2009 Kia Sorento Drivetrain Parts

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Axle Shaft Bearing parts for the 2009 Kia Sorento come from 3 brands — BECK/ARNLEY, WJB / INMOTION PARTS and BCA. Every part fits both the 3.3L V6 and the 3.8L V6.

The Economy section lists 2 options from BECK/ARNLEY and WJB / INMOTION PARTS — the catalog's value-priced group. BECK/ARNLEY 0514175 is listed in this group.

In the Standard Replacement grade, BCA supplies 1 part: built to original-equipment specification. A representative part number is BCA NBRW101.

Part numbers include BECK/ARNLEY 0514175, WJB / INMOTION PARTS WBRW101 and BCA NBRW101.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

TIMKEN supplies both parts for the 2009 Kia Sorento. All of them fit every engine offered in the 2009 Sorento.

Part numbers include TIMKEN SL260188 and TIMKEN SL260189.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

14 CV Axle parts are listed for the 2009 Kia Sorento, from CARDONE, FAMOUS BRAND, APWI and 3 other brands. APWI KA8004A carries the "Popular" badge. All of them fit every engine offered in the 2009 Sorento.

Economy: 4 parts, from CARDONE and FAMOUS BRAND. A representative part number is CARDONE 608126.

The Standard Replacement section: 10 options from APWI, TOP NOTCH, CARDONE and 2 other brands. APWI KA8004A is listed in this group.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

4 CV Joint Boot parts are listed for the 2009 Kia Sorento, from BECK/ARNLEY and MEVOTECH. All of them fit every engine offered in the 2009 Sorento.

Part numbers include BECK/ARNLEY 1032544, BECK/ARNLEY 1033033 and MEVOTECH DX217, among others listed above.

This table covers the bearings and races that support the differential carrier. Read more

8 Differential Carrier Bearing / Race parts are listed for the 2009 Kia Sorento, from WJB / INMOTION PARTS, BCA, NATIONAL and 3 other brands. WJB / INMOTION PARTS WTA35 carries the "Popular" badge. All of them fit every engine offered in the 2009 Sorento.

Economy: 2 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WTA35.

The Standard Replacement section: 5 options from BCA, NATIONAL, SCHAEFFLER and 2 other brands. BCA NBA35 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Listed part numbers: WJB / INMOTION PARTS WTA35, WJB / INMOTION PARTS WT32210 and BCA NBA35, plus the other parts above.

This table covers the bearings and races on the differential pinion. Read more

20 Differential Pinion Bearing / Race parts for the 2009 Kia Sorento come from 8 brands — WJB / INMOTION PARTS, BCA, NATIONAL and 5 other brands. The "Popular" part is FAMOUS BRAND SM86610. Every part fits both the 3.3L V6 and the 3.8L V6.

The Economy section: 7 options from WJB / INMOTION PARTS and FAMOUS BRAND. FAMOUS BRAND SM86610 is listed in this group.

Standard Replacement: 13 parts, from BCA, NATIONAL, TIMKEN and 3 other brands. A representative part number is BCA NBM86610.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Pinion Seal parts are listed for the 2009 Kia Sorento, from SKF and WJB / INMOTION PARTS. All of them fit every engine offered in the 2009 Sorento.

Listed part numbers: SKF 15762A and WJB / INMOTION PARTS WS15762A.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: TIMKEN 225225.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

6 Drive Shaft parts for the 2009 Kia Sorento come from 5 brands — DORMAN, TOP NOTCH, USA STANDARD GEAR and 2 other brands. The "Popular" part is TOP NOTCH TN7510PS. 5 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: TOP NOTCH TN7510PS, USA STANDARD GEAR ZDS150368 and CARDONE 653506, plus the other parts above.

This table covers the flex joints in the driveshaft. Read more

One part is listed for the 2009 Kia Sorento — MOOG 676.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

VALVOLINE supplies the 10 Gear Oil parts for the 2009 Kia Sorento. VALVOLINE VV820 carries the "Popular" badge. All of them fit every engine offered in the 2009 Sorento.

In the SAE 75W-90 grade, VALVOLINE supplies 6 parts: grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE VV820.

In the SAE 80W-90 grade, VALVOLINE supplies 4 parts: grouped under the catalog's "SAE 80W-90" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE VV831.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

19 Transfer Case Fluid parts are listed for the 2009 Kia Sorento, from VALVOLINE, ACDELCO, MOBIL and 1 other brand. ACDELCO 109243 carries the "Popular" badge. All of them fit every engine offered in the 2009 Sorento.

In the Dexron grade, VALVOLINE, ACDELCO and MOBIL supply 7 parts: grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109243.

In the Mercon grade, VALVOLINE supplies 1 part: grouped under the catalog's "Mercon" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE 822345.

In the Multi-Vehicle grade, VALVOLINE and MOBIL supply 6 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 126505.

In the Type III (H) grade, ACDELCO supplies 2 parts: grouped under the catalog's "Type III (H)" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109240.

In the Type T-4 (Type T-IV) grade, IDEMITSU supplies 2 parts: grouped under the catalog's "Type T-4 (Type T-IV)" designation — the notes column spells out what sets them apart. A representative part number is IDEMITSU 30040093750.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Transfer Case Input Shaft Bearing parts are listed for the 2009 Kia Sorento, from WJB / INMOTION PARTS, SCHAEFFLER and SKF. All of them fit every engine offered in the 2009 Sorento.

Economy: 1 part, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS RB6209N.

The Standard Replacement section: 2 options from SCHAEFFLER and SKF. SCHAEFFLER 6209 is listed in this group.

This group includes WJB / INMOTION PARTS RB6209N, SCHAEFFLER 6209 and SKF 6209J.

This table covers the Transfer Case Input Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2009 Kia Sorento — NATIONAL M18161.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Transfer Case Input Shaft Seal parts for the 2009 Kia Sorento come from 5 brands — WJB / INMOTION PARTS, NATIONAL, BCA and 2 other brands. The "Popular" part is NATIONAL 710682. Every part fits both the 3.3L V6 and the 3.8L V6.

Listed part numbers: NATIONAL 710682, WJB / INMOTION PARTS WS710682 and BCA NS710682, plus the other parts above.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

13 Transfer Case Output Shaft Bearing parts for the 2009 Kia Sorento come from 5 brands — WJB / INMOTION PARTS, BCA, NATIONAL and 2 other brands. The "Popular" part is WJB / INMOTION PARTS RB6207. Every part fits both the 3.3L V6 and the 3.8L V6.

The Economy section: 3 options from WJB / INMOTION PARTS. WJB / INMOTION PARTS RB6207 is listed in this group.

Standard Replacement: 10 parts, from BCA, NATIONAL, SKF and 1 other brand. A representative part number is BCA NB206.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Transfer Case Output Shaft Seal parts are listed for the 2009 Kia Sorento, from NATIONAL, AUTO 7, BCA and 2 other brands. NATIONAL 710403 carries the "Popular" badge. All of them fit every engine offered in the 2009 Sorento.

This group includes NATIONAL 710403, AUTO 7 1260056 and BCA NS710403 and the remaining parts above.

This table covers the Transfer Case Overhaul kits. Read more

One part is listed for the 2009 Kia Sorento — USA STANDARD GEAR ZTBK4424.

This table covers the seals at the Transfer Case Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Shift Shaft Seal parts for the 2009 Kia Sorento come from 2 brands — NATIONAL and WJB / INMOTION PARTS. Every part fits both the 3.3L V6 and the 3.8L V6.

Part numbers include NATIONAL 330385 and WJB / INMOTION PARTS WS330385.

This table covers the U-joints in the driveshaft. Read more

KIA supplies both parts for the 2009 Kia Sorento. All of them fit every engine offered in the 2009 Sorento.

Part numbers include KIA 0W00125060A and KIA 495983E100.