2025 Jeep Gladiator Engine Parts

This table covers the camshafts that open the valves. Read more

MOPAR supplies the 4 Camshaft parts for the 2025 Jeep Gladiator.

Listed part numbers: MOPAR 5048029AC, MOPAR 5048030AD and MOPAR 68661147AB, plus the other parts above.

This table covers the Connecting Rod bolts. Read more

This group shows a single part: MOPAR 6509128AA.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts are listed for the 2025 Jeep Gladiator, from MAHLE / CLEVITE and MOPAR.

This group includes MAHLE / CLEVITE CS55401 and MOPAR 68297851AB.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts for the 2025 Jeep Gladiator come from MOPAR. The "Popular" part is MOPAR 68242633AA.

This group includes MOPAR 68242633AA, MOPAR 68242631AA and MOPAR 68242636AA and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Crankshaft Seal parts for the 2025 Jeep Gladiator come from 2 brands — MAHLE / CLEVITE and MOPAR.

Part numbers include MAHLE / CLEVITE JV1759 and MOPAR 68079589AA.

This table covers the cylinder heads that close the top of the block. Read more

2 Cylinder Head parts for the 2025 Jeep Gladiator come from MOPAR.

Part numbers include MOPAR 68293289AB and MOPAR 68293288AB.

This table covers the Cylinder Head Alignment Dowel pins. Read more

One part is listed for the 2025 Jeep Gladiator — MOPAR 6100997.

This table covers the bolts that clamp the cylinder head to the block. Read more

One part is listed for the 2025 Jeep Gladiator — MAHLE / CLEVITE GS33681.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Cylinder Head Gasket parts are listed for the 2025 Jeep Gladiator, from MOPAR, FEL-PRO and MAHLE / CLEVITE. MOPAR 68284905AA carries the "Popular" badge.

This group includes MOPAR 68284905AA, MOPAR 68284904AA and FEL-PRO 26782PT and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts are listed for the 2025 Jeep Gladiator, from MAHLE / CLEVITE, MOPAR and VICTOR REINZ.

Part numbers include MAHLE / CLEVITE HS55401, MOPAR 68297850AE and VICTOR REINZ 021135801.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: MOPAR 4556020AB.

This table covers the gaskets that seal the Cylinder Head Side Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

MOPAR supplies the 3 Cylinder Head Side Cover Gasket parts for the 2025 Jeep Gladiator.

This group includes MOPAR 4893805AB, MOPAR 4893804AC and MOPAR 4893805AC.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: MOPAR 4609325.

This table covers the Engine covers. Read more

MOPAR supplies the 3 Engine Cover parts for the 2025 Jeep Gladiator.

Listed part numbers: MOPAR 68293980AA, MOPAR 6MA00RXFAA and MOPAR 6BU43RXFAC.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

MOPAR supplies the 3 Engine Kit Gasket Set parts for the 2025 Jeep Gladiator.

Part numbers include MOPAR 68297850AC, MOPAR 68297850AD and MOPAR 68361495AA.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts for the 2025 Jeep Gladiator come from 3 brands — MELLING, MOPAR and SBI.

Listed part numbers: MELLING V3462, MOPAR 5048022AA and SBI 13462.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

MOPAR supplies the 3 Expansion Plug parts for the 2025 Jeep Gladiator.

Listed part numbers: MOPAR 68060349AA, MOPAR 6512292AA and MOPAR 6510082AA.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

2 Harmonic Balancer parts are listed for the 2025 Jeep Gladiator, from DAYCO and MOPAR.

Part numbers include DAYCO PB1707N and MOPAR 5184293AC.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

3 Intake Manifold parts for the 2025 Jeep Gladiator come from MOPAR.

Listed part numbers: MOPAR 5281803AA, MOPAR 68241844AF and MOPAR 68241844AG.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts are listed for the 2025 Jeep Gladiator, from MAHLE / CLEVITE and MOPAR.

This group includes MAHLE / CLEVITE MS20457 and MOPAR 68232614AA.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Plenum Gasket parts for the 2025 Jeep Gladiator come from 2 brands — FEL-PRO and MAHLE / CLEVITE.

Part numbers include FEL-PRO MS97205 and MAHLE / CLEVITE MS20456.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Intake Valve parts for the 2025 Jeep Gladiator come from 4 brands — MELLING, MOPAR, QUALCAST and 1 other brand.

This group includes MELLING V3461, MOPAR 5047917AA and QUALCAST 1013461 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

3 Motor Mount parts for the 2025 Jeep Gladiator come from 2 brands — ANCHOR and DEA / MARMON RIDE CONTROL.

Part numbers include ANCHOR 3578, ANCHOR 3579 and DEA / MARMON RIDE CONTROL A20121.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

2 Motor Mount Bracket parts for the 2025 Jeep Gladiator come from MOPAR.

Listed part numbers: MOPAR 68328258AE and MOPAR 68328259AE.

This table covers the isolators in an engine mount. Read more

MOPAR supplies the 4 Motor Mount Isolator parts for the 2025 Jeep Gladiator.

This group includes MOPAR 68620584AB, MOPAR 68620585AB and MOPAR 68620586AB and the remaining parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

28 Oil parts for the 2025 Jeep Gladiator come from 6 brands — VALVOLINE, MOBIL, LIQUI MOLY and 3 other brands. The "Popular" part is LIQUI MOLY 2208. They are grouped as Full Synthetic and High Mileage (>75,000 Miles), with Full Synthetic the largest group at 21 parts from VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts for the 2025 Jeep Gladiator come from 2 brands — HOLSTEIN and STANDARD MOTOR PRODUCTS.

Part numbers include HOLSTEIN 2OFH0003 and STANDARD MOTOR PRODUCTS OFH111.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2025 Jeep Gladiator — MAHLE / CLEVITE GS33753.

This table covers the Oil Cooler Hose pipes. Read more

This group shows a single part: MOPAR 68285547AB.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts for the 2025 Jeep Gladiator come from MOPAR.

Part numbers include MOPAR 68325245AA and MOPAR 68291413AA.

This table covers the drain plugs in the oil pan. Read more

2 Oil Drain Plug parts for the 2025 Jeep Gladiator come from 2 brands — DORMAN and MOPAR.

Listed part numbers: DORMAN 090172 and MOPAR 6513414AA.

This table covers the caps on the oil filler neck. Read more

This group shows a single part: MOTORAD MO205.

This table covers the Oil Filler tubes. Read more

This group shows a single part: MOPAR 68259971AB.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

15 Oil Filter parts for the 2025 Jeep Gladiator come from 14 brands — WIX, BOSCH, CHAMP / LUBER-FINER and 11 other brands. The "Popular" part is WIX WL10010XP.

The Economy section lists 8 options from BOSCH, CHAMP / LUBER-FINER, FRAM and 5 other brands — the catalog's value-priced group. BOSCH 72415WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX WL10010XP is listed in this group.

In the Standard Replacement grade, MOPAR, WIX, HASTINGS / BALDWIN and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is MOPAR 68191349AA.

This table covers the Oil Filter adapters. Read more

One part is listed for the 2025 Jeep Gladiator — MOPAR 68596318AB.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2025 Jeep Gladiator — MOPAR 68191356AB.

This table covers the Oil Filter covers. Read more

3 Oil Filter Cover parts are listed for the 2025 Jeep Gladiator, from MOPAR, MOTORAD and STANDARD MOTOR PRODUCTS.

Listed part numbers: MOPAR 68191350AA, MOTORAD MO327 and STANDARD MOTOR PRODUCTS OFC101.

This table covers the Oil Filter housings. Read more

5 Oil Filter Housing parts are listed for the 2025 Jeep Gladiator, from DORMAN, FEL-PRO, HOLSTEIN and 2 other brands. DORMAN 926959 carries the "Popular" badge.

This group includes DORMAN 926959, FEL-PRO OFHA1001 and HOLSTEIN 2OFH0003 and the remaining parts above.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: DORMAN 926959G.

This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: MOPAR 5047077AB.

This table covers the oil pans that hold the engine's oil sump. Read more

5 Oil Pan parts are listed for the 2025 Jeep Gladiator, from MOPAR, DORMAN, SKP and 1 other brand. DORMAN 264542 carries the "Popular" badge.

Listed part numbers: DORMAN 264542, MOPAR 68313584AD and MOPAR 68313581AA, plus the other parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Oil Pump parts for the 2025 Jeep Gladiator come from 3 brands — ENGINETECH, MELLING and MOPAR.

Part numbers include ENGINETECH EP588, MELLING M588 and MOPAR 68297857AL.

This table covers the chains that drive the oil pump. Read more

One part is listed for the 2025 Jeep Gladiator — MELLING 1072.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: MELLING BT7034.

This table covers the pickup tubes and screens that feed the oil pump. Read more

2 Oil Pump Pickup Tube / Screen parts are listed for the 2025 Jeep Gladiator, from MELLING and MOPAR.

Part numbers include MELLING 429S and MOPAR 68323867AA.

This table covers the Oil Pump sprockets. Read more

One part is listed for the 2025 Jeep Gladiator — MELLING S1254.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

MOPAR supplies the 4 Piston parts for the 2025 Jeep Gladiator.

Part numbers include MOPAR 68223379AD, MOPAR 68223465AD and MOPAR 68223459AD, among others listed above.

This table covers the rings that seal each piston to the cylinder wall. Read more

One part is listed for the 2025 Jeep Gladiator — MOPAR 68298025AB.

This table covers the rocker arms that transfer cam motion to the valves. Read more

3 Rocker Arm parts for the 2025 Jeep Gladiator come from 3 brands — MELLING, MOPAR and SBI.

Listed part numbers: MELLING MR1361, MOPAR 5047896AD and SBI 1801332.

This table covers the timing chains that keep the cams in time with the crank. Read more

3 Timing Chain parts are listed for the 2025 Jeep Gladiator, from MELLING and MOPAR.

Part numbers include MELLING 1080, MELLING 1071 and MOPAR 5047963AB.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

2 Timing Chain & Component Kit parts for the 2025 Jeep Gladiator come from MELLING.

Listed part numbers: MELLING 31080SX and MELLING 31080S.

This table covers the gaskets that seal the Timing Chain Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2025 Jeep Gladiator — MOPAR 68228480AA.

This table covers the guides and dampers that keep the timing chain on its path. Read more

8 Timing Chain Guide / Damper parts are listed for the 2025 Jeep Gladiator, from MELLING and MOPAR. MELLING BT7017 carries the "Popular" badge.

Part numbers include MELLING BT7017, MELLING BG5084 and MELLING BT5020, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Timing Chain Tensioner parts for the 2025 Jeep Gladiator come from 2 brands — MOPAR and MELLING. The "Popular" part is MELLING BT5112.

Part numbers include MELLING BT5112, MELLING BT5113 and MOPAR 5048019AC, among others listed above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE JV5279.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE 67972.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

This group shows a single part: MELLING S1255.

This table covers the Timing Idler sprockets. Read more

One part is listed for the 2025 Jeep Gladiator — MELLING S1253.

This table covers the adjusters that set valve lash. Read more

3 Valve Adjuster parts for the 2025 Jeep Gladiator come from MOPAR.

This group includes MOPAR 5047979AA, MOPAR 5047883AC and MOPAR 5047883AD.

This table covers the Valve covers. Read more

One part is listed for the 2025 Jeep Gladiator — MOPAR 4893799AH.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Valve Cover Gasket parts for the 2025 Jeep Gladiator come from 3 brands — MOPAR, FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: FEL-PRO VS50960R, MAHLE / CLEVITE VS50919 and MOPAR 4893805AD, plus the other parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

2 Valve Guide parts for the 2025 Jeep Gladiator come from 2 brands — ENGINETECH and SBI.

This group includes ENGINETECH GD3282 and SBI 1403182.

This table covers the Valve seats. Read more

3 Valve Seat parts are listed for the 2025 Jeep Gladiator, from SBI and MOPAR.

This group includes MOPAR 5184167AB, SBI SB125066PM and SBI SB162567PM.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

3 Valve Spring parts are listed for the 2025 Jeep Gladiator, from MELLING, MOPAR and SBI.

This group includes MELLING VS1615, MOPAR 5184060AN and SBI 1601656.

This table covers the Valve Spring retainers. Read more

One part is listed for the 2025 Jeep Gladiator — MOPAR 5184126AB.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts are listed for the 2025 Jeep Gladiator, from MELLING and SBI.

This group includes MELLING VL1120 and SBI 1211082.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Valve Stem Seal parts for the 2025 Jeep Gladiator come from 3 brands — MAHLE / CLEVITE, MOPAR and SBI.

Listed part numbers: MAHLE / CLEVITE SS46057, MOPAR 5048025AA and SBI 1221442.