2011 Kia Rondo Electrical Parts

This table covers the alternators that charge the battery and run the electrical load. Typical signs include dim lights at idle, a battery lamp, or a growl from the charging pulley. Load-test the battery and inspect the belt and grounds — a bad ground mimics a failed alternator. Read more

10 Alternator / Generator parts are listed for the 2011 Kia Rondo, from PURE ENERGY, WAI GLOBAL, REMY and 3 other brands. PURE ENERGY 15598N carries the "Popular" badge.

In the New grade, PURE ENERGY and WAI GLOBAL supply 2 parts: brand-new units rather than rebuilt ones. A representative part number is PURE ENERGY 15598N.

In the Remanufactured grade, ACDELCO, FVP, PURE ENERGY and 3 other brands supply 6 parts: factory-rebuilt units with new wear components. A representative part number is ACDELCO 3342709.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the pulleys on the alternator shaft. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt. Read more

4 Alternator / Generator Pulley parts for the 2011 Kia Rondo come from 4 brands — ACDELCO, CONTINENTAL, LITENS and 1 other brand.

Part numbers include ACDELCO 37165P, CONTINENTAL 49731 and LITENS 930018A, among others listed above.

This table covers the batteries listed by group size and specification. Typical signs include slow cranking, a battery lamp, or a no-start after the vehicle sat overnight. Confirm group size and terminal layout in the notes. Clean the posts and the ground before condemning the battery. Read more

This group shows a single part: FULLRIVER FT75035.

This table covers the flasher units that blink the turn signals and hazards. Read more

2 Flasher parts for the 2011 Kia Rondo come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS. Every part fits both the 2.4L L4 and the 2.7L V6.

Listed part numbers: STANDARD MOTOR PRODUCTS EFL159 and WELLS 1R3637.

This table covers the replacement fuses for this vehicle's fuse boxes. Typical signs include one circuit dead while its neighbor still works, or a fuse that blows again as soon as you replace it. Match amperage and fuse type. A repeat blow means a short — find it before the next fuse. Read more

24 Fuse parts for the 2011 Kia Rondo come from 2 brands — BUSSMANN and LITTELFUSE. The "Popular" part is BUSSMANN ATM10. Every part fits both the 2.4L L4 and the 2.7L V6.

In the 10 Amp grade, BUSSMANN and LITTELFUSE supply 3 parts: grouped under the catalog's "10 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN ATM10.

The 125 Amp section lists 2 options from BUSSMANN and LITTELFUSE — grouped under the catalog's "125 Amp" designation — the notes column spells out what sets them apart. BUSSMANN AMI125 is listed in this group.

The 15 Amp section lists 3 options from BUSSMANN and LITTELFUSE — grouped under the catalog's "15 Amp" designation — the notes column spells out what sets them apart. BUSSMANN ATM15 is listed in this group.

The 150 Amp section lists 2 options from BUSSMANN and LITTELFUSE — grouped under the catalog's "150 Amp" designation — the notes column spells out what sets them apart. BUSSMANN AMI150B is listed in this group.

The 20 Amp section lists 3 options from BUSSMANN and LITTELFUSE — grouped under the catalog's "20 Amp" designation — the notes column spells out what sets them apart. BUSSMANN ATM20 is listed in this group.

In the 25 Amp grade, BUSSMANN and LITTELFUSE supply 3 parts: grouped under the catalog's "25 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN ATM25.

In the 30 Amp grade, BUSSMANN and LITTELFUSE supply 5 parts: grouped under the catalog's "30 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN ATM30.

The 40 Amp section lists 3 options from BUSSMANN and LITTELFUSE — grouped under the catalog's "40 Amp" designation — the notes column spells out what sets them apart. BUSSMANN FMX40 is listed in this group.

This table covers the horns mounted in the front of the vehicle. Read more

This group shows a single part: HELLA 011225901.

This table covers the speed sensors on the transmission, transfer case or ABS ring. Typical signs include a dead speedometer, harsh transmission shifts, or a code for vehicle speed. Inspect the tone wheel and the connector before replacing the sensor. Read more

22 Speed Sensor parts for the 2011 Kia Rondo come from 8 brands — VEMO, GPD, STANDARD MOTOR PRODUCTS and 5 other brands. The "Popular" part is GPD 1815601. 18 parts fit every engine; the other 4 are engine-specific.

The Economy section lists 13 options from VEMO, GPD, AUTOTECNICA and 1 other brand — the catalog's value-priced group. GPD 1815601 is listed in this group.

In the Standard Replacement grade, WELLS, ROSTRA, STANDARD MOTOR PRODUCTS and 1 other brand supply 8 parts: built to original-equipment specification. A representative part number is ROSTRA 501049.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the starter motors that crank the engine. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

16 Starter Motor parts are listed for the 2011 Kia Rondo, from DENSO, WAI GLOBAL, HL MANDO and 5 other brands. HL MANDO 12A1369 carries the "Popular" badge.

New: 7 parts, from HL MANDO, DENSO, WAI GLOBAL and 1 other brand. A representative part number is HL MANDO 12A1369.

Remanufactured: 9 parts, from REMY, TERREPOWER, PURE ENERGY and 4 other brands. A representative part number is PURE ENERGY 6975S.