123 Drivetrain parts are listed for the 2023 Jeep Gladiator, in 34 part types, covering both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2023 Jeep Gladiator, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. Most of the listed parts are Transfer Case Fluid (14 parts), Axle Shaft (13 parts) and Gear Oil (9 parts). The other 31 part types cover the remaining 87 parts.
The 2023 Jeep Gladiator was sold with both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6. 103 parts fit every engine; the other 20 are engine-specific. Each part shows which engine(s) it fits.
20 brands supply drivetrain parts for the 2023 Jeep Gladiator, led by MOPAR (47 parts), DANA (15 parts) and USA STANDARD GEAR (14 parts), plus 17 more brands. Quality grades include Standard Replacement, Master Kit and Multi-Vehicle.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2023 Jeep Gladiator. 16 parts have it, including DANA 10025733 (Axle Shaft) and USA STANDARD GEAR USA11177 (Differential Carrier). Each part number opens a page with every vehicle that part fits.
4WD Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: all 2023 Gladiator engines | TCA119 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Axle Lock Switch | View on Amazon |
This table covers the actuators that engage four-wheel drive at the transfer case or axle. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
This group shows a single part: STANDARD MOTOR PRODUCTS TCA119.
Axle / Differential Assembly
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2023 Gladiator engines | SFL60JT373E69 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2023 Gladiator engines | SFL60JT410E69 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2023 Gladiator engines | SFL60JT456A69 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2023 Gladiator engines | SFL60JT456E69 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2023 Gladiator engines | SFL60JT488A69 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
This table covers the Axle / Differential assemblies.
5 Axle / Differential Assembly parts for the 2023 Jeep Gladiator come from DANA. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
This group includes DANA SFL60JT373E69, DANA SFL60JT410E69 and DANA SFL60JT456A69 and the remaining parts above.
Axle Housing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2023 Gladiator engines | 68472646AA | 🇺🇸 US 🇨🇦 CA | Fits Rear3.73 Rear Axle Ratio, Dana M70/267MM Rear Axle, Conventional Differential Rear Axle, Anti-Lock 4-Wheel Disc HD Brakes | View on Amazon |
| MOPAR Fits: all 2023 Gladiator engines | 68474076AA | 🇺🇸 US 🇨🇦 CA | Fits Rear3.73 Rear Axle Ratio, Dana M70/267MM Rear Axle, Anti-Spin Differential Rear Axle, Anti-Lock 4-Wheel Disc HD Brakes | View on Amazon |
| MOPAR Fits: all 2023 Gladiator engines | 68474170AA | 🇺🇸 US 🇨🇦 CA | Fits Rear3.73 Rear Axle Ratio, Dana M220 Wide Rear Axle, Anti-Spin Differential Rear Axle, Anti-Lock 4-Wheel Disc Brakes | View on Amazon |
| MOPAR Fits: all 2023 Gladiator engines | 68474262AA | 🇺🇸 US 🇨🇦 CA | Fits Rear4.10 Rear Axle Ratio, Dana M220 Wide Rear Axle, TRU-LOK Front & Rear Axles, Anti-Lock 4-Wheel Disc HD Brakes | View on Amazon |
| MOPAR Fits: all 2023 Gladiator engines | 68474745AA | 🇺🇸 US 🇨🇦 CA | Fits Rear3.73 Rear Axle Ratio, Dana M220 Wide Rear Axle, TRU-LOK Front & Rear Axles, Anti-Lock 4-Wheel Disc HD Brakes | View on Amazon |
This table covers the Axle housings.
MOPAR supplies the 5 Axle Housing parts for the 2023 Jeep Gladiator. All of them fit every engine offered in the 2023 Gladiator.
Listed part numbers: MOPAR 68472646AA, MOPAR 68474076AA and MOPAR 68474170AA, plus the other parts above.
Axle Shaft
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Fits: all 2023 Gladiator engines | SK68400738AA | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits RightFront | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular Fits: all 2023 Gladiator engines | 10025733 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| MOPAR Popular Fits: 3.6L V6 | 68394142AA | 🇺🇸 US 🇨🇦 CA | Fits FrontRight | View on Amazon |
| USA STANDARD GEAR Popular Fits: all 2023 Gladiator engines | USA21901 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 4340 Chromoly32 Spline | View on Amazon |
| USA STANDARD GEAR Popular Fits: all 2023 Gladiator engines | USA21902 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 4340 Chromoly32 Spline | View on Amazon |
| MOPAR Fits: all 2023 Gladiator engines | 68400739AA | 🇺🇸 US 🇨🇦 CA | Fits Front LeftDana M210 Wide Front Axle, 4.10 Rear Axle Ratio, E-Locker Front Axle, 4:1 Rock-Trac HD Part Time 4WD System | View on Amazon |
| MOPAR Fits: all 2023 Gladiator engines | 68397157AA | 🇺🇸 US 🇨🇦 CA | Fits FrontRight | View on Amazon |
| MOPAR Fits: all 2023 Gladiator engines | 68400738AA | 🇺🇸 US 🇨🇦 CA | Fits RightFront | View on Amazon |
| MOPAR Fits: all 2023 Gladiator engines | 68397156AA | 🇺🇸 US 🇨🇦 CA | Fits FrontLeft | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68403881AA | 🇺🇸 US 🇨🇦 CA | Fits FrontLeft | View on Amazon |
| USA STANDARD GEAR Fits: all 2023 Gladiator engines | USA11880 | 🇺🇸 US | 4340 Chromoly32 Spline | View on Amazon |
| USA STANDARD GEAR Fits: all 2023 Gladiator engines | USA11881 | 🇺🇸 US | 4340 Chromoly32 Spline | View on Amazon |
| USA STANDARD GEAR Fits: all 2023 Gladiator engines | ZAW24172 | 🇺🇸 US | Chrome-Moly Axle Kit | View on Amazon |
This table covers the Axle shafts.
13 Axle Shaft parts for the 2023 Jeep Gladiator come from 4 brands — MOPAR, USA STANDARD GEAR, SKP and 1 other brand. The "Popular" part is DANA 10025733. 11 parts fit every engine; the other 2 are engine-specific.
The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK68400738AA is listed in this group.
In the Standard Replacement grade, MOPAR, USA STANDARD GEAR and DANA supply 12 parts: built to original-equipment specification. A representative part number is DANA 10025733.
Axle Shaft Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2023 Gladiator engines | 10087279 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| USA STANDARD GEAR Fits: all 2023 Gladiator engines | USA10997 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Axle Shaft Bearing Kit | View on Amazon |
This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
2 Axle Shaft Bearing parts for the 2023 Jeep Gladiator come from 2 brands — DANA and USA STANDARD GEAR. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
This group includes DANA 10087279 and USA STANDARD GEAR USA10997.
Axle Shaft Bearing Collar
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2023 Gladiator engines | 68400383AA | 🇺🇸 US 🇨🇦 CA | Fits G3 Start Stop Engine5,500 LB Front Axle with Hub EXT, 3.73 Rear Axle Ratio, Conventional Differential Front Axle, Command-Trac Part Time 4WD System | View on Amazon |
| MOPAR Fits: all 2023 Gladiator engines | 68400382AA | 🇺🇸 US 🇨🇦 CA | Fits G3 Start Stop Engine5,500 LB Front Axle with Hub EXT, 3.73 Rear Axle Ratio, Conventional Differential Front Axle, Command-Trac Part Time 4WD System | View on Amazon |
This table covers the Axle Shaft Bearing collars.
MOPAR supplies both parts for the 2023 Jeep Gladiator. All of them fit every engine offered in the 2023 Gladiator.
This group includes MOPAR 68400383AA and MOPAR 68400382AA.
Axle Shaft Seal Retainer Nut
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2023 Gladiator engines | 630032 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Axle Seal Retainer To Brake Backing Plate | View on Amazon |
This table covers the Axle Shaft Seal Retainer nuts.
This group shows a single part: DORMAN 630032.
CV Axle
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TRAKMOTIVE Fits: all 2023 Gladiator engines | CH86061 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Rightwith Locking Differential | View on Amazon |
| TRAKMOTIVE Fits: all 2023 Gladiator engines | CH86062 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Leftwith Locking Differential | View on Amazon |
This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.
TRAKMOTIVE supplies both parts for the 2023 Jeep Gladiator. All of them fit every engine offered in the 2023 Gladiator.
Listed part numbers: TRAKMOTIVE CH86061 and TRAKMOTIVE CH86062.
Differential Carrier
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Popular Fits: all 2023 Gladiator engines | USA11177 | 🇺🇸 US 🇨🇦 CA | Limited Slip DifferentialCarrier Case | View on Amazon |
| DANA Fits: all 2023 Gladiator engines | 10067838 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| MOPAR Fits: all 2023 Gladiator engines | 68472641AA | 🇺🇸 US 🇨🇦 CA | Fits Differential Assembly, Rear3.73 Rear Axle Ratio, Dana M220 Wide Rear Axle, Conventional Differential Rear Axle, Anti-Lock 4-Wheel Disc HD Brakes | View on Amazon |
| MOPAR Fits: all 2023 Gladiator engines | 68476426AA | 🇺🇸 US 🇨🇦 CA | Fits Differential Assembly, FrontDana M210 Wide Front Axle, 3.73 Rear Axle Ratio, Conventional Differential Front Axle, Selec-Trac Full Time 4WD System | View on Amazon |
| USA STANDARD GEAR Fits: all 2023 Gladiator engines | USA11253 | 🇺🇸 US 🇨🇦 CA | Differential Carrier Case | View on Amazon |
This table covers the carriers that hold the differential gears in the axle.
5 Differential Carrier parts are listed for the 2023 Jeep Gladiator, from USA STANDARD GEAR, MOPAR and DANA. USA STANDARD GEAR USA11177 carries the "Popular" badge. All of them fit every engine offered in the 2023 Gladiator.
Listed part numbers: USA STANDARD GEAR USA11177, DANA 10067838 and MOPAR 68472641AA, plus the other parts above.
Differential Carrier Bearing / Race
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2023 Gladiator engines | 10071915 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
This table covers the bearings and races that support the differential carrier.
One part is listed for the 2023 Jeep Gladiator — DANA 10071915.
Differential Control Module
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2023 Gladiator engines | 10179889 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
This table covers the Differential control modules.
This group shows a single part: DANA 10179889.
Differential Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| RANCHO Popular Fits: all 2023 Gladiator engines | RS62119 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontRed | View on Amazon |
| DANA Fits: all 2023 Gladiator engines | 10071956 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| RANCHO Fits: all 2023 Gladiator engines | RS62120 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith Dana 44 M220 Axle | View on Amazon |
| USA STANDARD GEAR Fits: all 2023 Gladiator engines | USA29112 | 🇺🇸 US 🇨🇦 CA | Yukon HardcoreIncludes Cover Bolts and Magnetic Drain Plugs | View on Amazon |
| USA STANDARD GEAR Fits: all 2023 Gladiator engines | USA29109 | 🇺🇸 US 🇨🇦 CA | Yukon HardcoreIncludes Cover Bolts and Magnetic Drain Plugs | View on Amazon |
This table covers the Differential covers.
5 Differential Cover parts for the 2023 Jeep Gladiator come from 3 brands — RANCHO, USA STANDARD GEAR and DANA. The "Popular" part is RANCHO RS62119. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
Part numbers include RANCHO RS62119, DANA 10071956 and RANCHO RS62120, among others listed above.
Differential Cross Pin
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| RICHMOND Fits: all 2023 Gladiator engines | CSPD44 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Pinion Shaft | View on Amazon |
This table covers the Differential Cross pins.
This group shows a single part: RICHMOND CSPD44.
Differential Gear Installation Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTIVE GEAR Fits: all 2023 Gladiator engines | D44IKJL | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Gear Install KitInstall Kit Includes Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier) | View on Amazon |
| MOTIVE GEAR Fits: all 2023 Gladiator engines | D44IKJLF | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Gear Install Kit | View on Amazon |
This table covers the Differential Gear Installation kits.
2 Differential Gear Installation Kit parts for the 2023 Jeep Gladiator come from MOTIVE GEAR. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
Part numbers include MOTIVE GEAR D44IKJL and MOTIVE GEAR D44IKJLF.
Differential Lock Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AUTOTECNICA Fits: all 2023 Gladiator engines | JE0421527 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes 5 Sensors | View on Amazon |
This table covers the Differential Lock sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
This group shows a single part: AUTOTECNICA JE0421527.
Differential Pinion Bearing / Race
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2023 Gladiator engines | 20145782 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| MOTIVE GEAR Fits: all 2023 Gladiator engines | RA28RJLPK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | KitKoyo Bearings | View on Amazon |
This table covers the bearings and races on the differential pinion.
2 Differential Pinion Bearing / Race parts for the 2023 Jeep Gladiator come from 2 brands — DANA and MOTIVE GEAR. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
This group includes DANA 20145782 and MOTIVE GEAR RA28RJLPK.
Differential Pinion Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TIMKEN Fits: all 2023 Gladiator engines | SL260520 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| TIMKEN Fits: all 2023 Gladiator engines | SL260538 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
TIMKEN supplies both parts for the 2023 Jeep Gladiator. All of them fit every engine offered in the 2023 Gladiator.
Listed part numbers: TIMKEN SL260520 and TIMKEN SL260538.
Differential Rebuild Kit
Master Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTIVE GEAR Popular Fits: all 2023 Gladiator engines | RA28RJLMK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Master Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pini | View on Amazon |
| USA STANDARD GEAR Popular Fits: all 2023 Gladiator engines | USA14231 | 🇺🇸 US 🇨🇦 CA | Yukon Differential Master KitIncludes Differential Pinion and Carrier Bearings, Crush Sleeve, Pinion Seal, Shims, Ring Gear Bolts and Pinion Nut | View on Amazon |
| USA STANDARD GEAR Fits: all 2023 Gladiator engines | ZKD44JLREAR | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Rebuild KitsIncludes Koyo Bearings | View on Amazon |
| USA STANDARD GEAR Fits: all 2023 Gladiator engines | ZKD44JLFRONT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Rebuild KitsIncludes Koyo Bearings, Differential Pinion and Carrier Bearings, Crush Sleeve, Pinion Seal, Axle Seals, Shims, Ring Gear Bolts, Pinion Nut | View on Amazon |
| USA STANDARD GEAR Fits: all 2023 Gladiator engines | USA14232 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Yukon Master KitIncludes Differential Pinion and Carrier Bearings, Crush Sleeve, Pinion Seal, Axle Seals, Shims, Ring Gear Bolts and Pinion Nut | View on Amazon |
Standard Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTIVE GEAR Fits: all 2023 Gladiator engines | RA28RJLF | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread LOC | View on Amazon |
| MOTIVE GEAR Fits: all 2023 Gladiator engines | RA28RJL | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal | View on Amazon |
This table covers kits that group the bearings, races and seals for a differential rebuild.
7 Differential Rebuild Kit parts for the 2023 Jeep Gladiator come from 2 brands — USA STANDARD GEAR and MOTIVE GEAR. The "Popular" part is MOTIVE GEAR RA28RJLMK. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
The Master Kit section lists 5 options from USA STANDARD GEAR and MOTIVE GEAR — grouped under the catalog's "Master Kit" designation — the notes column spells out what sets them apart. MOTIVE GEAR RA28RJLMK is listed in this group.
In the Standard Kit grade, MOTIVE GEAR supplies 2 parts: grouped under the catalog's "Standard Kit" designation — the notes column spells out what sets them apart. A representative part number is MOTIVE GEAR RA28RJLF.
This group includes MOTIVE GEAR RA28RJLMK, USA STANDARD GEAR USA14231 and USA STANDARD GEAR ZKD44JLREAR and the remaining parts above.
Differential Ring and Pinion
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular Fits: all 2023 Gladiator engines | 10163459 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Popular Fits: all 2023 Gladiator engines | 10283179 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| MOPAR Fits: all 2023 Gladiator engines | 68476427AA | 🇺🇸 US 🇨🇦 CA | Fits Dana M210 Wide Front Axle, 3.73 Rear Axle Ratio, Conventional Differential Front Axle, Selec-Trac Full Time 4WD SystemCrew Cab Crew Cab | View on Amazon |
| MOPAR Fits: all 2023 Gladiator engines | 68565404AA | 🇺🇸 US 🇨🇦 CA | Fits Dana M210 Wide Front Axle, 4.10 Rear Axle Ratio, TRU-LOK Front & Rear Axles, 4:1 Rock-Trac HD Full Time 4WD SYSCrew Cab Crew Cab | View on Amazon |
| MOTIVE GEAR Fits: all 2023 Gladiator engines | D44JL | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits RearDana Advantek M220 Differential | View on Amazon |
| MOTIVE GEAR Fits: all 2023 Gladiator engines | D44JLF | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontDana Advantek M210 Differential | View on Amazon |
This table covers the ring-and-pinion gear sets that set the axle ratio.
6 Differential Ring and Pinion parts are listed for the 2023 Jeep Gladiator, from DANA, MOPAR and MOTIVE GEAR. DANA 10163459 carries the "Popular" badge. All of them fit every engine offered in the 2023 Gladiator.
Listed part numbers: DANA 10163459, DANA 10283179 and MOPAR 68476427AA, plus the other parts above.
Differential Spider Gear
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2023 Gladiator engines | 10067836 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FSGRCarrier Gear Kit | View on Amazon |
This table covers the Differential Spider gears.
One part is listed for the 2023 Jeep Gladiator — DANA 10067836.
Drive Shaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 3.0L V6 DIESEL Turbocharged | 68330599AB | 🇺🇸 US 🇨🇦 CA | 2-Piece | View on Amazon |
| MOPAR Fits: 3.0L V6 DIESEL Turbocharged | 68330601AB | 🇺🇸 US 🇨🇦 CA | 2-Piece | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68330598AB | 🇺🇸 US 🇨🇦 CA | 2-Piece | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68330600AB | 🇺🇸 US 🇨🇦 CA | 2-Piece | View on Amazon |
This table covers the driveshafts that carry torque from the transmission or transfer case.
4 Drive Shaft parts for the 2023 Jeep Gladiator come from MOPAR.
This group includes MOPAR 68330599AB, MOPAR 68330601AB and MOPAR 68330598AB and the remaining parts above.
Drive Shaft Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2023 Gladiator engines | 13864 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
This table covers the Drive Shaft bolts.
One part is listed for the 2023 Jeep Gladiator — DORMAN 13864.
Gear Oil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LUCAS OIL Popular Fits: all 2023 Gladiator engines | 10121 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SYNTHETIC SAE 75W-14 0 GEAR OIL1 qt | View on Amazon |
| VALVOLINE Popular Fits: all 2023 Gladiator engines | VV982 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Full Synthetic SAE 75W-14 0 Gear Oil1 Quart | View on Amazon |
| LUCAS OIL Fits: all 2023 Gladiator engines | 10122 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Synthetic SAE 75W-14 0 Gear Oil1 Gallon | View on Amazon |
| LUCAS OIL Fits: all 2023 Gladiator engines | 10123 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Synthetic SAE 75W-14 0 Gear Oil5 Gallon | View on Amazon |
| LUCAS OIL Fits: all 2023 Gladiator engines | 18054 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Synthetic SAE 75W-14 0 Gear Oil6 Gallon | View on Amazon |
| MOBIL Fits: 3.0L V6 DIESEL Turbocharged | 102490 | 🇺🇸 US 🇨🇦 CA | Synthetic Gear Lube Limited Slip 75W-14 0Mobil 1 Synthetic Gear Lubricant LS 75W-14 0 | View on Amazon |
| VALVOLINE Fits: all 2023 Gladiator engines | 889787 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic SAE 75W-14 0 Gear Oil1 Quart Flex Fill | View on Amazon |
| VALVOLINE Fits: all 2023 Gladiator engines | 887344 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Full Synthetic SAE 75W-14 0 Gear Oil1 Gallon | View on Amazon |
| VALVOLINE Fits: all 2023 Gladiator engines | VV981 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Full Synthetic SAE 75W-14 0 Gear Oil5 Gallon | View on Amazon |
This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle.
9 Gear Oil parts are listed for the 2023 Jeep Gladiator, from LUCAS OIL, VALVOLINE and MOBIL. LUCAS OIL 10121 carries the "Popular" badge. 8 parts fit every engine; the other 1 is engine-specific.
Part numbers include LUCAS OIL 10121, VALVOLINE VV982 and LUCAS OIL 10122, among others listed above.
Transfer Case Assembly
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Popular Fits: 3.6L V6 | 68240445AC | 🇺🇸 US 🇨🇦 CA | 24V VVT Engine. with Start StopMP1622C | View on Amazon |
| MOPAR Fits: 3.0L V6 DIESEL Turbocharged | 68298655AC | 🇺🇸 US 🇨🇦 CA | G3 Start Stop EngineNVG241 | View on Amazon |
| MOPAR Fits: 3.0L V6 DIESEL Turbocharged | 68298660AC | 🇺🇸 US 🇨🇦 CA | G3 Start Stop EngineNVG241 | View on Amazon |
| MOPAR Fits: 3.0L V6 DIESEL Turbocharged | 68338912AA | 🇺🇸 US 🇨🇦 CA | G3 Start Stop EngineMP3022 | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68240441AC | 🇺🇸 US 🇨🇦 CA | 24V VVT Engine. with Start StopMP1622C | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68240450AC | 🇺🇸 US 🇨🇦 CA | 24V VVT Engine. with Start StopMP3022 | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68240453AC | 🇺🇸 US 🇨🇦 CA | 24V VVT Engine. with Start StopMP3022 | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68321885AC | 🇺🇸 US 🇨🇦 CA | 24V VVT Engine. with Start StopMP1622C | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68321888AC | 🇺🇸 US 🇨🇦 CA | 24V VVT Engine. with Start StopMP1622C | View on Amazon |
This table covers the Transfer Case assemblies.
MOPAR supplies the 9 Transfer Case Assembly parts for the 2023 Jeep Gladiator. MOPAR 68240445AC carries the "Popular" badge.
Listed part numbers: MOPAR 68240445AC, MOPAR 68298655AC and MOPAR 68298660AC, plus the other parts above.
Transfer Case Control Lever
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2023 Gladiator engines | 4670723AA | 🇺🇸 US 🇨🇦 CA | Fits Command-Trac Part Time 4WD System or 4:1 Rock-Trac HD Part Time 4WD SYSCrew Cab | View on Amazon |
| MOPAR Fits: all 2023 Gladiator engines | 4670724AA | 🇺🇸 US 🇨🇦 CA | Fits 4:1 Rock-Trac HD Full Time 4WD SYS or Selec-Trac Full Time 4WD SystemCrew Cab | View on Amazon |
| MOPAR Fits: all 2023 Gladiator engines | 4670725AA | 🇺🇸 US 🇨🇦 CA | Fits Command-Trac Part Time 4WD System or 4:1 Rock-Trac HD Part Time 4WD SYSCrew Cab | View on Amazon |
| MOPAR Fits: all 2023 Gladiator engines | 4670726AA | 🇺🇸 US 🇨🇦 CA | Fits 4:1 Rock-Trac HD Full Time 4WD SYS or Selec-Trac Full Time 4WD SystemCrew Cab | View on Amazon |
This table covers the levers that shift the transfer case.
4 Transfer Case Control Lever parts for the 2023 Jeep Gladiator come from MOPAR. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
Listed part numbers: MOPAR 4670723AA, MOPAR 4670724AA and MOPAR 4670725AA, plus the other parts above.
Transfer Case Control Module
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2023 Gladiator engines | 68611939AA | 🇺🇸 US 🇨🇦 CA | Fits Command-Trac Part Time 4WD System or 4:1 Rock-Trac HD Part Time 4WD SYS, Anti-Spin Differential Rear AxleCrew Cab | View on Amazon |
| MOPAR Fits: all 2023 Gladiator engines | 68611940AA | 🇺🇸 US 🇨🇦 CA | Fits Command-Trac Part Time 4WD System or 4:1 Rock-Trac HD Part Time 4WD SYS, E-Locker Rear AxleCrew Cab | View on Amazon |
| MOPAR Fits: all 2023 Gladiator engines | 68611941AA | 🇺🇸 US 🇨🇦 CA | Fits 4:1 Rock-Trac HD Full Time 4WD SYS or Selec-Trac Full Time 4WD System, Anti-Spin Differential Rear AxleCrew Cab | View on Amazon |
| MOPAR Fits: all 2023 Gladiator engines | 68611942AA | 🇺🇸 US 🇨🇦 CA | Fits 4:1 Rock-Trac HD Full Time 4WD SYS or Selec-Trac Full Time 4WD System, E-Locker Rear AxleCrew Cab | View on Amazon |
This table covers the Transfer Case control modules.
4 Transfer Case Control Module parts for the 2023 Jeep Gladiator come from MOPAR. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
This group includes MOPAR 68611939AA, MOPAR 68611940AA and MOPAR 68611941AA and the remaining parts above.
Transfer Case Fluid
ATF +4
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Popular Fits: all 2023 Gladiator engines | 822348 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ATF + 41 Quart | View on Amazon |
| PENTOSIN Fits: all 2023 Gladiator engines | 1058112 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ATF441 Liter | View on Amazon |
| PENTOSIN Fits: all 2023 Gladiator engines | 1058212 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ATF445 Liters | View on Amazon |
| VALVOLINE Fits: all 2023 Gladiator engines | 883587 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ATF + 41 Gallon | View on Amazon |
| VALVOLINE Fits: all 2023 Gladiator engines | 886642 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ATF + 45 Gallon | View on Amazon |
Dexron
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: all 2023 Gladiator engines | 109243 | 🇺🇸 US | Container Type: Plastic Container | View on Amazon |
Multi-Vehicle
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Popular Fits: all 2023 Gladiator engines | 126505 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi-Vehicle ATF | View on Amazon |
| LUCAS OIL Fits: all 2023 Gladiator engines | 10418 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FULL SYNTHETIC MULTI-VEHICLE AUTOMATIC TRANSMISSION FLUID1 qt | View on Amazon |
| LUCAS OIL Fits: all 2023 Gladiator engines | 18007 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic Multi-Vehicle Automatic Transmission Fluid6 Gallon | View on Amazon |
ZF Fluid
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PENTOSIN Fits: all 2023 Gladiator engines | 1058106 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ATF61 Liter | View on Amazon |
| PENTOSIN Fits: all 2023 Gladiator engines | 1058207 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ATF65 Liters | View on Amazon |
| PENTOSIN Fits: all 2023 Gladiator engines | 1058306 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ATF620 Liters or 1 Liter | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LUCAS OIL Fits: all 2023 Gladiator engines | 10823 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 12 fl. oz. | View on Amazon |
| LUCAS OIL Fits: all 2023 Gladiator engines | 108246 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Power Steering Fluid, 1 Quart | View on Amazon |
This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable.
14 Transfer Case Fluid parts are listed for the 2023 Jeep Gladiator, from PENTOSIN, LUCAS OIL, VALVOLINE and 2 other brands. VALVOLINE 822348 carries the "Popular" badge. All of them fit every engine offered in the 2023 Gladiator.
In the ATF +4 grade, VALVOLINE and PENTOSIN supply 5 parts: grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE 822348.
In the Dexron grade, ACDELCO supplies 1 part: grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109243.
In the Multi-Vehicle grade, LUCAS OIL and MOBIL supply 3 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 126505.
In the ZF Fluid grade, PENTOSIN supplies 3 parts: grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. A representative part number is PENTOSIN 1058106.
2 ungrouped parts are not assigned to a grade, with the same engine-level match.
Transfer Case Output Shaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2023 Gladiator engines | 68001931AA | 🇺🇸 US 🇨🇦 CA | Fits G3 Start Stop Engine4:1 Rock-Trac HD Part Time 4WD SYS | View on Amazon |
This table covers the Transfer Case Output shafts.
This group shows a single part: MOPAR 68001931AA.
Transfer Case Output Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TIMKEN Fits: all 2023 Gladiator engines | 710835 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2023 Jeep Gladiator — TIMKEN 710835.
Transfer Case Shift Cable
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2023 Gladiator engines | 4670727AB | 🇺🇸 US 🇨🇦 CA | Fits Crew Cab5'7" Box | View on Amazon |
This table covers the Transfer Case Shift cables. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early.
This group shows a single part: MOPAR 4670727AB.
Transfer Case Shift Mode Synchronizer Hub
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 3.6L V6 | 68330468AB | 🇺🇸 US 🇨🇦 CA | Fits 24V VVT Engine. with Start StopCrew Cab | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68330500AB | 🇺🇸 US 🇨🇦 CA | Fits 24V VVT Engine. with Start StopCrew Cab | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68334916AB | 🇺🇸 US 🇨🇦 CA | Fits 24V VVT Engine. with Start StopCrew Cab | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68334995AB | 🇺🇸 US 🇨🇦 CA | Fits 24V VVT Engine. with Start StopCrew Cab | View on Amazon |
This table covers the Transfer Case Shift Mode Synchronizer hubs.
MOPAR supplies the 4 Transfer Case Shift Mode Synchronizer Hub parts for the 2023 Jeep Gladiator.
Listed part numbers: MOPAR 68330468AB, MOPAR 68330500AB and MOPAR 68334916AB, plus the other parts above.
Transfer Case Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2023 Gladiator engines | 68384517AA | 🇺🇸 US 🇨🇦 CA | Fits G3 Start Stop Engine4:1 Rock-Trac HD Part Time 4WD SYS | View on Amazon |
This table covers the Transfer Case sprockets.
This group shows a single part: MOPAR 68384517AA.
Transfer Case Vent
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2023 Gladiator engines | 68316189AB | 🇺🇸 US 🇨🇦 CA | Crew Cab5'7" Box | View on Amazon |
| MOPAR Fits: all 2023 Gladiator engines | 68385085AA | 🇺🇸 US 🇨🇦 CA | Fits G3 Start Stop Engine4:1 Rock-Trac HD Part Time 4WD SYS | View on Amazon |
This table covers the vents on the transfer case.
2 Transfer Case Vent parts for the 2023 Jeep Gladiator come from MOPAR. Every part fits both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6.
Part numbers include MOPAR 68316189AB and MOPAR 68385085AA.
Universal Joint
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP Fits: all 2023 Gladiator engines | 2100057 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Non-Greasable | View on Amazon |
| GMB Fits: all 2023 Gladiator engines | 2100057 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Non-Greasable | View on Amazon |
| MOOG Fits: all 2023 Gladiator engines | 355 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Greasable | View on Amazon |
This table covers the U-joints in the driveshaft.
3 Universal Joint parts are listed for the 2023 Jeep Gladiator, from FVP, GMB and MOOG. All of them fit every engine offered in the 2023 Gladiator.
This group includes FVP 2100057 and MOOG 355 and the remaining parts above.
Buying Drivetrain Parts for a 2023 Jeep Gladiator
On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.
- Match the engine first. Some drivetrain parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Transfer Case Fluid and Axle Shaft .
Frequently Asked Questions
How many drivetrain parts fit the 2023 Jeep Gladiator?
Our catalog currently lists 123 drivetrain parts for the 2023 Jeep Gladiator across 34 subcategories and 20 brands, covering both the 3.0L V6 DIESEL Turbocharged and the 3.6L V6. Each part is matched to the engine(s) it fits.
Do drivetrain parts differ between 2023 Jeep Gladiator engines?
Some do. 103 parts fit every engine; the other 20 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of drivetrain problems on a 2023 Jeep Gladiator?
Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2023 Jeep Gladiator was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2023 Jeep Gladiator?
First match the engine — each row shows which engine(s) the part fits. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2023 Jeep Gladiator
Drivetrain Parts for Other Jeep Gladiator Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.