The 2022 Jeep Gladiator has 180 drivetrain parts with verified fitment on this page — 46 part types and 20 brands, covering both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6. Each part includes a manufacturer part number and application notes.
On the 2022 Jeep Gladiator, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. Most of the listed parts are Universal Joint (16 parts), Axle Shaft (14 parts) and Transfer Case Fluid (14 parts). The other 43 part types cover the remaining 136 parts.
The 2022 Jeep Gladiator was sold with both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6. 159 parts fit every engine; the other 21 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2022 Jeep Gladiator drivetrain parts are DANA (62 parts), MOPAR (52 parts) and USA STANDARD GEAR (14 parts), plus 17 more brands. Quality grades include Standard Replacement, Heavy Duty and Master Kit.
24 parts on this 2022 Jeep Gladiator page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including DANA 10025733 (Axle Shaft) and DANA 10132530 (Differential Carrier). Click any part number to see every vehicle that part fits.
4WD Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2022 Gladiator engines | 68391561AB | 🇺🇸 US 🇨🇦 CA | Fits Dana M210 Wide Front Axle, 3.73 Rear Axle Ratio, Conventional Differential Front Axle, Selec-Trac Full Time 4WD SystemCrew Cab Crew Cab | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 68391561AA | 🇺🇸 US 🇨🇦 CA | Fits Dana M210 Wide Front Axle, 3.73 Rear Axle Ratio, Conventional Differential Front Axle, Selec-Trac Full Time 4WD SystemCrew Cab Crew Cab | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 2022 Gladiator engines | TCA119 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Axle Lock Switch | View on Amazon |
This table covers the actuators that engage four-wheel drive at the transfer case or axle. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
3 4WD Actuator parts are listed for the 2022 Jeep Gladiator, from MOPAR and STANDARD MOTOR PRODUCTS. All of them fit every engine offered in the 2022 Gladiator.
Part numbers include MOPAR 68391561AB, MOPAR 68391561AA and STANDARD MOTOR PRODUCTS TCA119.
Axle / Differential Assembly
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2022 Gladiator engines | 10047715 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10047716 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10047717 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10047718 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10047719 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
This table covers the Axle / Differential assemblies.
DANA supplies the 5 Axle / Differential Assembly parts for the 2022 Jeep Gladiator. All of them fit every engine offered in the 2022 Gladiator.
Part numbers include DANA 10047715, DANA 10047716 and DANA 10047717, among others listed above.
Axle Housing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2022 Gladiator engines | 68472646AA | 🇺🇸 US 🇨🇦 CA | Fits Rear3.73 Rear Axle Ratio, Dana M70/267MM Rear Axle, Conventional Differential Rear Axle, Anti-Lock 4-Wheel Disc HD Brakes | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 68474076AA | 🇺🇸 US 🇨🇦 CA | Fits Rear3.73 Rear Axle Ratio, Dana M70/267MM Rear Axle, Anti-Spin Differential Rear Axle, Anti-Lock 4-Wheel Disc HD Brakes | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 68474093AA | 🇺🇸 US 🇨🇦 CA | Fits Rear3.73 Rear Axle Ratio, Dana M220 Wide Rear Axle, Conventional Differential Rear Axle, Anti-Lock 4-Wheel Disc HD Brakes | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 68474170AA | 🇺🇸 US 🇨🇦 CA | Fits Rear3.73 Rear Axle Ratio, Dana M220 Wide Rear Axle, Anti-Spin Differential Rear Axle, Anti-Lock 4-Wheel Disc Brakes | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 68474262AA | 🇺🇸 US 🇨🇦 CA | Fits Rear4.10 Rear Axle Ratio, Dana M220 Wide Rear Axle, TRU-LOK Front & Rear Axles, Anti-Lock 4-Wheel Disc HD Brakes | View on Amazon |
This table covers the Axle housings.
5 Axle Housing parts for the 2022 Jeep Gladiator come from MOPAR. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
Listed part numbers: MOPAR 68472646AA, MOPAR 68474076AA and MOPAR 68474093AA, plus the other parts above.
Axle Shaft
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Fits: all 2022 Gladiator engines | SK68400738AA | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits RightFront | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular Fits: all 2022 Gladiator engines | 10025733 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Popular Fits: all 2022 Gladiator engines | 10124518 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| USA STANDARD GEAR Popular Fits: all 2022 Gladiator engines | USA21901 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 4340 Chromoly32 Spline | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 68400739AA | 🇺🇸 US 🇨🇦 CA | Fits Front LeftDana M210 Wide Front Axle, 4.10 Rear Axle Ratio, TRU-LOK Front & Rear Axles, 4:1 Rock-Trac HD Part Time 4WD System | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 68397157AA | 🇺🇸 US 🇨🇦 CA | FrontRight | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 68400738AA | 🇺🇸 US 🇨🇦 CA | Fits RightFront | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 68397156AA | 🇺🇸 US 🇨🇦 CA | FrontLeft | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68403881AA | 🇺🇸 US 🇨🇦 CA | FrontLeft | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68394142AA | 🇺🇸 US 🇨🇦 CA | FrontRight | View on Amazon |
| USA STANDARD GEAR Fits: all 2022 Gladiator engines | USA11880 | 🇺🇸 US | 4340 Chromoly32 Spline | View on Amazon |
| USA STANDARD GEAR Fits: all 2022 Gladiator engines | USA21902 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 4340 Chromoly32 Spline | View on Amazon |
| USA STANDARD GEAR Fits: all 2022 Gladiator engines | USA11881 | 🇺🇸 US | 4340 Chromoly32 Spline | View on Amazon |
| USA STANDARD GEAR Fits: all 2022 Gladiator engines | ZAW24172 | 🇺🇸 US | Chrome-Moly Axle Kit | View on Amazon |
This table covers the Axle shafts.
14 Axle Shaft parts are listed for the 2022 Jeep Gladiator, from MOPAR, USA STANDARD GEAR, DANA and 1 other brand. DANA 10025733 carries the "Popular" badge. 12 parts fit every engine; the other 2 are engine-specific.
In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK68400738AA.
The Standard Replacement section lists 13 options from MOPAR, USA STANDARD GEAR and DANA — built to original-equipment specification. DANA 10025733 is listed in this group.
Axle Shaft Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Fits: all 2022 Gladiator engines | USA10997 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Axle Shaft Bearing Kit | View on Amazon |
This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
One part is listed for the 2022 Jeep Gladiator — USA STANDARD GEAR USA10997.
Axle Shaft Bearing Collar
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2022 Gladiator engines | 68476754AA | 🇺🇸 US 🇨🇦 CA | Fits G3 Start Stop EngineDana M210 Wide Front Axle, 3.73 Rear Axle Ratio, Conventional Differential Front Axle, Selec-Trac Full Time 4WD System | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 68476756AA | 🇺🇸 US 🇨🇦 CA | Fits G3 Start Stop EngineDana M210 Wide Front Axle, 3.73 Rear Axle Ratio, Conventional Differential Front Axle, Selec-Trac Full Time 4WD System | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 68400383AA | 🇺🇸 US 🇨🇦 CA | G3 Start Stop Engine5,500 LB Front Axle with Hub EXT, 3.73 Rear Axle Ratio, Conventional Differential Front Axle, Command-Trac Part Time 4WD System | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 68400382AA | 🇺🇸 US 🇨🇦 CA | G3 Start Stop Engine5,500 LB Front Axle with Hub EXT, 3.73 Rear Axle Ratio, Conventional Differential Front Axle, Command-Trac Part Time 4WD System | View on Amazon |
This table covers the Axle Shaft Bearing collars.
4 Axle Shaft Bearing Collar parts for the 2022 Jeep Gladiator come from MOPAR. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
Part numbers include MOPAR 68476754AA, MOPAR 68476756AA and MOPAR 68400383AA, among others listed above.
Axle Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2022 Gladiator engines | 50381 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| TIMKEN Fits: all 2022 Gladiator engines | SL260501 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right | View on Amazon |
| TIMKEN Fits: all 2022 Gladiator engines | SL260524 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left Outer | View on Amazon |
This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Axle Shaft Seal parts for the 2022 Jeep Gladiator come from 2 brands — TIMKEN and DANA. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
Part numbers include DANA 50381, TIMKEN SL260501 and TIMKEN SL260524.
Axle Shaft Seal Retainer Nut
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2022 Gladiator engines | 630032 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Axle Seal Retainer To Brake Backing Plate | View on Amazon |
This table covers the Axle Shaft Seal Retainer nuts.
One part is listed for the 2022 Jeep Gladiator — DORMAN 630032.
CV Axle
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TRAKMOTIVE Fits: all 2022 Gladiator engines | CH86061 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Rightwith Locking Differential | View on Amazon |
| TRAKMOTIVE Fits: all 2022 Gladiator engines | CH86062 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Leftwith Locking Differential | View on Amazon |
This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.
2 CV Axle parts for the 2022 Jeep Gladiator come from TRAKMOTIVE. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
Part numbers include TRAKMOTIVE CH86061 and TRAKMOTIVE CH86062.
Differential Carrier
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular Fits: all 2022 Gladiator engines | 10132530 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| USA STANDARD GEAR Popular Fits: all 2022 Gladiator engines | USA11177 | 🇺🇸 US 🇨🇦 CA | Limited Slip DifferentialCarrier Case | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10067838 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 68472641AA | 🇺🇸 US 🇨🇦 CA | Fits Differential Assembly, Rear3.73 Rear Axle Ratio, Dana M220 Wide Rear Axle, Conventional Differential Rear Axle, Anti-Lock 4-Wheel Disc HD Brakes | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 68476426AA | 🇺🇸 US 🇨🇦 CA | Fits Differential Assembly, FrontDana M210 Wide Front Axle, 3.73 Rear Axle Ratio, Conventional Differential Front Axle, Selec-Trac Full Time 4WD System | View on Amazon |
| USA STANDARD GEAR Fits: all 2022 Gladiator engines | USA11253 | 🇺🇸 US 🇨🇦 CA | Differential Carrier Case | View on Amazon |
This table covers the carriers that hold the differential gears in the axle.
6 Differential Carrier parts for the 2022 Jeep Gladiator come from 3 brands — DANA, USA STANDARD GEAR and MOPAR. The "Popular" part is DANA 10132530. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
Listed part numbers: DANA 10132530, USA STANDARD GEAR USA11177 and DANA 10067838, plus the other parts above.
Differential Carrier Bearing / Race
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2022 Gladiator engines | 10071915 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
This table covers the bearings and races that support the differential carrier.
This group shows a single part: DANA 10071915.
Differential Carrier Shim
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2022 Gladiator engines | 10040476 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
This table covers the Differential Carrier shims.
One part is listed for the 2022 Jeep Gladiator — DANA 10040476.
Differential Clutch Pack
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2022 Gladiator engines | 10071924 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
This table covers the clutch packs in a limited-slip or locking differential.
This group shows a single part: DANA 10071924.
Differential Control Module
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2022 Gladiator engines | 10179889 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
This table covers the Differential control modules.
One part is listed for the 2022 Jeep Gladiator — DANA 10179889.
Differential Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular Fits: all 2022 Gladiator engines | 10024090 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Gray Nodular Iron | View on Amazon |
| RANCHO Popular Fits: all 2022 Gladiator engines | RS62119 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontRed | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10332154 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PrimedPaintable | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10332152 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PrimedPaintable | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10044799 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10040651 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| RANCHO Fits: all 2022 Gladiator engines | RS62120 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith Dana 44 M220 Axle | View on Amazon |
| USA STANDARD GEAR Fits: all 2022 Gladiator engines | USA29112 | 🇺🇸 US 🇨🇦 CA | Yukon HardcoreIncludes Cover Bolts and Magnetic Drain Plugs | View on Amazon |
| USA STANDARD GEAR Fits: all 2022 Gladiator engines | USA29109 | 🇺🇸 US 🇨🇦 CA | Yukon HardcoreIncludes Cover Bolts and Magnetic Drain Plugs | View on Amazon |
This table covers the Differential covers.
9 Differential Cover parts are listed for the 2022 Jeep Gladiator, from DANA, RANCHO and USA STANDARD GEAR. DANA 10024090 carries the "Popular" badge. All of them fit every engine offered in the 2022 Gladiator.
Part numbers include DANA 10024090, RANCHO RS62119 and DANA 10332154, among others listed above.
Differential Cover Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2022 Gladiator engines | 10050881 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10062575 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
This table covers the Differential Cover bolts.
2 Differential Cover Bolt parts for the 2022 Jeep Gladiator come from DANA. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
Part numbers include DANA 10050881 and DANA 10062575.
Differential Cross Pin
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| RICHMOND Fits: all 2022 Gladiator engines | CSPD44 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Pinion Shaft | View on Amazon |
This table covers the Differential Cross pins.
One part is listed for the 2022 Jeep Gladiator — RICHMOND CSPD44.
Differential Crush Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2022 Gladiator engines | 10008361 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10008364 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
This table covers the Differential Crush sleeves.
DANA supplies both parts for the 2022 Jeep Gladiator. All of them fit every engine offered in the 2022 Gladiator.
This group includes DANA 10008361 and DANA 10008364.
Differential Gear Installation Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTIVE GEAR Fits: all 2022 Gladiator engines | D44IKJL | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Gear Install KitInstall Kit Includes Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier) | View on Amazon |
| MOTIVE GEAR Fits: all 2022 Gladiator engines | D44IKJLF | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Gear Install Kit | View on Amazon |
This table covers the Differential Gear Installation kits.
MOTIVE GEAR supplies both parts for the 2022 Jeep Gladiator. All of them fit every engine offered in the 2022 Gladiator.
Listed part numbers: MOTIVE GEAR D44IKJL and MOTIVE GEAR D44IKJLF.
Differential Lock Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AUTOTECNICA Fits: all 2022 Gladiator engines | JE0421527 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes 5 Sensors | View on Amazon |
This table covers the Differential Lock sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
One part is listed for the 2022 Jeep Gladiator — AUTOTECNICA JE0421527.
Differential Pinion Bearing / Race
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2022 Gladiator engines | 10071953 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 20145782 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 68400363AA | 🇺🇸 US 🇨🇦 CA | Fits Dana M210 Wide Front Axle, 3.73 Rear Axle Ratio, Conventional Differential Front Axle, Selec-Trac Full Time 4WD SystemCrew Cab Crew Cab | View on Amazon |
| MOTIVE GEAR Fits: all 2022 Gladiator engines | RA28RJLPK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | KitKoyo Bearings | View on Amazon |
This table covers the bearings and races on the differential pinion.
4 Differential Pinion Bearing / Race parts are listed for the 2022 Jeep Gladiator, from DANA, MOPAR and MOTIVE GEAR. All of them fit every engine offered in the 2022 Gladiator.
Part numbers include DANA 10071953, DANA 20145782 and MOPAR 68400363AA, among others listed above.
Differential Pinion Bearing Baffle
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2022 Gladiator engines | 10040475 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
This table covers the baffles that control oil at the pinion bearings.
One part is listed for the 2022 Jeep Gladiator — DANA 10040475.
Differential Pinion Flange
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2022 Gladiator engines | 10020110 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10009588 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
This table covers the flanges that connect the driveshaft to the differential pinion.
2 Differential Pinion Flange parts for the 2022 Jeep Gladiator come from DANA. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
Part numbers include DANA 10020110 and DANA 10009588.
Differential Pinion Nut
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2022 Gladiator engines | 2009625 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
This table covers the Differential Pinion nuts.
This group shows a single part: DANA 2009625.
Differential Pinion Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2022 Gladiator engines | 10039487 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| TIMKEN Fits: all 2022 Gladiator engines | SL260520 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| TIMKEN Fits: all 2022 Gladiator engines | SL260538 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Differential Pinion Seal parts for the 2022 Jeep Gladiator come from 2 brands — TIMKEN and DANA. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
Listed part numbers: DANA 10039487, TIMKEN SL260520 and TIMKEN SL260538.
Differential Pinion Shim
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2022 Gladiator engines | 68398739AA | 🇺🇸 US 🇨🇦 CA | Fits Dana M210 Wide Front Axle, 3.73 Rear Axle Ratio, Conventional Differential Front Axle, Selec-Trac Full Time 4WD SystemCrew Cab Crew Cab | View on Amazon |
This table covers the Differential Pinion shims.
This group shows a single part: MOPAR 68398739AA.
Differential Rebuild Kit
Master Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTIVE GEAR Popular Fits: all 2022 Gladiator engines | RA28RJLMK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Master Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pini | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10040469 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SpicerMaster Kit | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10040478 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SpicerMaster Kit | View on Amazon |
| USA STANDARD GEAR Fits: all 2022 Gladiator engines | ZKD44JLREAR | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Rebuild KitsIncludes Koyo Bearings | View on Amazon |
| USA STANDARD GEAR Fits: all 2022 Gladiator engines | ZKD44JLFRONT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Rebuild KitsIncludes Koyo Bearings, Differential Pinion and Carrier Bearings, Crush Sleeve, Pinion Seal, Axle Seals, Shims, Ring Gear Bolts, Pinion Nut | View on Amazon |
| USA STANDARD GEAR Fits: all 2022 Gladiator engines | USA14231 | 🇺🇸 US 🇨🇦 CA | Yukon Differential Master KitIncludes Differential Pinion and Carrier Bearings, Crush Sleeve, Pinion Seal, Shims, Ring Gear Bolts and Pinion Nut | View on Amazon |
| USA STANDARD GEAR Fits: all 2022 Gladiator engines | USA14232 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Yukon Master KitIncludes Differential Pinion and Carrier Bearings, Crush Sleeve, Pinion Seal, Axle Seals, Shims, Ring Gear Bolts and Pinion Nut | View on Amazon |
Standard Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular Fits: all 2022 Gladiator engines | 10040468 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SpicerStandard Kit | View on Amazon |
| DANA Popular Fits: all 2022 Gladiator engines | 10040477 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SpicerStandard Kit | View on Amazon |
| MOTIVE GEAR Fits: all 2022 Gladiator engines | RA28RJLF | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread LOC | View on Amazon |
| MOTIVE GEAR Fits: all 2022 Gladiator engines | RA28RJL | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal | View on Amazon |
This table covers kits that group the bearings, races and seals for a differential rebuild.
11 Differential Rebuild Kit parts are listed for the 2022 Jeep Gladiator, from DANA, USA STANDARD GEAR and MOTIVE GEAR. MOTIVE GEAR RA28RJLMK carries the "Popular" badge. All of them fit every engine offered in the 2022 Gladiator.
In the Master Kit grade, USA STANDARD GEAR, DANA and MOTIVE GEAR supply 7 parts: grouped under the catalog's "Master Kit" designation — the notes column spells out what sets them apart. A representative part number is MOTIVE GEAR RA28RJLMK.
The Standard Kit section lists 4 options from DANA and MOTIVE GEAR — grouped under the catalog's "Standard Kit" designation — the notes column spells out what sets them apart. DANA 10040468 is listed in this group.
Differential Ring and Pinion
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular Fits: all 2022 Gladiator engines | 10067204 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Popular Fits: all 2022 Gladiator engines | 10050939 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10163459 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10283179 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10051004 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10283177 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10062926 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| MOTIVE GEAR Fits: all 2022 Gladiator engines | D44JL | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rear*Rubicon Models or Non-Rubicon models with a Manual Transmission or Automatic Transmission with a Limited Slip Carrier | View on Amazon |
| MOTIVE GEAR Fits: all 2022 Gladiator engines | D44JLF | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits FrontDana Advantek M210 Differential | View on Amazon |
This table covers the ring-and-pinion gear sets that set the axle ratio.
9 Differential Ring and Pinion parts for the 2022 Jeep Gladiator come from 2 brands — DANA and MOTIVE GEAR. The "Popular" part is DANA 10067204. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
Listed part numbers: DANA 10067204, DANA 10050939 and DANA 10163459, plus the other parts above.
Differential Ring Gear Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2022 Gladiator engines | 10040474 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10008806 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| MOTIVE GEAR Fits: all 2022 Gladiator engines | F75Z4216AA | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Ring Gear Bolt | View on Amazon |
This table covers the Differential Ring Gear bolts.
3 Differential Ring Gear Bolt parts for the 2022 Jeep Gladiator come from 2 brands — DANA and MOTIVE GEAR. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
Listed part numbers: DANA 10040474, DANA 10008806 and MOTIVE GEAR F75Z4216AA.
Differential Spider Gear
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2022 Gladiator engines | 10067836 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FSGRCarrier Gear Kit | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10071921 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FSGRCarrier Gear Kit | View on Amazon |
This table covers the Differential Spider gears.
2 Differential Spider Gear parts for the 2022 Jeep Gladiator come from DANA. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
This group includes DANA 10067836 and DANA 10071921.
Drive Shaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular Fits: all 2022 Gladiator engines | 10020345 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Popular Fits: 3.6L V6 | 10097840 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FSGRIncludes Transfer Case Conversion Yoke | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10097841 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FSGRIncludes Transfer Case Conversion Yoke | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10132305 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 10132306 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| MOPAR Fits: 3.0L V6 DIESEL Turbocharged | 68330599AB | 🇺🇸 US 🇨🇦 CA | 2-Piece | View on Amazon |
| MOPAR Fits: 3.0L V6 DIESEL Turbocharged | 68330601AB | 🇺🇸 US 🇨🇦 CA | 2-Piece | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68330598AB | 🇺🇸 US 🇨🇦 CA | 2-Piece | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68330600AB | 🇺🇸 US 🇨🇦 CA | 2-Piece | View on Amazon |
This table covers the driveshafts that carry torque from the transmission or transfer case.
9 Drive Shaft parts are listed for the 2022 Jeep Gladiator, from DANA and MOPAR. DANA 10020345 carries the "Popular" badge. 4 parts fit every engine; the other 5 are engine-specific.
Part numbers include DANA 10020345, DANA 10097840 and DANA 10097841, among others listed above.
Drive Shaft Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2022 Gladiator engines | 13864 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
This table covers the Drive Shaft bolts.
This group shows a single part: DORMAN 13864.
Drive Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2022 Gladiator engines | 2019816 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
This table covers the seals at the Drive Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: DANA 2019816.
Drive Shaft Shim Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2022 Gladiator engines | 10149071 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
This table covers the Drive Shaft Shim kits.
This group shows a single part: DANA 10149071.
Gear Oil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LUCAS OIL Popular Fits: all 2022 Gladiator engines | 10121 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SYNTHETIC SAE 75W-14 0 GEAR OIL1 qt | View on Amazon |
| VALVOLINE Popular Fits: all 2022 Gladiator engines | VV982 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Full Synthetic SAE 75W-14 0 Gear Oil1 Quart | View on Amazon |
| LUCAS OIL Fits: all 2022 Gladiator engines | 10122 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Synthetic SAE 75W-14 0 Gear Oil1 Gallon | View on Amazon |
| LUCAS OIL Fits: all 2022 Gladiator engines | 10123 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Synthetic SAE 75W-14 0 Gear Oil5 Gallon | View on Amazon |
| LUCAS OIL Fits: all 2022 Gladiator engines | 18054 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Synthetic SAE 75W-14 0 Gear Oil6 Gallon | View on Amazon |
| VALVOLINE Fits: all 2022 Gladiator engines | 889787 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic SAE 75W-14 0 Gear Oil1 Quart Flex Fill | View on Amazon |
| VALVOLINE Fits: all 2022 Gladiator engines | 887344 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Full Synthetic SAE 75W-14 0 Gear Oil1 Gallon | View on Amazon |
| VALVOLINE Fits: all 2022 Gladiator engines | VV981 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Full Synthetic SAE 75W-14 0 Gear Oil5 Gallon | View on Amazon |
This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle.
8 Gear Oil parts for the 2022 Jeep Gladiator come from 2 brands — LUCAS OIL and VALVOLINE. The "Popular" part is LUCAS OIL 10121. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
This group includes LUCAS OIL 10121, VALVOLINE VV982 and LUCAS OIL 10122 and the remaining parts above.
Transfer Case Assembly
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Popular Fits: 3.6L V6 | 68240445AC | 🇺🇸 US 🇨🇦 CA | 24V VVT Engine. with Start StopMP1622C | View on Amazon |
| MOPAR Fits: 3.0L V6 DIESEL Turbocharged | 68298655AC | 🇺🇸 US 🇨🇦 CA | G3 Start Stop EngineNVG241 | View on Amazon |
| MOPAR Fits: 3.0L V6 DIESEL Turbocharged | 68298660AC | 🇺🇸 US 🇨🇦 CA | G3 Start Stop EngineNVG241 | View on Amazon |
| MOPAR Fits: 3.0L V6 DIESEL Turbocharged | 68338912AA | 🇺🇸 US 🇨🇦 CA | G3 Start Stop EngineMP3022 | View on Amazon |
| MOPAR Fits: 3.0L V6 DIESEL Turbocharged | 68338913AA | 🇺🇸 US 🇨🇦 CA | G3 Start Stop EngineMP3022 | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68240441AC | 🇺🇸 US 🇨🇦 CA | 24V VVT Engine. with Start StopMP1622C | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68240450AC | 🇺🇸 US 🇨🇦 CA | 24V VVT Engine. with Start StopMP3022 | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68240453AC | 🇺🇸 US 🇨🇦 CA | 24V VVT Engine. with Start StopMP3022 | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68321885AC | 🇺🇸 US 🇨🇦 CA | 24V VVT Engine. with Start StopMP1622C | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68321888AC | 🇺🇸 US 🇨🇦 CA | 24V VVT Engine. with Start StopMP1622C | View on Amazon |
This table covers the Transfer Case assemblies.
10 Transfer Case Assembly parts for the 2022 Jeep Gladiator come from MOPAR. The "Popular" part is MOPAR 68240445AC.
Transfer Case Control Lever
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2022 Gladiator engines | 4670723AA | 🇺🇸 US 🇨🇦 CA | Fits Command-Trac Part Time 4WD System or 4:1 Rock-Trac HD Part Time 4WD SYSCrew Cab | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 4670724AA | 🇺🇸 US 🇨🇦 CA | Fits 4:1 Rock-Trac HD Full Time 4WD SYS or Selec-Trac Full Time 4WD SystemCrew Cab | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 4670725AA | 🇺🇸 US 🇨🇦 CA | Fits Command-Trac Part Time 4WD System or 4:1 Rock-Trac HD Part Time 4WD SYSCrew Cab | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 4670726AA | 🇺🇸 US 🇨🇦 CA | Fits 4:1 Rock-Trac HD Full Time 4WD SYS or Selec-Trac Full Time 4WD SystemCrew Cab | View on Amazon |
This table covers the levers that shift the transfer case.
MOPAR supplies the 4 Transfer Case Control Lever parts for the 2022 Jeep Gladiator. All of them fit every engine offered in the 2022 Gladiator.
Listed part numbers: MOPAR 4670723AA, MOPAR 4670724AA and MOPAR 4670725AA, plus the other parts above.
Transfer Case Control Module
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2022 Gladiator engines | 68547690AA | 🇺🇸 US 🇨🇦 CA | Fits Command-Trac Part Time 4WD System or 4:1 Rock-Trac HD Part Time 4WD SYS, Anti-Spin Differential Rear AxleCrew Cab | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 68547691AA | 🇺🇸 US 🇨🇦 CA | Fits Command-Trac Part Time 4WD System or 4:1 Rock-Trac HD Part Time 4WD SYS, E-Locker Rear AxleCrew Cab | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 68547692AA | 🇺🇸 US 🇨🇦 CA | Fits 4:1 Rock-Trac HD Full Time 4WD SYS or Selec-Trac Full Time 4WD System, Anti-Spin Differential Rear AxleCrew Cab | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 68547693AA | 🇺🇸 US 🇨🇦 CA | Fits 4:1 Rock-Trac Heavy Duty Full Time 4WD System or Selec-Trac Full Time 4WD System, TRU-LOK Front & Rear AxlesCrew Cab | View on Amazon |
This table covers the Transfer Case control modules.
MOPAR supplies the 4 Transfer Case Control Module parts for the 2022 Jeep Gladiator. All of them fit every engine offered in the 2022 Gladiator.
Listed part numbers: MOPAR 68547690AA, MOPAR 68547691AA and MOPAR 68547692AA, plus the other parts above.
Transfer Case Fluid
ATF +4
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Popular Fits: all 2022 Gladiator engines | 822348 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ATF + 41 Quart | View on Amazon |
| PENTOSIN Fits: all 2022 Gladiator engines | 1058112 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ATF441 Liter | View on Amazon |
| PENTOSIN Fits: all 2022 Gladiator engines | 1058212 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ATF445 Liters | View on Amazon |
| VALVOLINE Fits: all 2022 Gladiator engines | 883587 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ATF + 41 Gallon | View on Amazon |
| VALVOLINE Fits: all 2022 Gladiator engines | 886642 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ATF + 45 Gallon | View on Amazon |
Dexron
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: all 2022 Gladiator engines | 109243 | 🇺🇸 US | Container Type: Plastic Container | View on Amazon |
Multi-Vehicle
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Popular Fits: all 2022 Gladiator engines | 126505 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi-Vehicle ATF | View on Amazon |
| LUCAS OIL Fits: all 2022 Gladiator engines | 10418 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FULL SYNTHETIC MULTI-VEHICLE AUTOMATIC TRANSMISSION FLUID1 qt | View on Amazon |
| LUCAS OIL Fits: all 2022 Gladiator engines | 18007 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic Multi-Vehicle Automatic Transmission Fluid6 Gallon | View on Amazon |
ZF Fluid
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PENTOSIN Fits: all 2022 Gladiator engines | 1058106 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ATF61 Liter | View on Amazon |
| PENTOSIN Fits: all 2022 Gladiator engines | 1058207 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ATF65 Liters | View on Amazon |
| PENTOSIN Fits: all 2022 Gladiator engines | 1058306 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ATF620 Liters or 1 Liter | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LUCAS OIL Fits: all 2022 Gladiator engines | 10823 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 12 fl. oz. | View on Amazon |
| LUCAS OIL Fits: all 2022 Gladiator engines | 108246 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Power Steering Fluid, 1 Quart | View on Amazon |
This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable.
14 Transfer Case Fluid parts for the 2022 Jeep Gladiator come from 5 brands — PENTOSIN, LUCAS OIL, VALVOLINE and 2 other brands. The "Popular" part is VALVOLINE 822348. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
The ATF +4 section lists 5 options from VALVOLINE and PENTOSIN — grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. VALVOLINE 822348 is listed in this group.
The Dexron section lists 1 option from ACDELCO — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.
The Multi-Vehicle section lists 3 options from LUCAS OIL and MOBIL — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. MOBIL 126505 is listed in this group.
The ZF Fluid section lists 3 options from PENTOSIN — grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. PENTOSIN 1058106 is listed in this group.
2 further parts sit outside the graded sections, with the same engine-level match.
Transfer Case Output Shaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2022 Gladiator engines | 68001931AA | 🇺🇸 US 🇨🇦 CA | Fits G3 Start Stop Engine4:1 Rock-Trac HD Part Time 4WD SYS | View on Amazon |
This table covers the Transfer Case Output shafts.
One part is listed for the 2022 Jeep Gladiator — MOPAR 68001931AA.
Transfer Case Output Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TIMKEN Fits: all 2022 Gladiator engines | 710835 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: TIMKEN 710835.
Transfer Case Shift Cable
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2022 Gladiator engines | 4670727AB | 🇺🇸 US 🇨🇦 CA | Fits Crew Cab5'7" Box | View on Amazon |
This table covers the Transfer Case Shift cables. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early.
One part is listed for the 2022 Jeep Gladiator — MOPAR 4670727AB.
Transfer Case Shift Mode Synchronizer Hub
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 3.6L V6 | 68330468AB | 🇺🇸 US 🇨🇦 CA | Fits 24V VVT Engine. with Start StopCrew Cab | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68330500AB | 🇺🇸 US 🇨🇦 CA | Fits 24V VVT Engine. with Start StopCrew Cab | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68334916AB | 🇺🇸 US 🇨🇦 CA | Fits 24V VVT Engine. with Start StopCrew Cab | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68334995AB | 🇺🇸 US 🇨🇦 CA | Fits 24V VVT Engine. with Start StopCrew Cab | View on Amazon |
This table covers the Transfer Case Shift Mode Synchronizer hubs.
4 Transfer Case Shift Mode Synchronizer Hub parts for the 2022 Jeep Gladiator come from MOPAR.
This group includes MOPAR 68330468AB, MOPAR 68330500AB and MOPAR 68334916AB and the remaining parts above.
Transfer Case Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2022 Gladiator engines | 68384517AA | 🇺🇸 US 🇨🇦 CA | Fits G3 Start Stop Engine4:1 Rock-Trac HD Part Time 4WD SYS | View on Amazon |
This table covers the Transfer Case sprockets.
One part is listed for the 2022 Jeep Gladiator — MOPAR 68384517AA.
Transfer Case Vent
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2022 Gladiator engines | 68316189AB | 🇺🇸 US 🇨🇦 CA | Crew Cab5'7" Box | View on Amazon |
| MOPAR Fits: all 2022 Gladiator engines | 68385085AA | 🇺🇸 US 🇨🇦 CA | Fits G3 Start Stop Engine4:1 Rock-Trac HD Part Time 4WD SYS | View on Amazon |
This table covers the vents on the transfer case.
MOPAR supplies both parts for the 2022 Jeep Gladiator. All of them fit every engine offered in the 2022 Gladiator.
This group includes MOPAR 68316189AB and MOPAR 68385085AA.
Universal Joint
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular Fits: all 2022 Gladiator engines | 15178X | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SVLGreasable | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 25178X | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer SelectGreasable | View on Amazon |
Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular Fits: all 2022 Gladiator engines | 51350X | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer Life Series (SPL)Non-Greasable | View on Amazon |
| DANA Popular Fits: all 2022 Gladiator engines | 57166X | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer Life Series (SPL)Non-Greasable | View on Amazon |
| ACDELCO Fits: all 2022 Gladiator engines | 45U0109 | 🇺🇸 US 🇨🇦 CA | Greasable Super Strength | View on Amazon |
| ACDELCO Fits: all 2022 Gladiator engines | 45U0123 | 🇺🇸 US 🇨🇦 CA | Non-Greasable Super Strength | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 51350XP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer Life Series (SPL) PlusNon-Greasable | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 513501X | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer Life Series (SPL)Greasable | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | 514103X | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer Life Series (SPL)Non-Greasable | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | SPL307166XC | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer Life Series (SPL)Blue Coated Performance | View on Amazon |
| DANA Fits: all 2022 Gladiator engines | SPL301350XC | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer Life Series (SPL)Non-Greasable | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular Fits: all 2022 Gladiator engines | 5178X | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SpicerGreasable | View on Amazon |
| AAM Fits: all 2022 Gladiator engines | 19256728 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Front Driveshaft - CV At Transfer Casewith 1355 U-Joints | View on Amazon |
| ACDELCO Fits: all 2022 Gladiator engines | 45U0103 | 🇺🇸 US 🇨🇦 CA | Gold | View on Amazon |
| GMB Fits: all 2022 Gladiator engines | 2100057 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Non-Greasable | View on Amazon |
| MOOG Fits: all 2022 Gladiator engines | 355 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Greasable | View on Amazon |
This table covers the U-joints in the driveshaft.
16 Universal Joint parts for the 2022 Jeep Gladiator come from 5 brands — DANA, ACDELCO, AAM and 2 other brands. The "Popular" part is DANA 15178X. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
The Economy section: 2 options from DANA. DANA 15178X is listed in this group.
In the Heavy Duty grade, DANA and ACDELCO supply 9 parts: rated for severe service. A representative part number is DANA 51350X.
Standard Replacement: 5 parts, from DANA, AAM, ACDELCO and 2 other brands. A representative part number is DANA 5178X.
Buying Drivetrain Parts for a 2022 Jeep Gladiator
On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.
- Match the engine first. Some drivetrain parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Universal Joint and Axle Shaft .
Frequently Asked Questions
How many drivetrain parts fit the 2022 Jeep Gladiator?
Our catalog currently lists 180 drivetrain parts for the 2022 Jeep Gladiator across 46 subcategories and 20 brands, covering both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6. Each part is matched to the engine(s) it fits.
Do drivetrain parts differ between 2022 Jeep Gladiator engines?
Some do. 159 parts fit every engine; the other 21 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of drivetrain problems on a 2022 Jeep Gladiator?
Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2022 Jeep Gladiator was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2022 Jeep Gladiator?
First match the engine — each row shows which engine(s) the part fits. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2022 Jeep Gladiator
Drivetrain Parts for Other Jeep Gladiator Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.