2024 Jeep Gladiator Engine Parts

This table covers the camshafts that open the valves. Read more

8 Camshaft parts for the 2024 Jeep Gladiator come from 2 brands — MELLING and MOPAR. The "Popular" part is MELLING CKMC1443.

This group includes MELLING CKMC1443, MOPAR 68661147AB and MELLING MC1444 and the remaining parts above.

This table covers the Connecting Rod bolts. Read more

One part is listed for the 2024 Jeep Gladiator — MOPAR 6509128AA.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts for the 2024 Jeep Gladiator come from 4 brands — AJUSA, MAHLE / CLEVITE, MOPAR and 1 other brand.

This group includes AJUSA 54308900, MAHLE / CLEVITE CS55401 and MOPAR 68297851AB and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

MOPAR supplies the 5 Crankshaft Main Bearing parts for the 2024 Jeep Gladiator. MOPAR 68242633AA carries the "Popular" badge.

Part numbers include MOPAR 68242633AA, MOPAR 68242631AA and MOPAR 68242636AA, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Crankshaft Seal parts are listed for the 2024 Jeep Gladiator, from AJUSA, MAHLE / CLEVITE and MOPAR.

Part numbers include AJUSA 15084500, AJUSA 71014100 and MAHLE / CLEVITE JV1759, among others listed above.

This table covers the cylinder heads that close the top of the block. Read more

MOPAR supplies the 4 Cylinder Head parts for the 2024 Jeep Gladiator.

Listed part numbers: MOPAR 68293289AB, MOPAR 68293288AB and MOPAR R8293288AB, plus the other parts above.

This table covers the Cylinder Head Alignment Dowel pins. Read more

This group shows a single part: MOPAR 6100997.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts for the 2024 Jeep Gladiator come from 2 brands — AJUSA and MAHLE / CLEVITE.

Listed part numbers: AJUSA 81062400 and MAHLE / CLEVITE GS33681.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Cylinder Head Gasket parts for the 2024 Jeep Gladiator come from 3 brands — MOPAR, AJUSA and MAHLE / CLEVITE. The "Popular" part is MOPAR 68284905AA.

Listed part numbers: MOPAR 68284905AA, MOPAR 68284904AA and AJUSA 10252500, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Cylinder Head Gasket Set parts for the 2024 Jeep Gladiator come from 4 brands — AJUSA, MAHLE / CLEVITE, MOPAR and 1 other brand.

Part numbers include AJUSA 52574600, MAHLE / CLEVITE HS55401 and MOPAR 68297850AE, among others listed above.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2024 Jeep Gladiator — MOPAR 4556020AB.

This table covers the gaskets that seal the Cylinder Head Side Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Cylinder Head Side Cover Gasket parts for the 2024 Jeep Gladiator come from MOPAR.

Part numbers include MOPAR 4893805AB, MOPAR 4893804AC and MOPAR 4893805AC.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 2024 Jeep Gladiator — MOPAR 4609325.

This table covers the Engine covers. Read more

3 Engine Cover parts for the 2024 Jeep Gladiator come from MOPAR.

Part numbers include MOPAR 68293980AA, MOPAR 6MA00RXFAA and MOPAR 6BU43RXFAC.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts for the 2024 Jeep Gladiator come from 2 brands — MOPAR and AJUSA.

Listed part numbers: AJUSA 50525900, MOPAR 68297850AC and MOPAR 68297850AD, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts are listed for the 2024 Jeep Gladiator, from MELLING, MOPAR and SBI.

Part numbers include MELLING V3462, MOPAR 5048022AA and SBI 13462.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

4 Expansion Plug parts for the 2024 Jeep Gladiator come from MOPAR.

Listed part numbers: MOPAR 68060349AA, MOPAR 6512292AA and MOPAR 6510082AA, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts for the 2024 Jeep Gladiator come from 6 brands — SKP, ATP, DAYCO and 3 other brands. The "Popular" part is ATP 102343.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594405 is listed in this group.

In the Standard Replacement grade, ATP, DAYCO, DORMAN and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is ATP 102343.

This group includes ATP 102343, SKP SK594405 and DAYCO PB1707N and the remaining parts above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

MOPAR supplies the 3 Intake Manifold parts for the 2024 Jeep Gladiator.

Part numbers include MOPAR 5281803AA, MOPAR 68241844AF and MOPAR 68241844AG.

This table covers the Intake Manifold bolts. Read more

This group shows a single part: DORMAN 32128.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts for the 2024 Jeep Gladiator come from 6 brands — AJUSA, FEL-PRO, ULTRA-POWER and 3 other brands. The "Popular" part is FEL-PRO MS97204.

Part numbers include FEL-PRO MS97204 and AJUSA 13317900, among others listed above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Plenum Gasket parts are listed for the 2024 Jeep Gladiator, from FEL-PRO, MAHLE / CLEVITE and ULTRA-POWER.

This group includes FEL-PRO MS97205 and MAHLE / CLEVITE MS20456 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Intake Valve parts are listed for the 2024 Jeep Gladiator, from MELLING, MOPAR, QUALCAST and 1 other brand.

Listed part numbers: MELLING V3461, MOPAR 5047917AA and QUALCAST 1013461, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

3 Motor Mount parts are listed for the 2024 Jeep Gladiator, from ANCHOR and DEA / MARMON RIDE CONTROL.

Listed part numbers: ANCHOR 3578, ANCHOR 3579 and DEA / MARMON RIDE CONTROL A20121.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

MOPAR supplies both parts for the 2024 Jeep Gladiator.

Listed part numbers: MOPAR 68328258AE and MOPAR 68328259AE.

This table covers the isolators in an engine mount. Read more

4 Motor Mount Isolator parts for the 2024 Jeep Gladiator come from MOPAR.

This group includes MOPAR 68620584AB, MOPAR 68620585AB and MOPAR 68620586AB and the remaining parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

28 Oil parts are listed for the 2024 Jeep Gladiator, from VALVOLINE, MOBIL, LIQUI MOLY and 3 other brands. LIQUI MOLY 2208 carries the "Popular" badge. They are grouped as Full Synthetic and High Mileage (>75,000 Miles), with Full Synthetic the largest group at 21 parts from VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts are listed for the 2024 Jeep Gladiator, from HOLSTEIN and STANDARD MOTOR PRODUCTS.

Part numbers include HOLSTEIN 2OFH0003 and STANDARD MOTOR PRODUCTS OFH111.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Cooler Gasket parts for the 2024 Jeep Gladiator come from 2 brands — AJUSA and MAHLE / CLEVITE.

This group includes AJUSA 77016800 and MAHLE / CLEVITE GS33753.

This table covers the Oil Cooler Hose pipes. Read more

One part is listed for the 2024 Jeep Gladiator — MOPAR 68285547AB.

This table covers the Oil Dipstick tubes. Read more

MOPAR supplies both parts for the 2024 Jeep Gladiator.

Listed part numbers: MOPAR 68325245AA and MOPAR 68291413AA.

This table covers the drain plugs in the oil pan. Read more

3 Oil Drain Plug parts are listed for the 2024 Jeep Gladiator, from DORMAN, MOPAR and SKP.

Listed part numbers: DORMAN 090172, MOPAR 6513414AA and SKP SK090053CD.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts are listed for the 2024 Jeep Gladiator, from GATES and MOTORAD.

Part numbers include GATES 31299 and MOTORAD MO205.

This table covers the Oil Filler tubes. Read more

One part is listed for the 2024 Jeep Gladiator — MOPAR 68259971AB.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

16 Oil Filter parts are listed for the 2024 Jeep Gladiator, from WIX, PRO-TEC, BOSCH and 12 other brands. PRO-TEC PXL10010 carries the "Popular" badge.

Economy: 8 parts, from PRO-TEC, BOSCH, CHAMP / LUBER-FINER and 5 other brands. A representative part number is PRO-TEC PXL10010.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX WL10010XP.

The Standard Replacement section: 6 options from MOPAR, WIX, FEL-PRO and 3 other brands. MOPAR 68191349AA is listed in this group.

This table covers the Oil Filter adapters. Read more

This group shows a single part: MOPAR 68596318AB.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: MOPAR 68191356AB.

This table covers the Oil Filter covers. Read more

3 Oil Filter Cover parts for the 2024 Jeep Gladiator come from 3 brands — MOPAR, MOTORAD and STANDARD MOTOR PRODUCTS.

This group includes MOPAR 68191350AA, MOTORAD MO327 and STANDARD MOTOR PRODUCTS OFC101.

This table covers the Oil Filter housings. Read more

5 Oil Filter Housing parts for the 2024 Jeep Gladiator come from 5 brands — DORMAN, AUTOTECNICA, FEL-PRO and 2 other brands. The "Popular" part is DORMAN 926959.

This group includes DORMAN 926959, AUTOTECNICA CY1419389 and FEL-PRO OFHA1001 and the remaining parts above.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2024 Jeep Gladiator — DORMAN 926959G.

This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2024 Jeep Gladiator — MOPAR 5047077AB.

This table covers the oil pans that hold the engine's oil sump. Read more

5 Oil Pan parts for the 2024 Jeep Gladiator come from 4 brands — MOPAR, DORMAN, SKP and 1 other brand. The "Popular" part is DORMAN 264542.

This group includes DORMAN 264542, MOPAR 68313584AD and MOPAR 68313581AA and the remaining parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Oil Pump parts are listed for the 2024 Jeep Gladiator, from ENGINETECH, MELLING and MOPAR.

This group includes ENGINETECH EP588, MELLING M588 and MOPAR 68297857AL.

This table covers the chains that drive the oil pump. Read more

This group shows a single part: MELLING 1072.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2024 Jeep Gladiator — MELLING BT7034.

This table covers the pickup tubes and screens that feed the oil pump. Read more

2 Oil Pump Pickup Tube / Screen parts for the 2024 Jeep Gladiator come from 2 brands — MELLING and MOPAR.

This group includes MELLING 429S and MOPAR 68323867AA.

This table covers the Oil Pump sprockets. Read more

This group shows a single part: MELLING S1254.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

4 Piston parts for the 2024 Jeep Gladiator come from MOPAR.

Part numbers include MOPAR 68223379AD, MOPAR 68223465AD and MOPAR 68223459AD, among others listed above.

This table covers the rings that seal each piston to the cylinder wall. Read more

3 Piston Ring parts for the 2024 Jeep Gladiator come from 2 brands — HASTINGS MANUFACTURING and MOPAR.

Part numbers include HASTINGS MANUFACTURING 2C5291, HASTINGS MANUFACTURING 2C5291S and MOPAR 68298025AB.

This table covers the rocker arms that transfer cam motion to the valves. Read more

4 Rocker Arm parts are listed for the 2024 Jeep Gladiator, from ENGINETECH, MELLING, MOPAR and 1 other brand.

This group includes ENGINETECH ER1332, MELLING MR1361 and MOPAR 5047896AD and the remaining parts above.

This table covers the timing chains that keep the cams in time with the crank. Read more

3 Timing Chain parts for the 2024 Jeep Gladiator come from 2 brands — MELLING and MOPAR.

This group includes MELLING 1080, MELLING 1071 and MOPAR 5047963AB.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

MELLING supplies both parts for the 2024 Jeep Gladiator.

This group includes MELLING 31080SX and MELLING 31080S.

This table covers the gaskets that seal the Timing Chain Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MOPAR 68228480AA.

This table covers the guides and dampers that keep the timing chain on its path. Read more

8 Timing Chain Guide / Damper parts for the 2024 Jeep Gladiator come from 2 brands — MELLING and MOPAR. The "Popular" part is MELLING BT7017.

Listed part numbers: MELLING BT7017, MELLING BG5084 and MELLING BT5020, plus the other parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Timing Chain Tensioner parts are listed for the 2024 Jeep Gladiator, from MOPAR and MELLING. MELLING BT5112 carries the "Popular" badge.

This group includes MELLING BT5112, MELLING BT5113 and MOPAR 5048019AC and the remaining parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Timing Cover Gasket parts are listed for the 2024 Jeep Gladiator, from AJUSA and MAHLE / CLEVITE.

Part numbers include AJUSA 77005100, AJUSA 01429400 and MAHLE / CLEVITE JV5279.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2024 Jeep Gladiator — MAHLE / CLEVITE 67972.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

One part is listed for the 2024 Jeep Gladiator — MELLING S1255.

This table covers the Timing Idler sprockets. Read more

This group shows a single part: MELLING S1253.

This table covers the adjusters that set valve lash. Read more

MOPAR supplies the 3 Valve Adjuster parts for the 2024 Jeep Gladiator.

This group includes MOPAR 5047979AA, MOPAR 5047883AC and MOPAR 5047883AD.