2004 Kia Sorento Drivetrain Parts

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Axle Shaft Bearing parts are listed for the 2004 Kia Sorento, from BECK/ARNLEY, WJB / INMOTION PARTS, BCA and 1 other brand.

In the Economy grade, BECK/ARNLEY and WJB / INMOTION PARTS supply 2 parts: the catalog's value-priced group. A representative part number is BECK/ARNLEY 0514175.

The Standard Replacement section lists 2 options from BCA and TIMKEN — built to original-equipment specification. BCA NBRW101 is listed in this group.

This group includes BECK/ARNLEY 0514175, WJB / INMOTION PARTS WBRW101 and BCA NBRW101 and the remaining parts above.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: KIA 0K20133065.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

14 CV Axle parts for the 2004 Kia Sorento come from 6 brands — CARDONE, FAMOUS BRAND, APWI and 3 other brands. The "Popular" part is APWI KA8004A.

The Economy section: 4 options from CARDONE and FAMOUS BRAND. CARDONE 608126 is listed in this group.

Standard Replacement: 10 parts, from APWI, TOP NOTCH, CARDONE and 2 other brands. A representative part number is APWI KA8004A.

This table covers the constant-velocity joints at each end of a drive axle. Read more

4 CV Joint parts for the 2004 Kia Sorento come from 4 brands — APWI, DANA, DORMAN and 1 other brand.

Listed part numbers: APWI GM5108, DANA 2510140055 and DORMAN 932108, plus the other parts above.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

5 CV Joint Boot parts for the 2004 Kia Sorento come from 2 brands — MEVOTECH and BECK/ARNLEY. The "Popular" part is MEVOTECH DX556.

Part numbers include MEVOTECH DX556, BECK/ARNLEY 1032544 and BECK/ARNLEY 1033033, among others listed above.

This table covers the bearings and races that support the differential carrier. Read more

6 Differential Carrier Bearing / Race parts for the 2004 Kia Sorento come from 5 brands — TIMKEN, WJB / INMOTION PARTS, SCHAEFFLER and 2 other brands. The "Popular" part is WJB / INMOTION PARTS WT32210.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS WT32210 is listed in this group.

Standard Replacement: 4 parts, from TIMKEN, SCHAEFFLER and SKF. A representative part number is TIMKEN 32210.

1 further part sits outside the graded sections, with the same engine-level match.

Listed part numbers: WJB / INMOTION PARTS WT32210 and TIMKEN 32210, plus the other parts above.

This table covers the bearings and races on the differential pinion. Read more

16 Differential Pinion Bearing / Race parts are listed for the 2004 Kia Sorento, from TIMKEN, WJB / INMOTION PARTS, BCA and 2 other brands. WJB / INMOTION PARTS WT32207 carries the "Popular" badge.

Economy: 4 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WT32207.

The Standard Replacement section: 12 options from TIMKEN, BCA, SCHAEFFLER and 1 other brand. TIMKEN 30306 is listed in this group.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Pinion Seal parts for the 2004 Kia Sorento come from 2 brands — SKF and WJB / INMOTION PARTS.

Part numbers include SKF 15762A and WJB / INMOTION PARTS WS15762A.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

TIMKEN supplies both parts for the 2004 Kia Sorento.

Part numbers include TIMKEN 225225 and TIMKEN 1932S.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

15 Drive Shaft parts are listed for the 2004 Kia Sorento, from DORMAN, SKP, CARDONE and 5 other brands. SKP SK936200 carries the "Popular" badge.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

12 Drive Shaft Center Support Bearing parts are listed for the 2004 Kia Sorento, from WESTAR, BCA, DORMAN and 7 other brands. DORMAN 934601 carries the "Popular" badge.

Economy: 5 parts, from WESTAR, DORMAN, SKP and 1 other brand. A representative part number is DORMAN 934601.

The Standard Replacement section: 7 options from BCA, ANCHOR, BECK/ARNLEY and 3 other brands. ANCHOR 6077 is listed in this group.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

10 Gear Oil parts for the 2004 Kia Sorento come from VALVOLINE. The "Popular" part is VALVOLINE VV820.

The SAE 75W-90 section lists 6 options from VALVOLINE — grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. VALVOLINE VV820 is listed in this group.

The SAE 80W-90 section lists 4 options from VALVOLINE — grouped under the catalog's "SAE 80W-90" designation — the notes column spells out what sets them apart. VALVOLINE VV831 is listed in this group.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

19 Transfer Case Fluid parts for the 2004 Kia Sorento come from 4 brands — VALVOLINE, ACDELCO, MOBIL and 1 other brand. The "Popular" part is ACDELCO 109243.

The Dexron section lists 7 options from VALVOLINE, ACDELCO and MOBIL — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.

The Mercon section lists 1 option from VALVOLINE — grouped under the catalog's "Mercon" designation — the notes column spells out what sets them apart. VALVOLINE 822345 is listed in this group.

The Multi-Vehicle section lists 6 options from VALVOLINE and MOBIL — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. MOBIL 126505 is listed in this group.

The Type III (H) section lists 2 options from ACDELCO — grouped under the catalog's "Type III (H)" designation — the notes column spells out what sets them apart. ACDELCO 109240 is listed in this group.

The Type T-4 (Type T-IV) section lists 2 options from IDEMITSU — grouped under the catalog's "Type T-4 (Type T-IV)" designation — the notes column spells out what sets them apart. IDEMITSU 30040093750 is listed in this group.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Transfer Case Input Shaft Bearing parts for the 2004 Kia Sorento come from 3 brands — WJB / INMOTION PARTS, SCHAEFFLER and SKF.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS RB6209N is listed in this group.

Standard Replacement: 2 parts, from SCHAEFFLER and SKF. A representative part number is SCHAEFFLER 6209.

Listed part numbers: WJB / INMOTION PARTS RB6209N, SCHAEFFLER 6209 and SKF 6209J.

This table covers the Transfer Case Input Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: NATIONAL M18161.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

One part is listed for the 2004 Kia Sorento — SCHAEFFLER SR3467.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Transfer Case Input Shaft Seal parts are listed for the 2004 Kia Sorento, from WJB / INMOTION PARTS, NATIONAL, BCA and 3 other brands. NATIONAL 710682 carries the "Popular" badge.

Listed part numbers: NATIONAL 710682, WJB / INMOTION PARTS WS710682 and BCA NS710682, plus the other parts above.

This table covers the Transfer Case motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

3 Transfer Case Motor parts are listed for the 2004 Kia Sorento, from DORMAN, LARES and WAI GLOBAL.

This group includes DORMAN 600820, LARES 30510 and WAI GLOBAL TC1042.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

14 Transfer Case Output Shaft Bearing parts are listed for the 2004 Kia Sorento, from BCA, WJB / INMOTION PARTS, NATIONAL and 2 other brands. WJB / INMOTION PARTS RB6207 carries the "Popular" badge.

Economy: 3 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS RB6207.

The Standard Replacement section: 11 options from BCA, NATIONAL, SKF and 1 other brand. BCA NB206 is listed in this group.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

2 Transfer Case Output Shaft Repair Sleeve parts for the 2004 Kia Sorento come from SCHAEFFLER.

This group includes SCHAEFFLER SR3499 and SCHAEFFLER SS3489.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Transfer Case Output Shaft Seal parts for the 2004 Kia Sorento come from 5 brands — NATIONAL, BCA, SCHAEFFLER and 2 other brands. The "Popular" part is NATIONAL 710403.

Part numbers include NATIONAL 710403, BCA NS710403 and SCHAEFFLER SS5261, among others listed above.

This table covers the seals at the Transfer Case Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Transfer Case Shift Shaft Seal parts are listed for the 2004 Kia Sorento, from BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS330385, NATIONAL 330385 and WJB / INMOTION PARTS WS330385.

This table covers the U-joints in the driveshaft. Read more

14 Universal Joint parts for the 2004 Kia Sorento come from 7 brands — SKF, GKN, DANA and 4 other brands. The "Popular" part is KIA 495983E100.

The Economy section: 1 option from DANA. DANA 25324251X is listed in this group.

Standard Replacement: 13 parts, from SKF, GKN, KIA and 4 other brands. A representative part number is KIA 495983E100.