13 Ignition parts are listed for the 2026 Jeep Gladiator, in 6 part types, covering the 3.6L V6 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2026 Jeep Gladiator, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. 10 parts of the 13 listed are Camshaft Position Sensor (4 parts), Crankshaft Position Sensor (3 parts) and Ignition Coil (3 parts). The other 3 part types cover the remaining 3 parts.
The 2026 Jeep Gladiator came with a single engine, the 3.6L V6, and every part is verified against it.
6 brands supply ignition parts for the 2026 Jeep Gladiator, led by MOPAR (5 parts), HOLSTEIN (3 parts) and WALKER PRODUCTS (2 parts), plus 3 more brands. Quality grades include Standard Replacement and Economy.
Each part number listed for the 2026 Jeep Gladiator opens a page with every vehicle that part fits.
Camshaft Position Sensor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HOLSTEIN | 2CAM0371 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HELLA | 358380701 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Mojave or Mojave X or Rubicon or Rubicon X or Sport or Sport S or Texas Trail or Willys | View on Amazon |
| MOPAR | 5149141AF | 🇺🇸 US 🇨🇦 CA | Includes Mounting Bolt | View on Amazon |
| WALKER PRODUCTS | 2351246 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Sensor Only | View on Amazon |
This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
4 Camshaft Position Sensor parts for the 2026 Jeep Gladiator come from 4 brands — HOLSTEIN, HELLA, MOPAR and 1 other brand.
The Economy section lists 1 option from HOLSTEIN — the catalog's value-priced group. HOLSTEIN 2CAM0371 is listed in this group.
In the Standard Replacement grade, HELLA, MOPAR and WALKER PRODUCTS supply 3 parts: built to original-equipment specification. A representative part number is HELLA 358380701.
Part numbers include HOLSTEIN 2CAM0371, HELLA 358380701 and MOPAR 5149141AF, among others listed above.
Crankshaft Position Sensor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HOLSTEIN | 2CRK0358 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR | 68079375AB | 🇺🇸 US 🇨🇦 CA | Fits 24V VVT Engine. with Start StopCrew Cab | View on Amazon |
| WALKER PRODUCTS | 2351691 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Sensor Only | View on Amazon |
This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
3 Crankshaft Position Sensor parts for the 2026 Jeep Gladiator come from 3 brands — HOLSTEIN, MOPAR and WALKER PRODUCTS.
The Economy section: 1 option from HOLSTEIN. HOLSTEIN 2CRK0358 is listed in this group.
Standard Replacement: 2 parts, from MOPAR and WALKER PRODUCTS. A representative part number is MOPAR 68079375AB.
This group includes HOLSTEIN 2CRK0358, MOPAR 68079375AB and WALKER PRODUCTS 2351691.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HOLSTEIN | 2IGC0576 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DENSO | 6735206 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Direct Ignition Coil or Coil On Plug | View on Amazon |
| STANDARD MOTOR PRODUCTS | UF807 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
3 Ignition Coil parts for the 2026 Jeep Gladiator come from 3 brands — HOLSTEIN, DENSO and STANDARD MOTOR PRODUCTS.
The Economy section: 1 option from HOLSTEIN. HOLSTEIN 2IGC0576 is listed in this group.
Standard Replacement: 2 parts, from DENSO and STANDARD MOTOR PRODUCTS. A representative part number is DENSO 6735206.
Part numbers include HOLSTEIN 2IGC0576, DENSO 6735206 and STANDARD MOTOR PRODUCTS UF807.
Spark Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR | 68225755AA | 🇺🇸 US 🇨🇦 CA | Fits 24V VVT Engine. with Start StopCrew Cab | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
One part is listed for the 2026 Jeep Gladiator — MOPAR 68225755AA.
Spark Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR | 5184778AB | 🇺🇸 US 🇨🇦 CA | Spark Plug Well Gasket | View on Amazon |
This table covers the gaskets that seal the Spark Plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: MOPAR 5184778AB.
Spark Plug Tube
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR | 4893868AB | 🇺🇸 US 🇨🇦 CA | Fits 24V VVT Engine. with Start StopCrew Cab | View on Amazon |
This table covers the Spark Plug tubes.
One part is listed for the 2026 Jeep Gladiator — MOPAR 4893868AB.
Buying Ignition Parts for a 2026 Jeep Gladiator
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 3.6L V6 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Camshaft Position Sensor and Crankshaft Position Sensor .
Frequently Asked Questions
How many ignition parts fit the 2026 Jeep Gladiator?
Our catalog currently lists 13 ignition parts for the 2026 Jeep Gladiator across 6 subcategories and 6 brands, covering the 3.6L V6 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 2026 Jeep Gladiator?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2026 Jeep Gladiator was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2026 Jeep Gladiator?
Every part on this page is matched to the 3.6L V6 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2026 Jeep Gladiator
Ignition Parts for Other Jeep Gladiator Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.