2011 Kia Rondo Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

17 Coolant / Antifreeze parts are listed for the 2011 Kia Rondo, from PRESTONE, PEAK, VALVOLINE and 3 other brands. FVP MV5050GAL carries the "Popular" badge. All of them fit every engine offered in the 2011 Rondo.

The Compatible With All Colors section lists 1 option from PRESTONE — grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. PRESTONE AF3055 is listed in this group.

In the Economy grade, FVP, PEAK, PRESTONE and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is FVP MV5050GAL.

The Premium section lists 5 options from PRESTONE and PEAK — a step above OE specification in materials, tolerances or warranty terms. PRESTONE AF2100 is listed in this group.

The Standard Replacement section lists 7 options from VALVOLINE, BECK/ARNLEY, AISIN and 1 other brand — built to original-equipment specification. VALVOLINE ZXEL1 is listed in this group.

This table covers the seals at the Coolant Hose / Pipe. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: VICTOR REINZ 151118601.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

2 Coolant Reservoir Cap parts for the 2011 Kia Rondo come from 2 brands — CALORSTAT and DORMAN. Every part fits both the 2.4L L4 and the 2.7L V6.

This group includes CALORSTAT RC0161 and DORMAN 54018.

This table covers the Cooling Fan control modules. Read more

3 Cooling Fan Control Module parts for the 2011 Kia Rondo come from US MOTOR WORKS.

Part numbers include US MOTOR WORKS 16749, US MOTOR WORKS 16789 and US MOTOR WORKS 16795.

This table covers the adapters used to pressure-test this cooling system. Read more

2 Cooling System Tester Adapter parts are listed for the 2011 Kia Rondo, from GATES and STANT. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: GATES 31428 and STANT 12021.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

10 Radiator parts are listed for the 2011 Kia Rondo, from CSF, AGILITY, OSC and 4 other brands. CSF 3408 carries the "Popular" badge.

Economy: 2 parts, from GPD and TECHPRO. A representative part number is GPD 2961C.

The Standard Replacement section: 8 options from CSF, AGILITY, OSC and 2 other brands. CSF 3408 is listed in this group.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

9 Radiator Cap parts are listed for the 2011 Kia Rondo, from GATES, SKP, CALORSTAT and 2 other brands. SKP SK10233 carries the "Popular" badge.

The Locking Replacement section lists 1 option from GATES — grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. GATES 31534 is listed in this group.

The Standard Replacement section: 4 options from SKP, CALORSTAT, DORMAN and 1 other brand. SKP SK10233 is listed in this group.

4 ungrouped parts are not assigned to a grade, with the same engine-level match.

Listed part numbers: SKP SK10233, GATES 31534 and CALORSTAT RC0027, plus the other parts above.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

7 Radiator Fan Assembly parts for the 2011 Kia Rondo come from 6 brands — GPD, DORMAN, TECHPRO and 3 other brands. 1 part fits every engine; the other 6 are engine-specific.

The Economy section: 4 options from GPD, DORMAN and TECHPRO. DORMAN 621235 is listed in this group.

Standard Replacement: 3 parts, from AGILITY, UAC and VDO / CONTINENTAL. A representative part number is AGILITY 6023122.

This group includes DORMAN 621235, GPD 2811625 and GPD 2811626 and the remaining parts above.

This table covers the Radiator Fan resistors. Read more

One part is listed for the 2011 Kia Rondo — GATES FCM170.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

11 Radiator Hose parts for the 2011 Kia Rondo come from 4 brands — ACDELCO, GATES, CONTINENTAL and 1 other brand. The "Popular" part is ACDELCO 26593X.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

10 Temperature Sender / Sensor parts are listed for the 2011 Kia Rondo, from HOLSTEIN, WELLS, GPD and 5 other brands. HOLSTEIN 2CTS0091 carries the "Popular" badge. 4 parts fit every engine; the other 6 are engine-specific.

Economy: 4 parts, from HOLSTEIN, GPD and UNITED MOTOR PRODUCTS. A representative part number is HOLSTEIN 2CTS0091.

The Standard Replacement section: 6 options from WELLS, FOUR SEASONS, STANDARD MOTOR PRODUCTS and 2 other brands. FOUR SEASONS 37890 is listed in this group.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

20 Thermostat parts for the 2011 Kia Rondo come from 8 brands — MOTORAD, CALORSTAT, AISIN and 5 other brands. The "Popular" part is MOTORAD 5302170.

The Economy section: 1 option from AUTOTECNICA. AUTOTECNICA KI0720294 is listed in this group.

In the Heavy Duty grade, MOTORAD supplies 2 parts: rated for severe service. A representative part number is MOTORAD 5302170.

Premium: 2 parts, from MOTORAD. A representative part number is MOTORAD 7302180.

Standard Replacement: 15 parts, from MOTORAD, CALORSTAT, AISIN and 4 other brands. A representative part number is AISIN THK007.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Thermostat / Thermostat Housing / Water Outlet Seal parts are listed for the 2011 Kia Rondo, from FEL-PRO, VICTOR REINZ, GATES and 1 other brand. FEL-PRO 35921 carries the "Popular" badge.

This group includes FEL-PRO 35921, GATES 33661 and FEL-PRO 35918 and the remaining parts above.

This table covers the housings and outlets the thermostat sits in. Read more

7 Thermostat Housing / Water Outlet parts for the 2011 Kia Rondo come from 4 brands — FOUR SEASONS, MOTORAD, GATES and 1 other brand.

The Economy section: 1 option from DORMAN. DORMAN 9025195 is listed in this group.

Standard Replacement: 2 parts, from FOUR SEASONS and MOTORAD. A representative part number is FOUR SEASONS 86027.

4 further parts sit outside the graded sections, with the same engine-level match.

Listed part numbers: DORMAN 9025195, FOUR SEASONS 86027 and MOTORAD CH7027, plus the other parts above.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

18 Water Pump parts for the 2011 Kia Rondo come from 9 brands — SKP, GMB, FVP and 6 other brands. The "Popular" part is SKP SK42289.

The Economy section: 8 options from SKP, FVP, US MOTOR WORKS and 1 other brand. SKP SK42289 is listed in this group.

Standard Replacement: 10 parts, from GMB, AISIN, GATES and 2 other brands. A representative part number is AISIN WPK809.

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Water Pump Gasket parts are listed for the 2011 Kia Rondo, from FEL-PRO, VICTOR REINZ and AJUSA.

This group includes AJUSA 01226600, FEL-PRO 35813 and FEL-PRO 35802 and the remaining parts above.

This table covers the Water Pump Seal O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: FEL-PRO ES72872.