLING VL1093.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

AJUSA supplies both parts for the 2013 Jeep Liberty.

Part numbers include AJUSA 12023000 and AJUSA 57055100.