2025 Jeep Gladiator Suspension Parts

This table covers the cam bolts and plates used to set camber at the knuckle. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

3 Alignment Bolt / Camber Plate parts for the 2025 Jeep Gladiator come from 2 brands — DELPHI and DORMAN.

Listed part numbers: DELPHI TAL10027, DELPHI TAL10144 and DORMAN 545239.

This table covers the Alignment Caster / Camber bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DELPHI supplies both parts for the 2025 Jeep Gladiator.

Part numbers include DELPHI TAL10134 and DELPHI TAL10135.

This table covers the ball joints that articulate each control arm at the knuckle. Read more

5 Ball Joint parts for the 2025 Jeep Gladiator come from 2 brands — MEVOTECH and MOPAR. The "Popular" part is MEVOTECH MS25575.

In the Daily Driver grade, MEVOTECH and MOPAR supply 3 parts: grouped for everyday commuting duty. A representative part number is MEVOTECH MS25575.

In the Premium grade, MEVOTECH supplies 2 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is MEVOTECH TXMS25575.

This group includes MEVOTECH MS25575, MEVOTECH MS25574 and MOPAR 68531030AB and the remaining parts above.

This table covers the bump stops that limit suspension travel. Read more

MOPAR supplies the 4 Bump Stop parts for the 2025 Jeep Gladiator.

This group includes MOPAR 52060428AB, MOPAR 68341367AD and MOPAR 68341487AB and the remaining parts above.

This table covers the coil springs that carry vehicle weight at each corner. Typical signs include a sagging corner, a clunk through the spring, or a broken coil that you can see from the wheel well. Replace springs in axle pairs and inspect the seats and isolators while the spring is out. Read more

5 Coil Spring parts are listed for the 2025 Jeep Gladiator, from MOPAR and BILSTEIN.

Listed part numbers: BILSTEIN 53323873, MOPAR 68607502AB and MOPAR 68607503AB, plus the other parts above.

This table covers the rubber and polyurethane isolators that seat coil springs. Typical signs include a squeak from the spring pocket, or a spring that has walked off its seat. Replace the isolator whenever the spring is out — a crushed seat will noise a brand-new spring. Read more

2 Coil Spring Seat / Insulator parts for the 2025 Jeep Gladiator come from 2 brands — BILSTEIN and MOPAR.

Listed part numbers: BILSTEIN 14100093 and MOPAR 68341485AA.

This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm. Read more

32 Control Arm parts for the 2025 Jeep Gladiator come from 7 brands — MEVOTECH, MOPAR, MOOG and 4 other brands. The "Popular" part is MEVOTECH CMS251147. They are grouped as Daily Driver, Economy and Upgrade Kit, with Daily Driver the largest group at 22 parts from MOPAR, MEVOTECH, MOOG and 1 other brand.

This table covers the bushings pressed into each control arm. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: MOPAR 68332999AB.

This table covers the Leveling kits. Read more

One part is listed for the 2025 Jeep Gladiator — BILSTEIN 53350541.

This table covers the Ride Height sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

2 Ride Height Sensor parts for the 2025 Jeep Gladiator come from MOPAR.

Part numbers include MOPAR 68295927AB and MOPAR 68335594AA.

This table covers the shocks and struts that damp wheel motion. Typical signs include a nose that keeps bouncing, cupped tires, or fluid weeping down the body. Replace shocks or struts in axle pairs and renew the mounts if they are torn or collapsed. Read more

32 Shock / Strut parts for the 2025 Jeep Gladiator come from 5 brands — RANCHO, BILSTEIN, MONROE and 2 other brands. The "Popular" part is RANCHO RS55069. They are grouped as Adjustable Performance, Economy, Heavy Duty, Increased Handling/Stability and Original Ride Quality, with Heavy Duty the largest group at 10 parts from RANCHO and BILSTEIN.

This table covers the Shock / Strut bellows. Read more

One part is listed for the 2025 Jeep Gladiator — MONROE SA1997.

This table covers the Sway Bar assemblies. Read more

5 Sway Bar Assembly parts for the 2025 Jeep Gladiator come from MOPAR.

This group includes MOPAR 68530757AD, MOPAR 68341432AB and MOPAR 68341496AC and the remaining parts above.

This table covers the brackets that mount the Sway Bar. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

2 Sway Bar Bracket parts for the 2025 Jeep Gladiator come from MOPAR.

This group includes MOPAR 68674540AA and MOPAR 68674541AA.

This table covers the bushings that clamp the anti-roll bar to the chassis. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

5 Sway Bar Bushing parts for the 2025 Jeep Gladiator come from 2 brands — MOPAR and MOOG. The "Popular" part is MOPAR 68251384AB.

Listed part numbers: MOPAR 68251384AB, MOOG K202822 and MOPAR 68341508AB, plus the other parts above.

This table covers the links that connect the anti-roll bar to each control arm or strut. Typical signs include a clunk on one wheel over a driveway, or a rattle that goes away when you lean on the bar. Replace links in pairs; a seized stud often takes the bushing with it. Read more

5 Sway Bar Link parts for the 2025 Jeep Gladiator come from 4 brands — MEVOTECH, DELPHI, MOPAR and 1 other brand. The "Popular" part is MEVOTECH MS258163.

Daily Driver: 4 parts, from MEVOTECH, DELPHI, MOPAR and 1 other brand. A representative part number is MEVOTECH MS258163.

Premium: 1 part, from MEVOTECH. A representative part number is MEVOTECH TXMS258163.

Part numbers include MEVOTECH MS258163, DELPHI TC8754 and MOPAR 68361275AC, among others listed above.

This table covers the track bars that locate the axle laterally. Read more

9 Track Bar parts are listed for the 2025 Jeep Gladiator, from MOPAR, RANCHO, MEVOTECH and 4 other brands. MEVOTECH CMS251260 carries the "Popular" badge.

The Daily Driver section: 3 options from MOPAR and MEVOTECH. MEVOTECH CMS251260 is listed in this group.

In the Economy grade, DORMAN, FVP and ULTRA-POWER supply 3 parts: the catalog's value-priced group. A representative part number is DORMAN 522385.

In the Performance grade, RANCHO supplies 2 parts: engineered beyond original-equipment specification. A representative part number is RANCHO RS66168B.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Part numbers include MEVOTECH CMS251260, MOPAR 68524201AA and MOPAR 68522795AA, among others listed above.

This table covers the Track Bar bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Track Bar Bushing parts are listed for the 2025 Jeep Gladiator, from DORMAN and FVP.

This group includes DORMAN 540801 and FVP BTK81569.