The 2008 Kenworth T270 has 5 interior parts with verified fitment on this page — 3 part types and 2 brands, covering both the 6.7L L6 DIESEL Turbocharged and the 8.3L L6 DIESEL Turbocharged. Each part includes a manufacturer part number and application notes.
The interior on the 2008 Kenworth T270 covers cabin hardware — seat components, handles, switch bezels, carpet, pedals and the pieces that take daily wear. All 5 listed parts are Shift Boot (2 parts), Window Regulator & Motor Assembly (2 parts) and Heater Control Knob (1 part).
The 2008 Kenworth T270 was sold with both the 6.7L L6 DIESEL Turbocharged and the 8.3L L6 DIESEL Turbocharged. All 5 parts on this page fit every engine.
The most listed brands for 2008 Kenworth T270 interior parts are DORMAN (3 parts) and ULTRA-POWER (2 parts).
Each part number listed for the 2008 Kenworth T270 opens a page with every vehicle that part fits.
Heater Control Knob
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2008 T270 engines | 7025402 | 🇺🇸 US 🇨🇦 CA | Bergstrom HVAC System | View on Amazon |
This table covers the Heater Control knobs.
One part is listed for the 2008 Kenworth T270 — DORMAN 7025402.
Shift Boot
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2008 T270 engines | 9245406 | 🇺🇸 US 🇨🇦 CA | Round Boot | View on Amazon |
| DORMAN Fits: all 2008 T270 engines | 9245405 | 🇺🇸 US 🇨🇦 CA | Square Boot | View on Amazon |
This table covers the Shift boots. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn.
DORMAN supplies both parts for the 2008 Kenworth T270. All of them fit every engine offered in the 2008 T270.
Part numbers include DORMAN 9245406 and DORMAN 9245405.
Window Regulator & Motor Assembly
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ULTRA-POWER Fits: all 2008 T270 engines | 7415403 | 🇺🇸 US 🇨🇦 CA | Front LEFTPWR | View on Amazon |
| ULTRA-POWER Fits: all 2008 T270 engines | 7415404 | 🇺🇸 US 🇨🇦 CA | Front RightPower | View on Amazon |
This table covers combined regulator-and-motor assemblies for a door.
ULTRA-POWER supplies both parts for the 2008 Kenworth T270. All of them fit every engine offered in the 2008 T270.
Part numbers include ULTRA-POWER 7415403 and ULTRA-POWER 7415404.
Buying Interior Parts for a 2008 Kenworth T270
On this vehicle, the interior covers cabin hardware — seat components, handles, switch bezels, carpet, pedals and the pieces that take daily wear.
- You do not need to pick an engine: every interior part on this page fits both the 6.7L L6 DIESEL Turbocharged and the 8.3L L6 DIESEL Turbocharged.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the retainer clips with any panel removal — they are cheap insurance against squeaks.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Shift Boot and Window Regulator & Motor Assembly .
Frequently Asked Questions
How many interior parts fit the 2008 Kenworth T270?
Our catalog currently lists 5 interior parts for the 2008 Kenworth T270 across 3 subcategories and 2 brands, covering both the 6.7L L6 DIESEL Turbocharged and the 8.3L L6 DIESEL Turbocharged. Each part is matched to the engine(s) it fits.
Do interior parts differ between 2008 Kenworth T270 engines?
No. On this page every interior part fits both the 6.7L L6 DIESEL Turbocharged and the 8.3L L6 DIESEL Turbocharged. You do not need to pick an engine to choose the right row — use the notes for position and trim.
What are the signs of interior problems on a 2008 Kenworth T270?
Common symptoms include a door handle that works only from outside, sagging headliner, a window switch that needs two presses, or seat adjusters that stick. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the retainer clips with any panel removal — they are cheap insurance against squeaks.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2008 Kenworth T270 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2008 Kenworth T270?
Every part on this page already fits both the 6.7L L6 DIESEL Turbocharged and the 8.3L L6 DIESEL Turbocharged. Then interior plastics are often color- and trim-specific — check the notes column against your trim level before ordering. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2008 Kenworth T270
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.