2005 Kia Optima Automatic Transmission Parts

This table covers the Bushing kits. Read more

One part is listed for the 2005 Kia Optima — PA CARGO K41905J.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

11 Filter parts are listed for the 2005 Kia Optima, from VAICO, PA CARGO, PUROLATOR and 7 other brands. PA CARGO 41710L carries the "Popular" badge.

In the Economy grade, PA CARGO, PUROLATOR, AUTO EXTRA and 2 other brands supply 5 parts: the catalog's value-priced group. A representative part number is PA CARGO 41710L.

The Standard Replacement section lists 5 options from VAICO, WIX, BECK/ARNLEY and 1 other brand — built to original-equipment specification. WIX 51064 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the pans that hold automatic-transmission fluid. Read more

This group shows a single part: HYUNDAI 4528339000.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

2 Fluid Pump Repair Sleeve parts for the 2005 Kia Optima come from 2 brands — SCHAEFFLER and SKF.

Part numbers include SCHAEFFLER SR3502 and SKF 99182.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SKF 16984.

This table covers the Fluid temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

One part is listed for the 2005 Kia Optima — WELLS 5S7692.

This table covers the Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Output Shaft Bearing parts for the 2005 Kia Optima come from 3 brands — WJB / INMOTION PARTS, NATIONAL and BCA. The "Popular" part is WJB / INMOTION PARTS WT32009X.

The Economy section: 2 options from WJB / INMOTION PARTS. WJB / INMOTION PARTS WT32009X is listed in this group.

Standard Replacement: 4 parts, from NATIONAL and BCA. A representative part number is NATIONAL 32009X.

Part numbers include WJB / INMOTION PARTS WT32009X, WJB / INMOTION PARTS WT32006 and NATIONAL 32009X, among others listed above.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

3 Output Shaft Repair Sleeve parts are listed for the 2005 Kia Optima, from BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS99139, NATIONAL 99139 and WJB / INMOTION PARTS WS99139.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Output Shaft Seal parts are listed for the 2005 Kia Optima, from NATIONAL, WJB / INMOTION PARTS and SKF. SKF 16143 carries the "Popular" badge.

Part numbers include SKF 16143, NATIONAL 710977 and NATIONAL 710976, among others listed above.

This table covers the rebuild kits for this assembly. Read more

5 Rebuild Kit parts for the 2005 Kia Optima come from 2 brands — PA CARGO and TRANSTEC. The "Popular" part is PA CARGO K41900J.

The Banner Kit (Overhaul Kit + Friction Clutch Plates) section lists 1 option from PA CARGO — grouped under the catalog's "Banner Kit (Overhaul Kit + Friction Clutch Plates)" designation — the notes column spells out what sets them apart. PA CARGO DK4100LS is listed in this group.

The Deluxe Kit (Master Kit + Filter, Band & Common Bushings) section lists 1 option from PA CARGO — grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. PA CARGO MRK4100L is listed in this group.

In the Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) grade, PA CARGO supplies 1 part: grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO DK4100L.

The Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) section lists 2 options from PA CARGO and TRANSTEC — grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. PA CARGO K41900J is listed in this group.

Part numbers include PA CARGO K41900J, PA CARGO DK4100LS and PA CARGO MRK4100L, among others listed above.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

3 Shift Solenoid parts for the 2005 Kia Optima come from 3 brands — HYUNDAI, STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: HYUNDAI 4631339051, STANDARD MOTOR PRODUCTS TCS220 and WELLS 2N1295.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

4 Torque Converter Repair Sleeve parts for the 2005 Kia Optima come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand.

This group includes BCA NS99157, NATIONAL 99157 and SCHAEFFLER SR3483 and the remaining parts above.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Torque Converter Shaft Seal parts for the 2005 Kia Optima come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Listed part numbers: BCA NS320583, NATIONAL 320583 and SCHAEFFLER SS3759, plus the other parts above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

10 Transmission Fluid parts are listed for the 2005 Kia Optima, from VALVOLINE, PENTOSIN, LUBEGARD and 2 other brands. VALVOLINE VV3246 carries the "Popular" badge.

In the ATF +4 grade, PENTOSIN supplies 2 parts: grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. A representative part number is PENTOSIN 1058112.

In the Multi-Vehicle grade, VALVOLINE and LUBEGARD supply 5 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE VV3246.

In the SP-III (SP3) grade, BECK/ARNLEY supplies 1 part: grouped under the catalog's "SP-III (SP3)" designation — the notes column spells out what sets them apart. A representative part number is BECK/ARNLEY 2522003.

The SP-IV (SP 4) section lists 1 option from AISIN — grouped under the catalog's "SP-IV (SP 4)" designation — the notes column spells out what sets them apart. AISIN ATFSP4 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

8 Transmission Fluid Additive parts are listed for the 2005 Kia Optima, from LUBEGARD and ATP. LUBEGARD 19610 carries the "Popular" badge.

This group includes LUBEGARD 19610, LUBEGARD 60902 and ATP AT203 and the remaining parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Transmission Mount parts for the 2005 Kia Optima come from 5 brands — DEA / MARMON RIDE CONTROL, ANCHOR, BECK/ARNLEY and 2 other brands. The "Popular" part is DEA / MARMON RIDE CONTROL A7117.

This group includes DEA / MARMON RIDE CONTROL A7117, ANCHOR 9373 and BECK/ARNLEY 1041585 and the remaining parts above.