2014 Kia Rio Automatic Transmission Parts

This table covers the Bushing kits. Read more

One part is listed for the 2014 Kia Rio — DURA-BOND TK30.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

RAYBESTOS POWERTRAIN supplies the 3 Clutch Plate Pack parts for the 2014 Kia Rio.

The Friction Plate Pack section lists 2 options from RAYBESTOS POWERTRAIN — grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN FRMHYUND08 is listed in this group.

In the Steel Plate Pack grade, RAYBESTOS POWERTRAIN supplies 1 part: grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN STMHYUND08.

Part numbers include RAYBESTOS POWERTRAIN FRMHYUND08, RAYBESTOS POWERTRAIN RHT96320 and RAYBESTOS POWERTRAIN STMHYUND08.

This table covers the Conductor plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

This group shows a single part: ACKOJA A52770039.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

9 Filter parts are listed for the 2014 Kia Rio, from VARIOUS MFR, VAICO, ATP and 4 other brands. ATP B458 carries the "Popular" badge.

In the Economy grade, VARIOUS MFR supplies 2 parts: the catalog's value-priced group. A representative part number is VARIOUS MFR PT99414.

The Standard Replacement section lists 5 options from VAICO, ATP, BECK/ARNLEY and 1 other brand — built to original-equipment specification. ATP B458 is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

Part numbers include ATP B458, VARIOUS MFR PT99414 and VARIOUS MFR PT99826, among others listed above.

This table covers the flexplates that connect the crankshaft to the torque converter. Read more

2 Flexplate parts for the 2014 Kia Rio come from 2 brands — ATP and PIONEER.

Listed part numbers: ATP Z585 and PIONEER FRA622.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

SUNSONG supplies both parts for the 2014 Kia Rio.

Part numbers include SUNSONG 5802166 and SUNSONG 5802165.

This table covers the pans that hold automatic-transmission fluid. Read more

4 Fluid Pan parts for the 2014 Kia Rio come from 4 brands — DORMAN, SKP, SPECTRA PREMIUM and 1 other brand.

Listed part numbers: DORMAN 265856, SKP SK265856 and SPECTRA PREMIUM TP0856, plus the other parts above.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2014 Kia Rio — ATP NG55.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2014 Kia Rio — DURA-BOND MIT21T.

This table covers the Fluid temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

3 Fluid Temperature Sensor parts are listed for the 2014 Kia Rio, from GPD, STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: GPD 1814541, STANDARD MOTOR PRODUCTS TX300 and WELLS 5S15269.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts for the 2014 Kia Rio come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 711014 and WJB / INMOTION PARTS WS711014.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

3 Output Shaft Repair Sleeve parts are listed for the 2014 Kia Rio, from BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS99145, NATIONAL 99145 and WJB / INMOTION PARTS WS99145.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Output Shaft Seal parts are listed for the 2014 Kia Rio, from SKF, HYUNDAI, NATIONAL and 1 other brand. SKF 14627A carries the "Popular" badge.

Part numbers include SKF 14627A, HYUNDAI 4311939020 and NATIONAL 710997, among others listed above.

This table covers the Shift Improvement kits. Read more

One part is listed for the 2014 Kia Rio — TRANSGO SKA6MF.

This table covers the Shift Interlock solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2014 Kia Rio — WELLS 2N1393.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

4 Shift Solenoid parts for the 2014 Kia Rio come from 3 brands — STANDARD MOTOR PRODUCTS, ACKOJA and HYUNDAI.

Part numbers include ACKOJA A52770022, HYUNDAI 463133B030 and STANDARD MOTOR PRODUCTS TCS325, among others listed above.

This table covers the Sun Gear bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Sun Gear Bushing parts for the 2014 Kia Rio come from DURA-BOND.

Part numbers include DURA-BOND MIT24BR and DURA-BOND MIT25.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Torque Converter Shaft Seal parts for the 2014 Kia Rio come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand. The "Popular" part is NATIONAL 320583.

This group includes NATIONAL 320583, BCA NS320583 and BCA NS710615 and the remaining parts above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

15 Transmission Fluid parts are listed for the 2014 Kia Rio, from VALVOLINE, LIQUI MOLY, PENTOSIN and 6 other brands. ACDELCO 109243 carries the "Popular" badge.

The ATF 64 section lists 2 options from PENTOSIN — grouped under the catalog's "ATF 64" designation — the notes column spells out what sets them apart. PENTOSIN 1058113 is listed in this group.

In the Dexron grade, ACDELCO supplies 1 part: grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109243.

In the Multi-Vehicle grade, VALVOLINE, LIQUI MOLY, MOBIL and 1 other brand supply 8 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 126505.

The SP-IV (SP 4) section lists 2 options from AISIN and IDEMITSU — grouped under the catalog's "SP-IV (SP 4)" designation — the notes column spells out what sets them apart. AISIN ATFSP4 is listed in this group.

In the ZF Fluid grade, ZF supplies 1 part: grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. A representative part number is ZF 5961308625.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

LUBEGARD supplies the 7 Transmission Fluid Additive parts for the 2014 Kia Rio. LUBEGARD 19610 carries the "Popular" badge.

Listed part numbers: LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 61910, plus the other parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Transmission Mount parts for the 2014 Kia Rio come from 6 brands — ANCHOR, WESTAR, BECK/ARNLEY and 3 other brands. The "Popular" part is ANCHOR 9758.

Part numbers include ANCHOR 9758, WESTAR EM7090 and BECK/ARNLEY 1042080, among others listed above.

This table covers the gaskets that seal the Valve Body. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: FEL-PRO 50967.