2026 Jeep Gladiator Electrical Parts

This table covers the alternators that charge the battery and run the electrical load. Typical signs include dim lights at idle, a battery lamp, or a growl from the charging pulley. Load-test the battery and inspect the belt and grounds — a bad ground mimics a failed alternator. Read more

One part is listed for the 2026 Jeep Gladiator — MOPAR 68429970AC.

This table covers the brackets that mount the Alternator / Generator. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

One part is listed for the 2026 Jeep Gladiator — MOPAR 5281455AA.

This table covers the positive and ground cables that run from the battery. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

One part is listed for the 2026 Jeep Gladiator — MOPAR 68606641AA.

This table covers the Battery Current sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

One part is listed for the 2026 Jeep Gladiator — MOPAR 68289207AC.

This table covers the Battery Heat shields. Typical signs include a bent shield rubbing a rotor, or rust-through that leaves the backing open. A rubbing shield will eat a new rotor. Straighten or replace it before the wheel goes back on. Read more

MOPAR supplies both parts for the 2026 Jeep Gladiator.

This group includes MOPAR 68294412AC and MOPAR 68307803AC.

This table covers the trays the battery sits in. Read more

This group shows a single part: MOPAR 68275818AD.

This table covers the Blind Spot Detection sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

One part is listed for the 2026 Jeep Gladiator — MOPAR 68416989AC.

This table covers the body-control modules that run lighting, locks and wipers. Read more

One part is listed for the 2026 Jeep Gladiator — MOPAR 68678847AC.

This table covers the brackets that mount the Body Control Module (BCM). Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

One part is listed for the 2026 Jeep Gladiator — MOPAR 68342286AB.

This table covers the replacement fuses for this vehicle's fuse boxes. Typical signs include one circuit dead while its neighbor still works, or a fuse that blows again as soon as you replace it. Match amperage and fuse type. A repeat blow means a short — find it before the next fuse. Read more

7 Fuse parts for the 2026 Jeep Gladiator come from MOPAR. The "Popular" part is MOPAR 68202896AA.

In the 10 Amp grade, MOPAR supplies 1 part: grouped under the catalog's "10 Amp" designation — the notes column spells out what sets them apart. A representative part number is MOPAR 68100731AB.

The 15 Amp section lists 1 option from MOPAR — grouped under the catalog's "15 Amp" designation — the notes column spells out what sets them apart. MOPAR 68100745AB is listed in this group.

The 20 Amp section lists 2 options from MOPAR — grouped under the catalog's "20 Amp" designation — the notes column spells out what sets them apart. MOPAR 68202896AA is listed in this group.

In the 25 Amp grade, MOPAR supplies 1 part: grouped under the catalog's "25 Amp" designation — the notes column spells out what sets them apart. A representative part number is MOPAR 68100747AB.

In the 30 Amp grade, MOPAR supplies 1 part: grouped under the catalog's "30 Amp" designation — the notes column spells out what sets them apart. A representative part number is MOPAR 68144653AA.

The 40 Amp section lists 1 option from MOPAR — grouped under the catalog's "40 Amp" designation — the notes column spells out what sets them apart. MOPAR 68377879AA is listed in this group.

Listed part numbers: MOPAR 68202896AA, MOPAR 68100731AB and MOPAR 68100745AB, plus the other parts above.

This table covers the fuse blocks that hold this vehicle's fuses. Read more

MOPAR supplies both parts for the 2026 Jeep Gladiator.

This group includes MOPAR 68707788AA and MOPAR 68707789AA.

This table covers the Fuse Box covers. Read more

This group shows a single part: MOPAR 68370035AB.

This table covers the horns mounted in the front of the vehicle. Read more

4 Horn parts for the 2026 Jeep Gladiator come from MOPAR.

Part numbers include MOPAR 68284211AA, MOPAR 68284212AA and MOPAR 68297656AB, among others listed above.

This table covers the receivers that pick up the key-fob unlock signal. Read more

MOPAR supplies the 3 Keyless Entry Module / Receiver parts for the 2026 Jeep Gladiator.

This group includes MOPAR 68068148AA, MOPAR 68583984AB and MOPAR 68583986AB.

This table covers the key fobs that lock, unlock and start the vehicle. Read more

MOPAR supplies the 5 Keyless Entry Remote parts for the 2026 Jeep Gladiator.

Part numbers include MOPAR 68384453AD, MOPAR 68384456AE and MOPAR 68384457AE, among others listed above.

This table covers the Park Assist (PAS) Camera modules. Typical signs include a cluster of unrelated faults, a no-communication code, or a module that will not sleep. Confirm power, ground and programming compatibility in the notes. Modules are rarely plug-and-play across years. Read more

3 Park Assist (PAS) Camera Module parts for the 2026 Jeep Gladiator come from MOPAR.

Part numbers include MOPAR 4672768AE, MOPAR 4672769AE and MOPAR 68516818AE.

This table covers the ultrasonic park-aid sensors in the bumper. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

One part is listed for the 2026 Jeep Gladiator — MOPAR 5YV68TZZAA.

This table covers the Power inverters. Read more

MOPAR supplies the 4 Power Inverter parts for the 2026 Jeep Gladiator.

This group includes MOPAR 68547759AA, MOPAR 68312754AC and MOPAR 68375110AB and the remaining parts above.

This table covers the starter motors that crank the engine. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

2 Starter Motor parts are listed for the 2026 Jeep Gladiator, from WAI GLOBAL and BOSCH.

In the New grade, WAI GLOBAL supplies 1 part: brand-new units rather than rebuilt ones. A representative part number is WAI GLOBAL 16431N.

In the Remanufactured grade, BOSCH supplies 1 part: factory-rebuilt units with new wear components. A representative part number is BOSCH SR6537X.

Listed part numbers: WAI GLOBAL 16431N and BOSCH SR6537X.